Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC18F25K50T-I/ML
Details bekijken DataSheets

PIC18F25K50T-I/ML

Product Overview

Category

The PIC18F25K50T-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash program memory
  • Low power consumption
  • Enhanced peripheral integration
  • USB connectivity
  • Wide operating voltage range
  • Small form factor

Package

The PIC18F25K50T-I/ML is available in a small outline 28-pin package (ML).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic applications.

Packaging/Quantity

The PIC18F25K50T-I/ML is typically packaged in reels or tubes, with a quantity of 1000 units per package.

Specifications

  • Architecture: 8-bit
  • Program Memory Size: 32 KB
  • RAM Size: 2 KB
  • Number of I/O Pins: 25
  • Operating Voltage Range: 2.3V to 5.5V
  • Maximum CPU Speed: 48 MHz
  • Communication Interfaces: UART, SPI, I2C, USB
  • Analog-to-Digital Converter (ADC) Channels: 10
  • Timers: 4
  • Comparators: 2
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC18F25K50T-I/ML has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VPP/MCLR/VPP pin
  2. RA0/AN0/C12IN0-/CVREF-/VREF-
  3. RA1/AN1/C12IN1-/VREF+
  4. RA2/AN2/VREF-/C12IN2-/CVREF+
  5. RA3/AN3/VREF+/C12IN3-/VBUS
  6. RA4/T0CKI/C1OUT/RCV
  7. RA5/AN4/SS/HLVDIN/CLKO/C2OUT
  8. VSS (Ground)
  9. RA7/OSC1/CLKI
  10. RA6/OSC2/CLKO
  11. RB0/INT0/FLT0/SDI/SDA
  12. RB1/INT1/FLT1/SDO/SCL
  13. RB2/INT2/FLT2/CCP2/P1B
  14. RB3/INT3/CCP3/P1C
  15. RB4/KBI0/PGM
  16. RB5/KBI1/PGC
  17. RB6/KBI2/PGD
  18. RB7/KBI3/PGM
  19. VDD (Power)
  20. RC0/T1OSO/T13CKI/CCP2/P1A
  21. RC1/T1OSI/CCP4/P1D
  22. RC2/CCP1/P1B
  23. RC3/SCK/SCL/CCP2/P1C
  24. RC4/SDO/SDA/CCP3/P1D
  25. RC5/SDI/SDA/CCP4/P1A
  26. RC6/TX/CK
  27. RC7/RX/DT
  28. VUSB

Functional Features

The PIC18F25K50T-I/ML offers a range of functional features that enhance its performance and versatility. Some notable features include:

  • USB connectivity for easy interfacing with other devices
  • Enhanced peripheral integration, including UART, SPI, and I2C communication interfaces
  • High-speed operation with a maximum CPU speed of 48 MHz
  • On-chip analog-to-digital converter (ADC) for precise analog signal measurement
  • Multiple timers and comparators for accurate timing and control

Advantages and Disadvantages

Advantages

  • High-performance architecture enables efficient processing capabilities
  • Low power consumption for extended battery life in portable applications
  • USB connectivity simplifies data transfer and communication
  • Wide operating voltage range allows compatibility with various power sources
  • Small form factor facilitates integration into compact designs

Disadvantages

  • Limited program memory size compared to higher-end microcontrollers
  • Limited number of I/O pins may restrict the complexity of certain applications
  • Lack of advanced features found in more specialized microcontrollers

Working Principles

The PIC18F25K50T-I/ML operates based on an 8-bit architecture. It executes instructions stored in its flash program memory to perform various tasks. The microcontroller interacts with external components through its I/O pins, enabling input/output operations and

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC18F25K50T-I/ML in technische oplossingen

  1. Question: What is the maximum operating frequency of PIC18F25K50T-I/ML?
    Answer: The maximum operating frequency of PIC18F25K50T-I/ML is 64 MHz.

  2. Question: What are the key features of PIC18F25K50T-I/ML?
    Answer: PIC18F25K50T-I/ML features include USB 2.0, 32 KB Flash program memory, and 3.5 KB RAM.

  3. Question: Can PIC18F25K50T-I/ML be used for USB applications?
    Answer: Yes, PIC18F25K50T-I/ML is suitable for USB applications due to its built-in USB 2.0 module.

  4. Question: What voltage range does PIC18F25K50T-I/ML support?
    Answer: PIC18F25K50T-I/ML supports a voltage range of 2.0V to 5.5V.

  5. Question: Is PIC18F25K50T-I/ML suitable for low-power applications?
    Answer: Yes, PIC18F25K50T-I/ML is suitable for low-power applications with its low-power modes and features.

  6. Question: What communication interfaces does PIC18F25K50T-I/ML support?
    Answer: PIC18F25K50T-I/ML supports SPI, I2C, and UART communication interfaces.

  7. Question: Can PIC18F25K50T-I/ML be used in industrial control systems?
    Answer: Yes, PIC18F25K50T-I/ML is suitable for industrial control systems due to its robust features and peripherals.

  8. Question: Does PIC18F25K50T-I/ML have analog-to-digital conversion capabilities?
    Answer: Yes, PIC18F25K50T-I/ML has 10-bit analog-to-digital conversion (ADC) with up to 13 channels.

  9. Question: What development tools are available for PIC18F25K50T-I/ML?
    Answer: Development tools such as MPLAB X IDE and MPLAB Code Configurator support PIC18F25K50T-I/ML.

  10. Question: Is PIC18F25K50T-I/ML suitable for automotive applications?
    Answer: Yes, PIC18F25K50T-I/ML is suitable for automotive applications with its robust design and temperature range.