Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC18F2510-E/SP
Details bekijken DataSheets

PIC18F2510-E/SP

Product Overview

Category

The PIC18F2510-E/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash memory for program storage
  • Integrated peripherals for versatile functionality
  • Low power consumption
  • Wide operating voltage range
  • Robust communication interfaces

Package

The PIC18F2510-E/SP is available in a small outline, plastic dual inline package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC18F2510-E/SP is typically packaged in reels or tubes, with a quantity of 25 units per package.

Specifications

  • Architecture: 8-bit
  • Program Memory Size: 32 KB
  • RAM Size: 2 KB
  • Operating Voltage Range: 2.0V to 5.5V
  • Maximum CPU Speed: 40 MHz
  • Number of I/O Pins: 25
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC) Channels: 10
  • Timers/Counters: 3
  • PWM Outputs: 2
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18F2510-E/SP has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RB0/INT0 - External interrupt input
  18. RB1/INT1 - External interrupt input
  19. RB2/INT2 - External interrupt input
  20. RB3/CCP2 - Capture/Compare/PWM pin
  21. RB4/SDI - Serial data input
  22. RB5/SDO - Serial data output
  23. RB6/SCK - Serial clock input
  24. RB7/TX/CK - UART transmit/output/clock
  25. RB7/RX/DT - UART receive/input/data
  26. RB7/PGM - In-Circuit Serial Programming pin
  27. VDD - Power supply voltage
  28. VSS - Ground

Functional Features

The PIC18F2510-E/SP offers a range of functional features, including:

  • High-speed processing capabilities
  • Flash memory for program storage and easy updates
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • Analog-to-Digital Converter (ADC) for precise analog measurements
  • Timers and counters for accurate timing operations
  • Pulse Width Modulation (PWM) outputs for controlling analog devices
  • Low power consumption modes for energy efficiency
  • Robust protection features to ensure reliable operation

Advantages and Disadvantages

Advantages

  • High-performance 8-bit architecture for efficient processing
  • Versatile communication interfaces for seamless integration with other devices
  • Compact form factor for space-constrained applications
  • Low power consumption for extended battery life
  • Wide operating voltage range for flexibility in various environments

Disadvantages

  • Limited program memory size compared to higher-end microcontrollers
  • Limited number of I/O pins for complex applications
  • Lack of advanced features found in more advanced microcontrollers

Working Principles

The PIC18F2510-E/SP operates based on the principles of a typical microcontroller. It executes instructions stored in its flash memory, interacts with peripherals and external devices through its I/O pins, and performs various tasks according to the programmed logic.

Detailed Application Field Plans

The PIC18F2510-E/SP finds applications in a wide range of fields, including:

  1. Industrial automation: Control systems, monitoring devices, and data acquisition units.
  2. Consumer electronics: Home appliances, gaming consoles, and remote controls.
  3. Automotive: Engine control units, dashboard displays, and vehicle diagnostics.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC18F2510-E/SP in technische oplossingen

  1. What is the maximum operating frequency of PIC18F2510-E/SP?
    - The maximum operating frequency of PIC18F2510-E/SP is 40 MHz.

  2. How many I/O pins does PIC18F2510-E/SP have?
    - PIC18F2510-E/SP has 36 I/O pins.

  3. What are the communication interfaces supported by PIC18F2510-E/SP?
    - PIC18F2510-E/SP supports SPI, I2C, and UART communication interfaces.

  4. Can PIC18F2510-E/SP be used for motor control applications?
    - Yes, PIC18F2510-E/SP can be used for motor control applications with its integrated PWM modules.

  5. What is the flash memory size of PIC18F2510-E/SP?
    - PIC18F2510-E/SP has 32 KB of flash memory.

  6. Does PIC18F2510-E/SP support analog-to-digital conversion?
    - Yes, PIC18F2510-E/SP has a 10-bit ADC module for analog-to-digital conversion.

  7. Can PIC18F2510-E/SP operate in low power modes?
    - Yes, PIC18F2510-E/SP supports low power modes for energy-efficient operation.

  8. Is PIC18F2510-E/SP suitable for embedded control applications?
    - Yes, PIC18F2510-E/SP is well-suited for embedded control applications due to its features and peripherals.

  9. What development tools are available for programming PIC18F2510-E/SP?
    - Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC18F2510-E/SP.

  10. Are there any application notes or reference designs available for PIC18F2510-E/SP?
    - Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC18F2510-E/SP in technical solutions.