Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC16LF1825T-I/ML
Details bekijken DataSheets

PIC16LF1825T-I/ML

Introduction

The PIC16LF1825T-I/ML is a microcontroller belonging to the PIC16 family of microcontrollers produced by Microchip Technology. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: The PIC16LF1825T-I/ML is used for embedded control applications in various electronic devices.
  • Characteristics: Low-power consumption, high performance, and versatile peripherals.
  • Package: 20-pin QFN (Quad Flat No-Lead) package.
  • Essence: The microcontroller integrates a wide range of features and peripherals into a small form factor.
  • Packaging/Quantity: Available in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 32 MHz
  • Program Memory Size: 3.5 KB
  • RAM Size: 256 Bytes
  • Digital I/O Pins: 18
  • Analog Input Pins: 12
  • Communication Interfaces: SPI, I2C, UART
  • Operating Voltage Range: 1.8V to 5.5V
  • Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The PIC16LF1825T-I/ML features a 20-pin QFN package with the following pin configuration: 1. VDD 2. RA0/AN0 3. RA1/AN1 4. RA2/AN2 5. RA3/AN3 6. RA4/T0CKI/C1OUT 7. RC0/T1OSO/T1CKI/CCP1 8. RC1/T1OSI/CCP2 9. RC2/SDI/SDA 10. RC3/SDO 11. RC4/SCK/SCL 12. RC5/TX/CK 13. RC6/RX/DT 14. RC7/CCP3 15. VSS 16. OSC1/CLKIN 17. OSC2/CLKOUT 18. RB4/AN10/KBI0 19. RB5/AN11/KBI1/PGM 20. RB7/KBI2/PGC

Functional Features

The PIC16LF1825T-I/ML offers the following functional features: - Integrated analog-to-digital converter (ADC) - Enhanced capture/compare/PWM (ECCP) module - Universal synchronous asynchronous receiver transmitter (USART) - Master synchronous serial port (MSSP) with SPI and I2C support - Internal and external oscillator options - Power-on reset (POR), power-up timer (PWRT), and brown-out reset (BOR)

Advantages and Disadvantages

Advantages

  • Low-power consumption makes it suitable for battery-powered applications.
  • Versatile peripherals enable a wide range of application possibilities.
  • Compact form factor allows for integration into space-constrained designs.

Disadvantages

  • Limited program memory and RAM may restrict the complexity of applications.
  • 8-bit architecture may not be suitable for computationally intensive tasks.

Working Principles

The PIC16LF1825T-I/ML operates based on the Harvard architecture, featuring separate program and data memories. It executes instructions from program memory and utilizes its integrated peripherals to interact with external components and sensors. The microcontroller's low-power design enables it to operate efficiently in battery-powered or energy-conscious applications.

Detailed Application Field Plans

The PIC16LF1825T-I/ML is well-suited for various embedded control applications, including but not limited to: - Home automation systems - Sensor nodes for IoT (Internet of Things) devices - Battery-powered portable devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the PIC16LF1825T-I/ML include: - PIC16LF1824 - PIC16LF1823 - PIC16LF1822 - PIC16LF1829

These alternative models offer varying combinations of features and peripherals, allowing designers to select the most suitable microcontroller for their specific application requirements.

In conclusion, the PIC16LF1825T-I/ML is a versatile microcontroller with low-power consumption, high performance, and a range of integrated peripherals, making it suitable for a wide array of embedded control applications.

Word count: 634

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC16LF1825T-I/ML in technische oplossingen

  1. What is the operating voltage range of PIC16LF1825T-I/ML?
    - The operating voltage range of PIC16LF1825T-I/ML is 1.8V to 3.6V.

  2. Can PIC16LF1825T-I/ML be used for battery-powered applications?
    - Yes, PIC16LF1825T-I/ML is suitable for battery-powered applications due to its low operating voltage and low power consumption.

  3. What are the key features of PIC16LF1825T-I/ML that make it suitable for technical solutions?
    - Some key features include low power consumption, multiple communication interfaces, and a wide operating voltage range.

  4. Is PIC16LF1825T-I/ML suitable for sensor interfacing applications?
    - Yes, PIC16LF1825T-I/ML can be used for sensor interfacing due to its analog-to-digital converter (ADC) and various communication interfaces.

  5. Can PIC16LF1825T-I/ML be programmed using C language?
    - Yes, PIC16LF1825T-I/ML can be programmed using C language with the appropriate compiler and development tools.

  6. What are the available memory options for program storage in PIC16LF1825T-I/ML?
    - PIC16LF1825T-I/ML offers flash program memory ranging from 3.5KB to 7KB, depending on the specific variant.

  7. Does PIC16LF1825T-I/ML support interrupt handling?
    - Yes, PIC16LF1825T-I/ML supports interrupt handling for efficient event-driven programming.

  8. Can PIC16LF1825T-I/ML be used in industrial control applications?
    - Yes, PIC16LF1825T-I/ML is suitable for industrial control applications due to its robust features and communication capabilities.

  9. What are the available communication interfaces in PIC16LF1825T-I/ML?
    - PIC16LF1825T-I/ML supports interfaces such as I2C, SPI, and USART for versatile connectivity options.

  10. Is PIC16LF1825T-I/ML RoHS compliant?
    - Yes, PIC16LF1825T-I/ML is RoHS compliant, making it suitable for environmentally conscious designs.