Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC16F1777-E/ML
Details bekijken DataSheets

PIC16F1777-E/ML

Product Overview

Category

The PIC16F1777-E/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit RISC architecture
  • Flash program memory with self-read/write capability
  • Enhanced mid-range core with 49 instructions
  • Low power consumption
  • Wide operating voltage range
  • Multiple communication interfaces (UART, SPI, I2C)
  • Analog-to-Digital Converter (ADC) module
  • Timers and PWM modules for precise timing control

Package

The PIC16F1777-E/ML is available in a small form factor package known as QFN (Quad Flat No-Lead). This package offers a compact size and allows for easy integration into space-constrained designs.

Essence

The essence of the PIC16F1777-E/ML lies in its ability to provide a cost-effective solution for applications requiring advanced control and processing capabilities in a small footprint.

Packaging/Quantity

This microcontroller is typically packaged in reels or tubes, containing a specific quantity of units per package. The exact packaging and quantity may vary depending on the supplier and customer requirements.

Specifications

  • Microcontroller Family: PIC16F
  • Core Size: 8-bit
  • Program Memory Size: 14KB
  • RAM Size: 1KB
  • Number of I/O Pins: 25
  • Operating Voltage Range: 1.8V to 5.5V
  • Maximum Clock Frequency: 32MHz
  • Communication Interfaces: UART, SPI, I2C
  • ADC Resolution: 10-bit
  • Timers: 3
  • PWM Channels: 4

Detailed Pin Configuration

The PIC16F1777-E/ML has a total of 25 I/O pins, each serving a specific purpose. The pin configuration is as follows:

  1. RA0 - Analog Input/Output
  2. RA1 - Analog Input/Output
  3. RA2 - Analog Input/Output
  4. RA3 - Analog Input/Output
  5. RA4 - Digital Input/Output
  6. RA5 - Digital Input/Output
  7. RB0 - Digital Input/Output
  8. RB1 - Digital Input/Output
  9. RB2 - Digital Input/Output
  10. RB3 - Digital Input/Output
  11. RB4 - Digital Input/Output
  12. RB5 - Digital Input/Output
  13. RB6 - Digital Input/Output
  14. RB7 - Digital Input/Output
  15. RC0 - Digital Input/Output
  16. RC1 - Digital Input/Output
  17. RC2 - Digital Input/Output
  18. RC3 - Digital Input/Output
  19. RC4 - Digital Input/Output
  20. RC5 - Digital Input/Output
  21. RC6 - Digital Input/Output
  22. RC7 - Digital Input/Output
  23. RD0 - Digital Input/Output
  24. VSS - Ground
  25. VDD - Power Supply

Functional Features

The PIC16F1777-E/ML offers several functional features that enhance its usability and performance in various applications:

  1. Flash Program Memory: Allows for easy reprogramming of the microcontroller's firmware.
  2. Enhanced Mid-Range Core: Provides a wide range of instructions for efficient code execution.
  3. Low Power Consumption: Enables energy-efficient operation, making it suitable for battery-powered devices.
  4. Communication Interfaces: UART, SPI, and I2C interfaces facilitate seamless communication with other devices.
  5. Analog-to-Digital Converter (ADC) Module: Enables the microcontroller to convert analog signals into digital data for processing.
  6. Timers and PWM Modules: Precise timing control and generation of PWM signals for applications such as motor control and LED dimming.

Advantages and Disadvantages

Advantages

  • Cost-effective solution for embedded systems
  • Wide operating voltage range allows for flexibility in power supply selection
  • Multiple communication interfaces enable seamless integration with other devices
  • Low power consumption extends battery life in portable applications
  • Compact package size facilitates space-constrained designs

Disadvantages

  • Limited program memory size compared to higher-end microcontrollers
  • Limited RAM size may restrict the complexity of applications that can be implemented
  • 8-bit architecture may not be suitable for computationally intensive tasks

Working Principles

The PIC16F1777-E/ML operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with external devices through various communication interfaces, and performs data processing tasks using its core and peripherals.

Upon power-up, the microcontroller initializes its internal registers and begins executing the program stored in its flash memory. It can read inputs from

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC16F1777-E/ML in technische oplossingen

  1. What is the maximum operating frequency of PIC16F1777-E/ML?
    - The maximum operating frequency of PIC16F1777-E/ML is 32 MHz.

  2. Can PIC16F1777-E/ML be used for motor control applications?
    - Yes, PIC16F1777-E/ML can be used for motor control applications with its integrated motor control peripherals.

  3. Does PIC16F1777-E/ML support communication protocols like I2C and SPI?
    - Yes, PIC16F1777-E/ML supports communication protocols such as I2C and SPI.

  4. What are the available memory options for program storage in PIC16F1777-E/ML?
    - PIC16F1777-E/ML offers flash program memory options ranging from 14 KB to 28 KB.

  5. Can PIC16F1777-E/ML operate at low power?
    - Yes, PIC16F1777-E/ML features low-power modes for efficient energy consumption.

  6. Is PIC16F1777-E/ML suitable for sensor interfacing applications?
    - Yes, PIC16F1777-E/ML is suitable for sensor interfacing with its analog and digital peripherals.

  7. What development tools are compatible with PIC16F1777-E/ML?
    - PIC16F1777-E/ML is supported by various development tools such as MPLAB X IDE and MPLAB Code Configurator.

  8. Does PIC16F1777-E/ML have built-in security features?
    - Yes, PIC16F1777-E/ML provides security features such as code protection and data EEPROM memory.

  9. Can PIC16F1777-E/ML be used in automotive applications?
    - Yes, PIC16F1777-E/ML is suitable for automotive applications with its robust design and temperature range.

  10. Are there application notes and reference designs available for PIC16F1777-E/ML?
    - Yes, Microchip provides comprehensive application notes and reference designs for utilizing PIC16F1777-E/ML in various technical solutions.