Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC16F1769-I/P
Details bekijken DataSheets

PIC16F1769-I/P

Product Overview

Category

The PIC16F1769-I/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Enhanced peripheral integration
  • Wide operating voltage range
  • Flash program memory
  • EEPROM data memory
  • I/O pins with various functionalities

Package

The PIC16F1769-I/P is available in a 20-pin plastic dual inline package (PDIP).

Essence

The essence of the PIC16F1769-I/P lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC16F1769-I/P is typically packaged in reels or tubes, with a quantity of 100 units per package.

Specifications

  • Microcontroller Family: PIC16F
  • Core Size: 8-bit
  • CPU Speed: Up to 32 MHz
  • Program Memory Size: 14 KB
  • RAM Size: 1.5 KB
  • Number of I/O Pins: 18
  • ADC Channels: 11
  • Timers: 3
  • Communication Interfaces: UART, SPI, I2C
  • Operating Voltage Range: 1.8V to 5.5V
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC16F1769-I/P has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. RA5/AN4/C2OUT/VREF-/CVREF
  2. RA4/AN3/T0CKI/C1OUT/VREF+
  3. RA3/AN2/CLKOUT/LVDIN
  4. RA2/AN1/CLKIN
  5. RA1/AN0/C2IN-
  6. RA0/AN5/C2IN+
  7. VSS
  8. VDD
  9. RC5/TX/CK
  10. RC4/RX/DT
  11. RC3/SCL/SCK
  12. RC2/SDA/SDI/SDO
  13. RC1/CCP2
  14. RC0/CCP1
  15. RB7/KBI3/PGD
  16. RB6/KBI2/PGC
  17. RB5/KBI1/PGM
  18. RB4/KBI0/PGM
  19. RB3/CCP4/PGM
  20. RB2/CCP3/PGM

Functional Features

  • Enhanced Capture/Compare/PWM (CCP) modules for precise timing control
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • Serial communication interfaces (UART, SPI, I2C) for data exchange
  • Timers for accurate timekeeping and event triggering
  • Low-power modes for energy efficiency
  • Interrupt capability for handling real-time events
  • Flexible I/O pins with various functionalities

Advantages and Disadvantages

Advantages

  • High performance and low power consumption
  • Wide operating voltage range allows compatibility with different power sources
  • Enhanced peripheral integration reduces the need for external components
  • Flash program memory enables easy firmware updates
  • Compact form factor suitable for space-constrained applications

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Limited RAM size may impose constraints on data storage and manipulation
  • 8-bit core may not be sufficient for certain computationally intensive tasks

Working Principles

The PIC16F1769-I/P operates based on the Von Neumann architecture, where it fetches instructions from program memory and executes them sequentially. It utilizes a combination of hardware and software to perform various tasks, including data processing, I/O control, and communication.

Detailed Application Field Plans

The PIC16F1769-I/P finds applications in a wide range of fields, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Medical devices - Consumer electronics - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the PIC16F1769-I/P include: - PIC16F1768 - PIC16F1767 - PIC16F1766 - PIC16F1765

These models belong to the same microcontroller family and offer varying specifications to cater to different application requirements.

In conclusion, the PIC16F1769-I/P is an 8-bit microcontroller with enhanced peripheral integration, low power consumption, and a wide operating voltage range. It is widely used in various electronic devices and embedded systems for control and data processing. While it has advantages such as high performance and compact

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC16F1769-I/P in technische oplossingen

  1. What is the maximum operating frequency of PIC16F1769-I/P?
    - The maximum operating frequency of PIC16F1769-I/P is 32 MHz.

  2. Can PIC16F1769-I/P be used for motor control applications?
    - Yes, PIC16F1769-I/P can be used for motor control applications with its integrated peripherals and PWM capabilities.

  3. Does PIC16F1769-I/P support communication protocols like SPI and I2C?
    - Yes, PIC16F1769-I/P supports both SPI and I2C communication protocols.

  4. What are the available memory options for program storage in PIC16F1769-I/P?
    - PIC16F1769-I/P offers flash program memory ranging from 14 to 28 KB.

  5. Is there an integrated analog-to-digital converter (ADC) in PIC16F1769-I/P?
    - Yes, PIC16F1769-I/P features a 10-bit ADC with multiple channels.

  6. Can PIC16F1769-I/P operate at low power levels?
    - Yes, PIC16F1769-I/P has low-power modes and features to optimize power consumption.

  7. Are there development tools and software available for programming PIC16F1769-I/P?
    - Yes, Microchip provides development tools and software such as MPLAB X IDE for programming PIC16F1769-I/P.

  8. What are the input/output options available on PIC16F1769-I/P?
    - PIC16F1769-I/P offers a variety of digital and analog input/output pins for interfacing with external components.

  9. Can PIC16F1769-I/P be used in automotive applications?
    - Yes, PIC16F1769-I/P is suitable for automotive applications with its robust features and temperature range.

  10. Are there any application notes or reference designs available for using PIC16F1769-I/P in technical solutions?
    - Yes, Microchip provides application notes and reference designs to assist in implementing PIC16F1769-I/P in various technical solutions.