Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC16C717/P
Details bekijken DataSheets

PIC16C717/P

Product Overview

Category

The PIC16C717/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and managing tasks.

Characteristics

  • Low power consumption
  • High performance
  • Compact size
  • Versatile functionality

Package

The PIC16C717/P is available in a compact package, making it suitable for space-constrained applications.

Essence

The essence of the PIC16C717/P lies in its ability to provide efficient control and management capabilities in electronic devices.

Packaging/Quantity

This microcontroller is typically packaged individually or in reels, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 20 MHz
  • Program Memory Size: 2 KB
  • RAM Size: 128 bytes
  • Number of I/O Pins: 12
  • Operating Voltage Range: 2.5V to 5.5V
  • Communication Interfaces: USART, SPI, I2C
  • Timers: 1 x 8-bit, 1 x 16-bit
  • ADC Channels: 4
  • PWM Channels: 2

Detailed Pin Configuration

The PIC16C717/P has a total of 14 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage input
  2. RA0/AN0 - Analog input or digital I/O pin
  3. RA1/AN1 - Analog input or digital I/O pin
  4. RA2/AN2 - Analog input or digital I/O pin
  5. RA3/AN3 - Analog input or digital I/O pin
  6. RC0/T1OSO/T1CKI - Timer1 oscillator output or external clock input
  7. RC1/T1OSI/CCP2 - Timer1 oscillator input or CCP2 multiplexed pin
  8. RC2/CCP1 - CCP1 multiplexed pin
  9. RC3/SCK/SCL - SPI/I2C clock input
  10. RC4/SDI/SDA - SPI/I2C data input
  11. RC5/SDO - SPI data output
  12. RC6/TX/CK - USART transmit or synchronous clock output
  13. RC7/RX/DT - USART receive or asynchronous data input
  14. VSS - Ground

Functional Features

  • Enhanced core architecture for improved performance
  • Flexible communication interfaces for seamless integration with other devices
  • On-chip timers and PWM channels for precise timing and control
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • Low power consumption modes for energy-efficient operation

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small-scale applications
  • Versatile functionality enables a wide range of applications
  • Low power consumption prolongs battery life in portable devices
  • High-performance architecture ensures efficient task execution

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Limited number of I/O pins may limit the connectivity options in larger systems

Working Principles

The PIC16C717/P operates based on an 8-bit architecture, where instructions are executed sequentially. It utilizes a combination of hardware and software to perform various tasks, including data processing, communication, and control. The microcontroller follows a set of instructions stored in its program memory, which are fetched, decoded, and executed to carry out specific operations.

Detailed Application Field Plans

The PIC16C717/P finds applications in various fields, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the PIC16C717/P microcontroller include: - PIC16F877A - PIC18F4520 - ATmega328P - STM32F103C8T6 - MSP430G2553

These alternative models offer similar functionalities and can be used as substitutes depending on specific requirements.

In conclusion, the PIC16C717/P microcontroller is a versatile and compact device that provides efficient control and management capabilities in various electronic applications. Its low power consumption, high performance, and flexible functionality make it suitable for a wide range of embedded systems.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC16C717/P in technische oplossingen

  1. What is the maximum operating frequency of PIC16C717/P?
    - The maximum operating frequency of PIC16C717/P is 20 MHz.

  2. How many I/O pins does PIC16C717/P have?
    - PIC16C717/P has 33 I/O pins.

  3. What are the key features of PIC16C717/P?
    - Some key features of PIC16C717/P include 8-bit CPU, 14-bit instruction word, and 2K x 14 words of Flash program memory.

  4. Can PIC16C717/P be used in automotive applications?
    - Yes, PIC16C717/P is suitable for automotive applications due to its robust design and wide operating voltage range.

  5. Does PIC16C717/P support analog-to-digital conversion?
    - Yes, PIC16C717/P features an integrated 10-bit ADC module.

  6. What development tools are available for programming PIC16C717/P?
    - Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC16C717/P.

  7. Is PIC16C717/P compatible with other microcontrollers?
    - PIC16C717/P is compatible with other PICmicro® devices and can communicate with various peripherals using standard communication protocols.

  8. What are the power requirements for PIC16C717/P?
    - PIC16C717/P operates within a wide voltage range of 2.0V to 5.5V, making it suitable for various power supply configurations.

  9. Can PIC16C717/P be used in low-power applications?
    - Yes, PIC16C717/P features multiple low-power modes, making it suitable for battery-powered and energy-efficient applications.

  10. Are there any application notes or reference designs available for PIC16C717/P?
    - Yes, Microchip provides a comprehensive set of application notes and reference designs to assist in the implementation of PIC16C717/P in technical solutions.