Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC16C64A-04/P
Details bekijken DataSheets

PIC16C64A-04/P

Product Overview

Category

The PIC16C64A-04/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • Low power consumption
  • High-performance RISC architecture
  • Wide operating voltage range
  • On-chip program memory
  • Multiple I/O ports
  • Timers and counters
  • Analog-to-digital converter (ADC)
  • Serial communication interface

Package

The PIC16C64A-04/P is available in a 40-pin PDIP (Plastic Dual In-line Package) format.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing functions within a compact package.

Packaging/Quantity

The PIC16C64A-04/P is typically packaged in tubes or trays, with quantities varying based on customer requirements.

Specifications

  • Operating Voltage: 2.5V to 5.5V
  • Maximum Clock Frequency: 4 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 368 bytes
  • Number of I/O Pins: 33
  • ADC Resolution: 10-bit
  • Communication Interfaces: USART, SPI, I2C

Detailed Pin Configuration

The PIC16C64A-04/P has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR - Master Clear input
  9. VSS - Ground
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. VDD - Power supply voltage
  19. RC0 - General-purpose I/O pin
  20. RC1 - General-purpose I/O pin
  21. RC2 - General-purpose I/O pin
  22. RC3 - General-purpose I/O pin
  23. RC4 - General-purpose I/O pin
  24. RC5 - General-purpose I/O pin
  25. RC6 - General-purpose I/O pin
  26. RC7 - General-purpose I/O pin
  27. OSC1 - Oscillator input
  28. OSC2 - Oscillator output
  29. VSS - Ground
  30. RD0 - General-purpose I/O pin
  31. RD1 - General-purpose I/O pin
  32. RD2 - General-purpose I/O pin
  33. RD3 - General-purpose I/O pin
  34. RD4 - General-purpose I/O pin
  35. RD5 - General-purpose I/O pin
  36. RD6 - General-purpose I/O pin
  37. RD7 - General-purpose I/O pin
  38. VDD - Power supply voltage
  39. VSS - Ground
  40. RB3/PGM - Programming mode selection

Functional Features

The PIC16C64A-04/P offers a range of functional features that enhance its usability and performance:

  1. High-performance RISC architecture allows for efficient execution of instructions.
  2. On-chip program memory enables the storage of user programs and data.
  3. Multiple I/O ports provide flexibility for interfacing with external devices.
  4. Timers and counters facilitate precise timing and event counting operations.
  5. The built-in ADC allows for analog signal conversion, expanding the microcontroller's capabilities.
  6. Serial communication interfaces (USART, SPI, I2C) enable seamless communication with other devices.

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications.
  • Wide operating voltage range enhances compatibility with various power sources.
  • High-performance RISC architecture ensures efficient execution of instructions.
  • Compact package size allows for integration into space-constrained designs.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Relatively low clock frequency may limit processing speed in demanding applications.
  • Lack of advanced peripherals compared to more modern microcontrollers.

Working Principles

The PIC16C64A-04/P operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its program memory, manipulating data from registers and interacting with

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC16C64A-04/P in technische oplossingen

  1. What is the maximum clock frequency of PIC16C64A-04/P?
    - The maximum clock frequency of PIC16C64A-04/P is 4 MHz.

  2. How many I/O pins does PIC16C64A-04/P have?
    - PIC16C64A-04/P has a total of 22 I/O pins.

  3. What is the program memory size of PIC16C64A-04/P?
    - The program memory size of PIC16C64A-04/P is 7 KB.

  4. Can PIC16C64A-04/P be used for analog input/output applications?
    - Yes, PIC16C64A-04/P has analog input/output capabilities.

  5. What are the communication interfaces supported by PIC16C64A-04/P?
    - PIC16C64A-04/P supports USART and SPI communication interfaces.

  6. Is PIC16C64A-04/P suitable for battery-powered applications?
    - Yes, PIC16C64A-04/P is suitable for battery-powered applications due to its low power consumption.

  7. Does PIC16C64A-04/P have built-in timers/counters?
    - Yes, PIC16C64A-04/P features multiple built-in timers/counters.

  8. Can PIC16C64A-04/P be programmed using C language?
    - Yes, PIC16C64A-04/P can be programmed using C language with appropriate compilers.

  9. What are the available development tools for PIC16C64A-04/P?
    - Development tools such as MPLAB IDE and PICkit programmers are available for PIC16C64A-04/P.

  10. Is PIC16C64A-04/P suitable for industrial control applications?
    - Yes, PIC16C64A-04/P is suitable for industrial control applications due to its robust features and reliability.