PIC16C62A-04I/SP

Product Overview

Category

The PIC16C62A-04I/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

• Low power consumption
• High-performance RISC CPU
• Wide operating voltage range
• On-chip program memory
• Multiple I/O ports
• Timers and counters
• Analog-to-digital converter (ADC)
• Serial communication interface

Package

The PIC16C62A-04I/SP is available in a 28-pin plastic dual inline package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact and versatile package.

Packaging/Quantity

The PIC16C62A-04I/SP is typically packaged in reels or tubes, with a quantity of 25 units per package.

Specifications

• Operating Voltage: 2.5V to 5.5V
• Clock Speed: Up to 20 MHz
• Program Memory Size: 3.5 KB
• RAM Size: 128 bytes
• I/O Pins: 22
• ADC Resolution: 8 bits
• Communication Interfaces: USART, SPI, I2C

Detailed Pin Configuration

The PIC16C62A-04I/SP has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. RA5 - General-purpose I/O pin
8. VSS - Ground
9. OSC1/CLKIN - Oscillator input
10. OSC2/CLKOUT - Oscillator output
11. RC0 - General-purpose I/O pin
12. RC1 - General-purpose I/O pin
13. RC2 - General-purpose I/O pin
14. RC3 - General-purpose I/O pin
15. RC4 - General-purpose I/O pin
16. RC5 - General-purpose I/O pin
17. MCLR/VPP - Master Clear/Voltage Programming Pin
18. RB0/INT - General-purpose I/O pin / External Interrupt
19. RB1 - General-purpose I/O pin
20. RB2 - General-purpose I/O pin
21. RB3 - General-purpose I/O pin
22. RB4 - General-purpose I/O pin
23. RB5 - General-purpose I/O pin
24. RB6 - General-purpose I/O pin
25. RB7 - General-purpose I/O pin
26. VDD - Power supply voltage
27. VSS - Ground
28. RB7/PGM - General-purpose I/O pin / In-Circuit Serial Programming

Functional Features

The PIC16C62A-04I/SP offers the following functional features:

1. High-performance RISC CPU for efficient execution of instructions.
2. On-chip program memory allows storing and executing user-defined code.
3. Multiple I/O ports provide flexibility in interfacing with external devices.
4. Timers and counters enable precise timing and event counting.
5. Analog-to-digital converter (ADC) facilitates analog signal acquisition.
6. Serial communication interfaces (USART, SPI, I2C) enable data exchange with other devices.

Advantages and Disadvantages

Advantages

• Low power consumption makes it suitable for battery-powered applications.
• Wide operating voltage range allows compatibility with various power sources.
• Compact package size enables integration into space-constrained designs.
• Versatile I/O capabilities provide flexibility in interfacing with external devices.

Disadvantages

• Limited program memory size may restrict the complexity of applications.
• 8-bit ADC resolution may not be sufficient for high-precision analog measurements.
• Lack of advanced communication protocols may limit compatibility with certain devices.

Working Principles

The PIC16C62A-04I/SP operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its program memory, performs calculations, controls I/O operations, and interacts with external devices as per the user-defined code.

Detailed Application Field Plans

The PIC16C62A-04I/SP finds applications in various fields, including but not limited to:

1. Home automation systems
2. Industrial control systems
3. Automotive electronics
4. Medical devices
5. Consumer electronics
6. Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the PIC