Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC10F204-E/P
Details bekijken DataSheets

PIC10F204-E/P

Product Overview

Category

The PIC10F204-E/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for control and automation purposes.

Characteristics

  • Low power consumption
  • Small form factor
  • High performance
  • Cost-effective solution

Package

The PIC10F204-E/P is available in a 8-pin DIP (Dual Inline Package) package.

Essence

This microcontroller is designed to provide efficient and reliable control capabilities for small-scale applications.

Packaging/Quantity

The PIC10F204-E/P is typically sold in reels or tubes, with quantities varying depending on the supplier.

Specifications

  • CPU: 8-bit
  • Program Memory: 512 words
  • Data Memory: 16 bytes
  • Operating Voltage: 2.0V - 5.5V
  • Maximum Speed: 20 MHz
  • I/O Pins: 6
  • Timers: 1
  • ADC Channels: 4
  • Communication Interfaces: None

Detailed Pin Configuration

The PIC10F204-E/P has a total of 8 pins, each serving a specific purpose:

  1. VDD: Power supply voltage input
  2. GP0: General-purpose I/O pin
  3. GP1: General-purpose I/O pin
  4. GP2: General-purpose I/O pin
  5. GP3: General-purpose I/O pin
  6. GP4/MCLR/VPP: General-purpose I/O pin / Master Clear input / Programming voltage input
  7. GP5/AN0: General-purpose I/O pin / Analog input channel 0
  8. VSS: Ground reference

Functional Features

  • Low-power sleep mode for energy efficiency
  • On-chip oscillator for precise timing
  • Timer module for time-based operations
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • General-purpose I/O pins for interfacing with external devices

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for small-scale applications
  • Cost-effective solution for control and automation needs
  • Wide operating voltage range allows for flexibility in power supply options

Disadvantages

  • Limited program memory and data memory may restrict the complexity of applications
  • Lack of communication interfaces limits connectivity options

Working Principles

The PIC10F204-E/P operates based on the principles of a microcontroller. It executes instructions stored in its program memory to perform specific tasks. The input/output pins allow it to interact with external devices, while the timers and ADC enable time-based operations and analog signal processing, respectively.

Detailed Application Field Plans

The PIC10F204-E/P finds applications in various fields, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Consumer electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models to the PIC10F204-E/P microcontroller include: - PIC12F508 - PIC16F54 - ATtiny13A - MSP430G2001 - STM8S003F3

These alternatives offer similar functionalities and can be considered based on specific project requirements.

In conclusion, the PIC10F204-E/P is a versatile microcontroller that offers efficient control capabilities for small-scale applications. Its compact size, low power consumption, and cost-effectiveness make it a popular choice among developers. However, its limited memory and lack of communication interfaces may impose certain limitations. Nonetheless, it remains a reliable solution for various electronic and embedded systems.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC10F204-E/P in technische oplossingen

  1. Question: What is the maximum operating frequency of PIC10F204-E/P?
    Answer: The maximum operating frequency of PIC10F204-E/P is 16 MHz.

  2. Question: Can PIC10F204-E/P be used for low-power applications?
    Answer: Yes, PIC10F204-E/P is suitable for low-power applications due to its low power consumption features.

  3. Question: What are the available communication interfaces on PIC10F204-E/P?
    Answer: PIC10F204-E/P supports I2C and SPI communication interfaces.

  4. Question: Is it possible to program PIC10F204-E/P using C language?
    Answer: Yes, PIC10F204-E/P can be programmed using C language with appropriate compilers and development tools.

  5. Question: What is the maximum number of I/O pins on PIC10F204-E/P?
    Answer: PIC10F204-E/P has 4 I/O pins available for general-purpose use.

  6. Question: Does PIC10F204-E/P have built-in analog-to-digital conversion (ADC) capability?
    Answer: Yes, PIC10F204-E/P features a 8-bit ADC module for analog signal processing.

  7. Question: Can PIC10F204-E/P operate in extreme temperature conditions?
    Answer: PIC10F204-E/P has an extended temperature range and can operate in extreme conditions from -40°C to 125°C.

  8. Question: What programming voltage is required for PIC10F204-E/P?
    Answer: PIC10F204-E/P requires a programming voltage of 4.5V to 5.5V for programming and debugging.

  9. Question: Is there a development board available for PIC10F204-E/P?
    Answer: Yes, there are development boards specifically designed for PIC10F204-E/P to aid in prototyping and testing.

  10. Question: Can PIC10F204-E/P be used in automotive applications?
    Answer: Yes, PIC10F204-E/P is suitable for automotive applications with proper consideration of environmental factors and standards compliance.