Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MIC812MU TR

MIC812MU TR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: Low Voltage Reset Circuit
  • Package: SOT-23-3
  • Essence: Monolithic CMOS IC
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Supply Voltage Range: 1.6V to 5.5V
  • Reset Threshold Voltage: 2.93V
  • Reset Timeout Period: 140ms (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MIC812MU TR has a SOT-23-3 package with the following pin configuration:

  • Pin 1: GND (Ground)
  • Pin 2: VDD (Supply Voltage)
  • Pin 3: RESET (Reset Output)

Functional Features

  • Provides a reset signal when the supply voltage drops below the reset threshold voltage.
  • Monitors the supply voltage continuously.
  • Resets the system until the supply voltage rises above the reset threshold voltage for a specified timeout period.
  • Ensures reliable system startup and operation.

Advantages and Disadvantages

Advantages

  • Small form factor package allows for space-saving designs.
  • Wide supply voltage range enables compatibility with various systems.
  • Low power consumption.
  • High accuracy in detecting supply voltage drop.

Disadvantages

  • Limited number of pins may restrict additional functionality.
  • Reset timeout period is fixed and cannot be adjusted externally.

Working Principles

The MIC812MU TR is a low voltage reset circuit that monitors the supply voltage of a system. When the supply voltage drops below the reset threshold voltage, the reset output is activated. The reset output remains active until the supply voltage rises above the reset threshold voltage for the specified timeout period. This ensures that the system is reset and remains in a reliable state during power-up or voltage fluctuations.

Detailed Application Field Plans

The MIC812MU TR is commonly used in various applications where reliable power management is crucial. Some of the typical application fields include:

  1. Microcontrollers and Microprocessors
  2. Embedded Systems
  3. Battery-Powered Devices
  4. Industrial Control Systems
  5. Automotive Electronics
  6. Consumer Electronics

Detailed and Complete Alternative Models

  • MAX809: Low-Cost Microprocessor Reset Circuits
  • ADM6315: Precision Voltage Monitor with Watchdog Timer
  • TPS3808: Supply Voltage Supervisor with Programmable Delay Time
  • LTC2937: Dual Supply Monitor with Adjustable Reset Timeout

These alternative models offer similar functionality to the MIC812MU TR and can be considered as alternatives based on specific requirements and design constraints.

Word count: 305 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC812MU TR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MIC812MU TR in technical solutions:

  1. Question: What is MIC812MU TR?
    - Answer: MIC812MU TR is a specific model of voltage supervisor IC (Integrated Circuit) manufactured by Microchip Technology.

  2. Question: What is the purpose of MIC812MU TR?
    - Answer: The purpose of MIC812MU TR is to monitor the voltage level of a power supply and provide a reset signal when the voltage falls below a certain threshold.

  3. Question: What is the operating voltage range of MIC812MU TR?
    - Answer: The operating voltage range of MIC812MU TR is typically between 1.6V and 5.5V.

  4. Question: How does MIC812MU TR provide a reset signal?
    - Answer: MIC812MU TR has an open-drain output that pulls low when the monitored voltage falls below the specified threshold, providing a reset signal to the connected system.

  5. Question: Can MIC812MU TR be used in battery-powered applications?
    - Answer: Yes, MIC812MU TR can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Question: What is the typical response time of MIC812MU TR?
    - Answer: The typical response time of MIC812MU TR is around 20 microseconds.

  7. Question: Can MIC812MU TR be used in automotive applications?
    - Answer: Yes, MIC812MU TR is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 qualification and wide temperature range.

  8. Question: Does MIC812MU TR have any built-in protection features?
    - Answer: Yes, MIC812MU TR includes built-in features like overvoltage protection and thermal shutdown to ensure safe operation.

  9. Question: Can multiple MIC812MU TR devices be used in parallel?
    - Answer: Yes, multiple MIC812MU TR devices can be used in parallel to monitor different power supplies or provide redundancy in critical systems.

  10. Question: Is there any specific application note available for MIC812MU TR?
    - Answer: Yes, Microchip Technology provides application notes and reference designs that demonstrate the use of MIC812MU TR in various technical solutions.