MIC5393-MMYMX-T5

Product Overview

Category: Integrated Circuit (IC)
Use: Power Management
Characteristics: High efficiency, low power consumption
Package: Miniature Micro Leadframe Package (MLP)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.7V to 5.5V
Output Voltage Range: 0.8V to 3.6V
Maximum Output Current: 500mA
Dropout Voltage: 200mV at 100mA
Quiescent Current: 50µA
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MIC5393-MMYMX-T5 has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
EN: Enable pin
FB: Feedback pin
VOUT: Output voltage pin

Functional Features

Low dropout voltage for efficient power conversion
Wide input voltage range for versatile applications
Adjustable output voltage for flexibility
Low quiescent current for reduced power consumption
Thermal shutdown and current limit protection for enhanced safety

Advantages and Disadvantages

Advantages: - High efficiency power management - Compact MLP package for space-constrained designs - Wide operating temperature range for various environments

Disadvantages: - Limited maximum output current of 500mA - Dropout voltage may affect performance in low voltage applications

Working Principles

The MIC5393-MMYMX-T5 is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It achieves this by utilizing an internal control circuit that adjusts the output voltage based on the feedback received from the FB pin. The EN pin allows for enabling or disabling the regulator as needed.

Detailed Application Field Plans

The MIC5393-MMYMX-T5 is commonly used in various applications, including but not limited to:

Battery-powered devices
Portable electronic devices
IoT (Internet of Things) devices
Wearable technology
Embedded systems

Detailed and Complete Alternative Models

MIC5392-MMYMX-T5: Similar specifications, lower maximum output current of 300mA
MIC5394-MMYMX-T5: Similar specifications, higher maximum output current of 800mA
MIC5395-MMYMX-T5: Similar specifications, adjustable output voltage range of 0.6V to 3.3V

Note: These alternative models provide similar functionality and can be considered as substitutes for the MIC5393-MMYMX-T5 depending on specific requirements.

Word count: 305 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5393-MMYMX-T5 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MIC5393-MMYMX-T5 in technical solutions:

Q: What is the MIC5393-MMYMX-T5? A: The MIC5393-MMYMX-T5 is a voltage regulator IC (integrated circuit) designed for use in various technical solutions.
Q: What is the input voltage range of the MIC5393-MMYMX-T5? A: The input voltage range of the MIC5393-MMYMX-T5 is typically between 2.7V and 5.5V.
Q: What is the output voltage range of the MIC5393-MMYMX-T5? A: The output voltage range of the MIC5393-MMYMX-T5 can be adjusted from 0.8V to 3.6V.
Q: What is the maximum output current of the MIC5393-MMYMX-T5? A: The MIC5393-MMYMX-T5 can provide a maximum output current of up to 500mA.
Q: Is the MIC5393-MMYMX-T5 suitable for battery-powered applications? A: Yes, the low input voltage range and adjustable output voltage make it suitable for battery-powered applications.
Q: Does the MIC5393-MMYMX-T5 have built-in protection features? A: Yes, the MIC5393-MMYMX-T5 includes overcurrent protection, thermal shutdown, and undervoltage lockout features.
Q: Can the MIC5393-MMYMX-T5 be used in automotive applications? A: Yes, the MIC5393-MMYMX-T5 is designed to meet automotive-grade requirements and can be used in automotive applications.
Q: What is the typical efficiency of the MIC5393-MMYMX-T5? A: The typical efficiency of the MIC5393-MMYMX-T5 is around 90%, depending on the input and output voltage conditions.
Q: Does the MIC5393-MMYMX-T5 require external components for operation? A: Yes, the MIC5393-MMYMX-T5 requires a few external components such as input/output capacitors and resistors for voltage adjustment.
Q: Is there any application note or reference design available for the MIC5393-MMYMX-T5? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing the MIC5393-MMYMX-T5 in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.