Zie specificaties voor productdetails.
MIC5350-PGYMT-TR
Product Overview
Category
The MIC5350-PGYMT-TR belongs to the category of integrated voltage regulators.
Use
This product is primarily used for voltage regulation in electronic circuits.
Characteristics
- Integrated voltage regulator
- High efficiency
- Low dropout voltage
- Small package size
- Low quiescent current
Package
The MIC5350-PGYMT-TR comes in a small outline, thin package (PGYMT) with exposed thermal pad.
Essence
The essence of the MIC5350-PGYMT-TR is its ability to regulate voltage efficiently and reliably in various electronic applications.
Packaging/Quantity
The product is typically packaged in tape and reel format, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 1.2V to 3.6V
- Maximum Output Current: 500mA
- Dropout Voltage: 150mV at 500mA
- Quiescent Current: 35µA
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The MIC5350-PGYMT-TR has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- BYP: Bypass capacitor pin
- FB: Feedback pin
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage ensures efficient power conversion.
- Wide input voltage range allows flexibility in various applications.
- Enable pin provides control over the regulator's operation.
- Bypass capacitor pin improves stability and noise performance.
- Feedback pin enables precise output voltage regulation.
Advantages and Disadvantages
Advantages
- High efficiency leads to reduced power consumption.
- Small package size saves board space.
- Low quiescent current minimizes standby power consumption.
- Wide operating temperature range enables usage in extreme conditions.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage may affect performance in low input voltage scenarios.
Working Principles
The MIC5350-PGYMT-TR operates as a linear voltage regulator. It regulates the output voltage by comparing it with a reference voltage and adjusting the internal pass transistor accordingly. The dropout voltage is minimized to ensure efficient power conversion, while the enable pin allows control over the regulator's operation.
Detailed Application Field Plans
The MIC5350-PGYMT-TR can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial automation
Detailed and Complete Alternative Models
- MIC5365-PGYMT-TR: Similar characteristics and specifications, but with a higher maximum output current of 1A.
- MIC5330-PGYMT-TR: Lower quiescent current and wider input voltage range, suitable for ultra-low power applications.
- MIC5320-PGYMT-TR: Higher output voltage range and lower dropout voltage, ideal for applications requiring precise voltage regulation.
These alternative models provide options based on specific requirements and preferences.
Word count: 408 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5350-PGYMT-TR in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of MIC5350-PGYMT-TR in technical solutions:
Q: What is the operating voltage range of MIC5350-PGYMT-TR? A: The operating voltage range of MIC5350-PGYMT-TR is typically between 2.7V and 5.5V.
Q: What is the maximum output current that MIC5350-PGYMT-TR can provide? A: MIC5350-PGYMT-TR can provide a maximum output current of 500mA.
Q: Can MIC5350-PGYMT-TR be used in battery-powered applications? A: Yes, MIC5350-PGYMT-TR is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.
Q: Does MIC5350-PGYMT-TR have built-in thermal shutdown protection? A: Yes, MIC5350-PGYMT-TR has built-in thermal shutdown protection to prevent overheating.
Q: Is MIC5350-PGYMT-TR compatible with both ceramic and tantalum capacitors? A: Yes, MIC5350-PGYMT-TR is compatible with both ceramic and tantalum capacitors for input and output decoupling.
Q: Can MIC5350-PGYMT-TR operate in a wide temperature range? A: Yes, MIC5350-PGYMT-TR is designed to operate in a wide temperature range from -40°C to +125°C.
Q: Does MIC5350-PGYMT-TR have short-circuit protection? A: Yes, MIC5350-PGYMT-TR has built-in short-circuit protection to safeguard against excessive current draw.
Q: Can MIC5350-PGYMT-TR be used in automotive applications? A: Yes, MIC5350-PGYMT-TR is suitable for automotive applications as it meets the AEC-Q100 standard.
Q: What is the typical dropout voltage of MIC5350-PGYMT-TR? A: The typical dropout voltage of MIC5350-PGYMT-TR is 200mV at 500mA load current.
Q: Is MIC5350-PGYMT-TR available in a small package size? A: Yes, MIC5350-PGYMT-TR is available in a compact 2mm x 2mm MLF® package, making it suitable for space-constrained designs.
Please note that these answers are based on general information and may vary depending on specific application requirements.