Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MIC5319-3.1YD5 TR

MIC5319-3.1YD5 TR

Product Overview

Category

The MIC5319-3.1YD5 TR belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • Low power consumption
  • High efficiency
  • Wide input voltage range

Package

The MIC5319-3.1YD5 TR is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The MIC5319-3.1YD5 TR is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 3.1V
  • Output Current: Up to 500mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC5319-3.1YD5 TR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable pin for power control
  • Stable output voltage under varying load conditions

Advantages and Disadvantages

Advantages

  • Small package size allows for space-saving designs
  • Wide input voltage range enables compatibility with various power sources
  • Low power consumption contributes to energy efficiency
  • High efficiency results in minimal power loss
  • Overcurrent and thermal shutdown protection enhance reliability

Disadvantages

  • Limited output current capacity (up to 500mA)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The MIC5319-3.1YD5 TR operates based on the principle of voltage regulation through a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite changes in input voltage or load conditions.

Detailed Application Field Plans

The MIC5319-3.1YD5 TR finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MIC5319-3.1YD5 TR include: - LM1117-3.3 - LT1763-3.3 - TPS73633DBVR

These models provide comparable voltage regulation capabilities and can be considered as alternatives depending on specific application requirements.

In conclusion, the MIC5319-3.1YD5 TR is a voltage regulator that offers stable and regulated voltage output for electronic devices. Its compact size, wide input voltage range, and low power consumption make it suitable for various applications. However, its limited output current capacity and dropout voltage should be taken into consideration when selecting this product.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5319-3.1YD5 TR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MIC5319-3.1YD5 TR in technical solutions:

Q1: What is the MIC5319-3.1YD5 TR? A1: The MIC5319-3.1YD5 TR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 3.1V.

Q2: What is the input voltage range for the MIC5319-3.1YD5 TR? A2: The input voltage range for the MIC5319-3.1YD5 TR is typically between 2.7V and 5.5V.

Q3: What is the maximum output current of the MIC5319-3.1YD5 TR? A3: The maximum output current of the MIC5319-3.1YD5 TR is 500mA.

Q4: Can the MIC5319-3.1YD5 TR be used in battery-powered applications? A4: Yes, the MIC5319-3.1YD5 TR can be used in battery-powered applications as it has a low dropout voltage and operates efficiently with low input voltages.

Q5: Is the MIC5319-3.1YD5 TR suitable for noise-sensitive applications? A5: Yes, the MIC5319-3.1YD5 TR features excellent line and load regulation, making it suitable for noise-sensitive applications.

Q6: Does the MIC5319-3.1YD5 TR have built-in thermal protection? A6: Yes, the MIC5319-3.1YD5 TR has built-in thermal shutdown protection to prevent overheating.

Q7: Can the MIC5319-3.1YD5 TR be used in automotive applications? A7: Yes, the MIC5319-3.1YD5 TR is AEC-Q100 qualified, making it suitable for automotive applications.

Q8: What is the operating temperature range of the MIC5319-3.1YD5 TR? A8: The operating temperature range of the MIC5319-3.1YD5 TR is typically between -40°C and +125°C.

Q9: Can the MIC5319-3.1YD5 TR be used in space-constrained designs? A9: Yes, the MIC5319-3.1YD5 TR is available in a small package (e.g., 2mm x 2mm) and requires minimal external components, making it suitable for space-constrained designs.

Q10: Is the MIC5319-3.1YD5 TR RoHS compliant? A10: Yes, the MIC5319-3.1YD5 TR is RoHS compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.