MIC5306-2.8YD5

Product Overview

Category

MIC5306-2.8YD5 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

• Package: The MIC5306-2.8YD5 comes in a small form factor package.
• Essence: This voltage regulator provides stable and regulated output voltage.
• Packaging/Quantity: It is typically packaged in reels or tubes, with a quantity of 2500 units per reel.

Specifications

The specifications of MIC5306-2.8YD5 are as follows:

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage: 2.8V
• Output Current: Up to 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 60µA (typical)
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of MIC5306-2.8YD5 is as follows:

1. VIN (Input Voltage)
2. GND (Ground)
3. EN (Enable)
4. BYP (Bypass)
5. VOUT (Output Voltage)

Functional Features

The functional features of MIC5306-2.8YD5 include:

• Low dropout voltage for efficient power conversion.
• Built-in thermal shutdown protection.
• Short-circuit current limit for overcurrent protection.
• Low quiescent current for power-saving applications.
• Enable pin for easy on/off control.

Advantages and Disadvantages

Advantages: - Small form factor package allows for space-saving designs. - Stable and regulated output voltage ensures reliable performance. - Wide input voltage range enables compatibility with various power sources. - Low dropout voltage minimizes power dissipation.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Temperature range may restrict usage in extreme environments.

Working Principles

MIC5306-2.8YD5 operates based on the principle of voltage regulation. It takes an input voltage within the specified range and provides a stable output voltage of 2.8V, regardless of any fluctuations in the input voltage. This is achieved through internal circuitry that adjusts the voltage levels accordingly.

Detailed Application Field Plans

MIC5306-2.8YD5 finds applications in various electronic devices and systems, including but not limited to:

1. Battery-powered devices: It can regulate the voltage for portable electronics such as smartphones, tablets, and wearables.
2. IoT devices: It is suitable for powering sensors, microcontrollers, and communication modules in IoT applications.
3. Industrial equipment: The voltage regulator can be used in control systems, motor drives, and instrumentation devices.
4. Automotive electronics: It can provide stable voltage supply for automotive infotainment systems, lighting modules, and other electronic components.

Detailed and Complete Alternative Models

Some alternative models to MIC5306-2.8YD5 that offer similar functionality include:

1. LM1117-2.8: A popular linear voltage regulator with a fixed output voltage of 2.8V.
2. TPS79928: An ultra-low-power LDO regulator with a 2.8V output voltage and low dropout voltage.
3. AP2112-2.8: A compact and efficient voltage regulator with a fixed 2.8V output and thermal shutdown protection.

These alternative models can be considered based on specific requirements and design constraints.

In conclusion, MIC5306-2.8YD5 is a voltage regulator that provides stable and regulated output voltage. Its small form factor, wide input voltage range, and low dropout voltage make it suitable for various electronic applications. However, its limited output current and temperature range should be taken into consideration during design. Alternative models such as LM1117-2.8, TPS79928, and AP2112-2.8 offer similar functionality and can be explored as alternatives.