Zie specificaties voor productdetails.
MIC5253-1.8BC5
Product Overview
Category
MIC5253-1.8BC5 belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.3V to 5.5V
- Output Voltage: 1.8V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV
- Low Quiescent Current: 40µA
- Low Shutdown Current: 0.1µA
- Thermal Shutdown Protection
- Short-Circuit Protection
- Small Package Size
Package
MIC5253-1.8BC5 is available in a small SOT-23 package.
Essence
The essence of MIC5253-1.8BC5 is to provide a stable and regulated output voltage of 1.8V from an input voltage range of 2.3V to 5.5V.
Packaging/Quantity
MIC5253-1.8BC5 is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.3V to 5.5V
- Output Voltage: 1.8V
- Output Current: 150mA (maximum)
- Dropout Voltage: 200mV
- Quiescent Current: 40µA (typical)
- Shutdown Current: 0.1µA (typical)
- Operating Temperature Range: -40°C to +125°C
- Package Type: SOT-23
Detailed Pin Configuration
MIC5253-1.8BC5 has three pins:
- VIN: Input voltage pin.
- GND: Ground pin.
- VOUT: Output voltage pin.
Functional Features
- Voltage regulation: MIC5253-1.8BC5 ensures a stable output voltage of 1.8V, regardless of input voltage fluctuations.
- Low quiescent current: The regulator consumes only 40µA of current when in operation, minimizing power consumption.
- Thermal shutdown protection: It includes built-in thermal protection to prevent overheating and damage to the device.
- Short-circuit protection: MIC5253-1.8BC5 has short-circuit protection to safeguard against excessive current flow.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for flexibility in various applications.
- Low quiescent current minimizes power consumption.
- Small package size enables space-saving designs.
- Thermal shutdown and short-circuit protection enhance reliability.
Disadvantages
- Limited maximum output current of 150mA may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect efficiency in low-input voltage scenarios.
Working Principles
MIC5253-1.8BC5 operates based on a linear voltage regulation principle. It uses a feedback mechanism to compare the output voltage with a reference voltage of 1.8V. Any deviation from the desired output voltage is corrected by adjusting the internal circuitry to maintain a stable 1.8V output.
Detailed Application Field Plans
MIC5253-1.8BC5 finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems - Communication modules
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to MIC5253-1.8BC5 are: - LM1117-1.8 - LT1763-1.8 - MCP1702-1.8 - TPS78218
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.
In conclusion, MIC5253-1.8BC5 is a voltage regulator that provides stable 1.8V output voltage with low quiescent current and various protection features. It is commonly used in battery-powered devices, portable electronics, and IoT applications. Alternative models such as LM1117-1.8, LT1763-1.8, MCP1702-1.8, and TPS78218 can also be considered for similar applications.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5253-1.8BC5 in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of MIC5253-1.8BC5 in technical solutions:
Q1: What is MIC5253-1.8BC5? A1: MIC5253-1.8BC5 is a specific model of voltage regulator IC (integrated circuit) manufactured by Microchip Technology. It is designed to provide a regulated output voltage of 1.8V.
Q2: What is the input voltage range for MIC5253-1.8BC5? A2: The input voltage range for MIC5253-1.8BC5 is typically between 2.3V and 16V.
Q3: What is the maximum output current that MIC5253-1.8BC5 can handle? A3: MIC5253-1.8BC5 can handle a maximum output current of 500mA.
Q4: What are the typical applications of MIC5253-1.8BC5? A4: MIC5253-1.8BC5 is commonly used in various technical solutions where a stable and regulated 1.8V power supply is required, such as in microcontrollers, sensors, and other low-power devices.
Q5: Does MIC5253-1.8BC5 require any external components for operation? A5: Yes, MIC5253-1.8BC5 requires a few external components, including input and output capacitors, to ensure stability and proper functioning.
Q6: Can MIC5253-1.8BC5 tolerate overvoltage or reverse polarity? A6: No, MIC5253-1.8BC5 is not designed to tolerate overvoltage or reverse polarity. Adequate protection measures should be taken to prevent such situations.
Q7: Is thermal shutdown protection included in MIC5253-1.8BC5? A7: Yes, MIC5253-1.8BC5 incorporates thermal shutdown protection to prevent overheating and damage under excessive operating conditions.
Q8: What is the typical dropout voltage of MIC5253-1.8BC5? A8: The typical dropout voltage of MIC5253-1.8BC5 is around 200mV at a 500mA load.
Q9: Can MIC5253-1.8BC5 operate in a wide temperature range? A9: Yes, MIC5253-1.8BC5 is designed to operate in a wide temperature range, typically from -40°C to +125°C.
Q10: Is MIC5253-1.8BC5 available in different package options? A10: Yes, MIC5253-1.8BC5 is available in various package options, including SOT-23, SOT-89, and DFN, allowing flexibility in different application scenarios.
Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for MIC5253-1.8BC5.