Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MIC5245-3.3BMM-TR

MIC5245-3.3BMM-TR

Product Overview

Category

The MIC5245-3.3BMM-TR belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize the output voltage.

Characteristics

  • Voltage Output: 3.3V
  • Package Type: BMM
  • Package Quantity: TR
  • Essence: Voltage regulation and stabilization
  • Packaging/Quantity: Tape and Reel (TR)

Specifications

The MIC5245-3.3BMM-TR has the following specifications:

  • Input Voltage Range: 2.3V to 5.5V
  • Output Voltage: 3.3V ±2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 40µA
  • Line Regulation: 0.02%/V
  • Load Regulation: 0.1%/mA
  • Operating Temperature Range: -40°C to +125°C
  • Package Type: SOT-23

Detailed Pin Configuration

The MIC5245-3.3BMM-TR has three pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Excellent line and load regulation
  • Thermal shutdown protection
  • Short-circuit current limit

Advantages and Disadvantages

Advantages

  • Stable and regulated output voltage
  • Wide input voltage range
  • Low power consumption
  • Compact package size
  • Protection features for enhanced reliability

Disadvantages

  • Limited maximum output current (150mA)
  • Dropout voltage may affect efficiency in low input voltage scenarios

Working Principles

The MIC5245-3.3BMM-TR is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The MIC5245-3.3BMM-TR finds applications in various electronic devices, including but not limited to:

  1. Battery-powered devices
  2. Portable electronics
  3. IoT devices
  4. Wearable devices
  5. Embedded systems

Detailed and Complete Alternative Models

Some alternative models to the MIC5245-3.3BMM-TR include:

  1. LM1117-3.3
  2. LT1763-3.3
  3. MCP1703-3.3
  4. TPS79633

These models offer similar functionality and can be used as alternatives depending on specific requirements.

In conclusion, the MIC5245-3.3BMM-TR is a voltage regulator that provides stable and regulated output voltage of 3.3V. It has various advantages such as low power consumption and thermal shutdown protection, but also some limitations like limited maximum output current. This device finds applications in battery-powered devices, portable electronics, IoT devices, wearable devices, and embedded systems. Alternative models such as LM1117-3.3, LT1763-3.3, MCP1703-3.3, and TPS79633 can be considered based on specific needs.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5245-3.3BMM-TR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MIC5245-3.3BMM-TR in technical solutions:

  1. Q: What is the MIC5245-3.3BMM-TR? A: The MIC5245-3.3BMM-TR is a low-dropout (LDO) voltage regulator IC that provides a stable output voltage of 3.3V.

  2. Q: What is the input voltage range for the MIC5245-3.3BMM-TR? A: The input voltage range for the MIC5245-3.3BMM-TR is typically between 2.5V and 16V.

  3. Q: What is the maximum output current of the MIC5245-3.3BMM-TR? A: The MIC5245-3.3BMM-TR can provide a maximum output current of 150mA.

  4. Q: Can the MIC5245-3.3BMM-TR be used in battery-powered applications? A: Yes, the MIC5245-3.3BMM-TR is suitable for battery-powered applications as it has a low quiescent current and operates efficiently with low dropout voltage.

  5. Q: Is the MIC5245-3.3BMM-TR short-circuit protected? A: Yes, the MIC5245-3.3BMM-TR has built-in short-circuit protection to prevent damage to the device in case of a short circuit.

  6. Q: Can the MIC5245-3.3BMM-TR be used in automotive applications? A: Yes, the MIC5245-3.3BMM-TR is designed to meet automotive specifications and can be used in automotive applications.

  7. Q: What is the thermal shutdown feature of the MIC5245-3.3BMM-TR? A: The thermal shutdown feature of the MIC5245-3.3BMM-TR protects the device from overheating by shutting down the regulator when the junction temperature exceeds a certain threshold.

  8. Q: Can the MIC5245-3.3BMM-TR be used in low-power IoT devices? A: Yes, the MIC5245-3.3BMM-TR is suitable for low-power IoT devices as it has a low quiescent current and operates efficiently with low dropout voltage.

  9. Q: Does the MIC5245-3.3BMM-TR require any external components for operation? A: Yes, the MIC5245-3.3BMM-TR requires a few external components such as input and output capacitors for stability and filtering.

  10. Q: Is the MIC5245-3.3BMM-TR available in different package options? A: Yes, the MIC5245-3.3BMM-TR is available in various package options, including SOT-23 and DFN, to suit different application requirements.

Please note that these answers are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.