Zie specificaties voor productdetails.
MIC5236-3.0BMM
Product Overview
Category
MIC5236-3.0BMM belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 16V
- Output Voltage: 3.0V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV
- Low Quiescent Current: 120µA
- Low Shutdown Current: 0.1µA
- Thermal Shutdown Protection
- Short Circuit Protection
Package
MIC5236-3.0BMM is available in a miniature SOT-23 package.
Essence
The essence of MIC5236-3.0BMM lies in its ability to provide a stable output voltage despite variations in input voltage and load conditions.
Packaging/Quantity
This product is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 16V
- Output Voltage: 3.0V
- Output Current: 150mA (maximum)
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 120µA (typical)
- Shutdown Current: 0.1µA (typical)
- Operating Temperature Range: -40°C to +125°C
- Package Type: SOT-23
Detailed Pin Configuration
MIC5236-3.0BMM has three pins:
- VIN (Pin 1): Input voltage pin.
- GND (Pin 2): Ground reference pin.
- VOUT (Pin 3): Output voltage pin.
Functional Features
- Voltage Regulation: MIC5236-3.0BMM ensures a stable output voltage of 3.0V, regardless of input voltage fluctuations.
- Low Quiescent Current: With a low quiescent current of 120µA, it minimizes power consumption in standby or idle modes.
- Thermal Shutdown Protection: The device incorporates thermal shutdown protection to prevent damage due to excessive temperature.
- Short Circuit Protection: MIC5236-3.0BMM includes short circuit protection, safeguarding the circuit from potential damage.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for flexibility in various applications.
- Low quiescent current reduces power consumption.
- Thermal shutdown protection prevents overheating.
- Short circuit protection enhances circuit reliability.
Disadvantages
- Limited maximum output current of 150mA may not be suitable for high-power applications.
- Dropout voltage of 200mV may result in some power loss.
Working Principles
MIC5236-3.0BMM operates based on the principle of linear voltage regulation. It utilizes a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 3.0V. This is achieved by controlling the pass transistor, which regulates the flow of current from the input to the output.
Detailed Application Field Plans
MIC5236-3.0BMM finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Embedded systems - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to MIC5236-3.0BMM are: - LM1117-3.3 - LT1761-3.3 - MCP1703-3.3 - TPS73633
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements and constraints.
Word count: 496 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5236-3.0BMM in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of MIC5236-3.0BMM in technical solutions:
Q: What is MIC5236-3.0BMM? A: MIC5236-3.0BMM is a low-dropout (LDO) voltage regulator IC that provides a fixed output voltage of 3.0V.
Q: What is the input voltage range for MIC5236-3.0BMM? A: The input voltage range for MIC5236-3.0BMM is typically between 2.5V and 16V.
Q: What is the maximum output current of MIC5236-3.0BMM? A: MIC5236-3.0BMM can provide a maximum output current of 150mA.
Q: Can MIC5236-3.0BMM be used in battery-powered applications? A: Yes, MIC5236-3.0BMM is suitable for battery-powered applications as it has a low quiescent current and operates efficiently with low dropout voltage.
Q: Is MIC5236-3.0BMM suitable for noise-sensitive applications? A: Yes, MIC5236-3.0BMM has excellent power supply rejection ratio (PSRR) and is suitable for noise-sensitive applications.
Q: Does MIC5236-3.0BMM have built-in thermal shutdown protection? A: Yes, MIC5236-3.0BMM incorporates thermal shutdown protection to prevent overheating and damage.
Q: Can I use MIC5236-3.0BMM in automotive applications? A: Yes, MIC5236-3.0BMM is designed to meet automotive specifications and can be used in automotive applications.
Q: What is the operating temperature range for MIC5236-3.0BMM? A: MIC5236-3.0BMM has an operating temperature range of -40°C to +125°C.
Q: Does MIC5236-3.0BMM require any external components for operation? A: Yes, MIC5236-3.0BMM requires a few external components such as input and output capacitors for stability and filtering.
Q: Can I use MIC5236-3.0BMM in my low-power microcontroller project? A: Yes, MIC5236-3.0BMM is suitable for powering low-power microcontrollers and other similar projects due to its low quiescent current and efficient operation.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.