Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MIC5219-5.0YM5-TR

MIC5219-5.0YM5-TR

Introduction

The MIC5219-5.0YM5-TR is a voltage regulator belonging to the category of linear regulators. It is commonly used to provide a stable 5V output voltage from a higher input voltage source. This component is known for its high accuracy, low dropout voltage, and low quiescent current, making it suitable for various applications.

Basic Information Overview

  • Category: Linear Regulator
  • Use: Providing stable 5V output voltage
  • Characteristics: High accuracy, low dropout voltage, low quiescent current
  • Package: SOT-23-5
  • Essence: Voltage regulation
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.3V to 20V
  • Output Voltage: 5V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 350mV at 500mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The MIC5219-5.0YM5-TR has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. EN (Enable) 5. VOUT (Output Voltage)

Functional Features

  • Low Dropout Voltage: Allows the regulator to operate with small voltage differentials between the input and output.
  • Low Quiescent Current: Minimizes power consumption when the regulator is in standby mode.
  • Thermal Shutdown Protection: Prevents the device from overheating under excessive load or high ambient temperatures.

Advantages and Disadvantages

Advantages

  • High accuracy and stability
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection

Disadvantages

  • Limited maximum output current (500mA)

Working Principles

The MIC5219-5.0YM5-TR operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant 5V output. When the input voltage exceeds the output voltage by the dropout voltage, the regulator enters dropout mode, where the pass transistor remains fully on to minimize dropout voltage.

Detailed Application Field Plans

The MIC5219-5.0YM5-TR is commonly used in the following applications: - Battery-powered devices - Portable consumer electronics - Embedded systems - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the MIC5219-5.0YM5-TR include: - LM7805: A widely used linear regulator with similar characteristics - LT1763: Low dropout linear regulator with adjustable output voltage - TPS7A47: Ultra-low noise linear regulator for sensitive analog circuits

In conclusion, the MIC5219-5.0YM5-TR is a reliable linear regulator with high accuracy and low dropout voltage, making it suitable for various low-power applications.

Word Count: 443

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5219-5.0YM5-TR in technische oplossingen

  1. What is the MIC5219-5.0YM5-TR?

    • The MIC5219-5.0YM5-TR is a 5.0V low-dropout (LDO) voltage regulator designed for use in various technical solutions.
  2. What is the input voltage range for the MIC5219-5.0YM5-TR?

    • The input voltage range for the MIC5219-5.0YM5-TR is typically between 2.3V and 20V.
  3. What is the maximum output current of the MIC5219-5.0YM5-TR?

    • The MIC5219-5.0YM5-TR can provide a maximum output current of 500mA.
  4. What are the typical applications for the MIC5219-5.0YM5-TR?

    • Typical applications for the MIC5219-5.0YM5-TR include powering microcontrollers, sensors, and other low-power devices in various electronic systems.
  5. What is the dropout voltage of the MIC5219-5.0YM5-TR?

    • The dropout voltage of the MIC5219-5.0YM5-TR is typically around 300mV at full load.
  6. What is the operating temperature range of the MIC5219-5.0YM5-TR?

    • The MIC5219-5.0YM5-TR can operate within a temperature range of -40°C to 125°C.
  7. Does the MIC5219-5.0YM5-TR require any external components for operation?

    • Yes, the MIC5219-5.0YM5-TR requires input and output capacitors for stable operation.
  8. Is the MIC5219-5.0YM5-TR suitable for battery-powered applications?

    • Yes, the low quiescent current and low dropout voltage make the MIC5219-5.0YM5-TR suitable for battery-powered applications.
  9. What are the key features of the MIC5219-5.0YM5-TR?

    • Key features of the MIC5219-5.0YM5-TR include low dropout voltage, low quiescent current, thermal shutdown protection, and current limit protection.
  10. Can the MIC5219-5.0YM5-TR be used in automotive applications?

    • Yes, the MIC5219-5.0YM5-TR is suitable for automotive applications, given its wide input voltage range and robust design.

Feel free to ask if you need further information on any of these questions!