Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MIC5207-2.9YM5-TR
Details bekijken DataSheets

MIC5207-2.9YM5-TR

Introduction

The MIC5207-2.9YM5-TR is a voltage regulator belonging to the category of integrated circuits. It is commonly used in electronic devices to regulate voltage and ensure stable power supply to sensitive components. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MIC5207-2.9YM5-TR.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: Voltage Regulation
  • Characteristics: Stable output voltage, low dropout voltage, thermal shutdown protection
  • Package: SOT-23-5
  • Essence: Regulating voltage for electronic devices
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Output Voltage: 2.9V
  • Input Voltage Range: 2.3V to 10V
  • Dropout Voltage: 250mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The MIC5207-2.9YM5-TR has a standard SOT-23-5 package with the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. BYP (Bypass Capacitor)

Functional Features

  • Low Dropout Voltage: Ensures efficient regulation even when the input voltage is close to the output voltage.
  • Thermal Shutdown Protection: Safeguards the device from overheating by shutting down when the temperature exceeds the specified limit.

Advantages and Disadvantages

Advantages

  • Stable output voltage
  • Low dropout voltage
  • Thermal shutdown protection
  • Small form factor

Disadvantages

  • Limited input voltage range
  • Higher quiescent current compared to some alternatives

Working Principles

The MIC5207-2.9YM5-TR operates by comparing the reference voltage with the feedback voltage to adjust the output voltage. When the input voltage fluctuates, the regulator responds by modulating the pass transistor to maintain a constant output voltage.

Detailed Application Field Plans

The MIC5207-2.9YM5-TR is widely used in various applications, including: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the MIC5207-2.9YM5-TR include: - LM2937-3.3 - LT1763-2.8 - ADP3338AKCZ-2.5-R7 - MAX8887EZK33+

In summary, the MIC5207-2.9YM5-TR is a versatile voltage regulator with a compact form factor and essential features for stabilizing power supply in electronic devices. Its specifications, pin configuration, functional features, and application field plans make it a valuable component in various industries.

Word Count: 470

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5207-2.9YM5-TR in technische oplossingen

  1. What is the MIC5207-2.9YM5-TR?

    • The MIC5207-2.9YM5-TR is a low-dropout (LDO) voltage regulator designed to provide a stable 2.9V output voltage from a higher input voltage.

  2. What is the input voltage range for the MIC5207-2.9YM5-TR?

    • The input voltage range for the MIC5207-2.9YM5-TR is typically between 2.3V and 10V.

  3. What is the maximum output current of the MIC5207-2.9YM5-TR?

    • The MIC5207-2.9YM5-TR can typically supply a maximum output current of 150mA.

  4. What are the typical applications for the MIC5207-2.9YM5-TR?

    • The MIC5207-2.9YM5-TR is commonly used in battery-powered devices, portable equipment, and other applications where a stable 2.9V power supply is required.

  5. What are the key features of the MIC5207-2.9YM5-TR?

    • The key features of the MIC5207-2.9YM5-TR include low dropout voltage, low ground current, thermal shutdown protection, and short-circuit current limiting.

  6. What are the recommended input and output capacitors for the MIC5207-2.9YM5-TR?

    • It is recommended to use a 1μF ceramic capacitor at the input and a 1μF ceramic capacitor at the output for stability and noise reduction.

  7. Can the MIC5207-2.9YM5-TR be used in automotive applications?

    • Yes, the MIC5207-2.9YM5-TR is suitable for automotive applications as it meets the necessary requirements for such environments.

  8. What is the operating temperature range of the MIC5207-2.9YM5-TR?

    • The operating temperature range of the MIC5207-2.9YM5-TR is typically between -40°C and 125°C.

  9. Does the MIC5207-2.9YM5-TR require any external components for operation?

    • Yes, the MIC5207-2.9YM5-TR requires input and output capacitors for stable and reliable operation.

  10. Is the MIC5207-2.9YM5-TR available in a surface-mount package?

    • Yes, the MIC5207-2.9YM5-TR is available in a SOT-23-5 surface-mount package for easy integration into compact designs.