Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MIC5206-3.8YMM
Details bekijken DataSheets

MIC5206-3.8YMM

Product Overview

Category

MIC5206-3.8YMM belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit

Package

MIC5206-3.8YMM comes in a small SOT-23 package.

Essence

The essence of MIC5206-3.8YMM lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 3.8V
  • Dropout Voltage: 120mV at 150mA
  • Quiescent Current: 35µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5206-3.8YMM has three pins:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. VOUT (Pin 3): Regulated output voltage pin.

Functional Features

  • Low dropout voltage ensures efficient regulation even when the input voltage is close to the desired output voltage.
  • High output voltage accuracy provides precise voltage regulation for sensitive electronic components.
  • Low quiescent current minimizes power consumption when the load is light.
  • Thermal shutdown protection prevents damage due to excessive temperature.
  • Short-circuit current limit protects the regulator and connected devices from excessive current flow.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact size
  • Wide input voltage range
  • Low power consumption

Disadvantages

  • Limited output current capacity
  • Higher cost compared to some alternatives

Working Principles

MIC5206-3.8YMM operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains constant, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

MIC5206-3.8YMM finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as substitutes for MIC5206-3.8YMM include: - LM1117-3.3 - LT1761-3.3 - MCP1700-3.3

These alternatives offer similar voltage regulation capabilities and may vary in terms of package type, specifications, and additional features.

In conclusion, MIC5206-3.8YMM is a voltage regulator with excellent characteristics such as low dropout voltage, high output voltage accuracy, and thermal shutdown protection. It finds applications in various electronic devices and has alternative models available in the market.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC5206-3.8YMM in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MIC5206-3.8YMM in technical solutions:

  1. Q: What is MIC5206-3.8YMM? A: MIC5206-3.8YMM is a low dropout (LDO) voltage regulator IC manufactured by Microchip Technology. It provides a fixed output voltage of 3.8V with a maximum output current of 150mA.

  2. Q: What are the typical applications of MIC5206-3.8YMM? A: MIC5206-3.8YMM is commonly used in battery-powered devices, portable electronics, and other low-power applications that require a stable 3.8V power supply.

  3. Q: What is the input voltage range for MIC5206-3.8YMM? A: The input voltage range for MIC5206-3.8YMM is typically between 2.5V and 16V.

  4. Q: How much dropout voltage does MIC5206-3.8YMM have? A: MIC5206-3.8YMM has a typical dropout voltage of 200mV at 150mA load current.

  5. Q: Can MIC5206-3.8YMM handle higher currents? A: No, MIC5206-3.8YMM is designed to handle a maximum output current of 150mA. If higher currents are required, a different LDO or voltage regulator should be considered.

  6. Q: Does MIC5206-3.8YMM have built-in thermal shutdown protection? A: Yes, MIC5206-3.8YMM incorporates thermal shutdown protection to prevent overheating and damage to the device.

  7. Q: Is MIC5206-3.8YMM available in different package options? A: Yes, MIC5206-3.8YMM is available in a variety of package options, including SOT-23 and DFN.

  8. Q: What is the typical quiescent current of MIC5206-3.8YMM? A: The typical quiescent current of MIC5206-3.8YMM is around 75µA.

  9. Q: Can MIC5206-3.8YMM operate in a wide temperature range? A: Yes, MIC5206-3.8YMM is designed to operate in a temperature range of -40°C to +125°C.

  10. Q: Are there any specific input/output capacitor requirements for MIC5206-3.8YMM? A: Yes, it is recommended to use a 1µF ceramic input capacitor and a 1µF ceramic output capacitor for stability and proper operation of MIC5206-3.8YMM.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.