Zie specificaties voor productdetails.
MIC49150BMM
Product Overview
Category
MIC49150BMM belongs to the category of integrated circuits (ICs).
Use
The MIC49150BMM is commonly used as a voltage regulator in various electronic devices.
Characteristics
- Input Voltage Range: 4.5V to 75V
- Output Voltage Range: 1.23V to 60V
- Maximum Output Current: 1.5A
- Low Dropout Voltage: 300mV at 1A
- Adjustable Output Voltage
- Thermal Shutdown Protection
- Short Circuit Protection
Package
MIC49150BMM is available in a miniature 8-pin MSOP package.
Essence
The essence of MIC49150BMM lies in its ability to regulate voltage efficiently and reliably, ensuring stable power supply for electronic devices.
Packaging/Quantity
MIC49150BMM is typically packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Input Voltage Range: 4.5V to 75V
- Output Voltage Range: 1.23V to 60V
- Maximum Output Current: 1.5A
- Dropout Voltage: 300mV at 1A
- Line Regulation: ±0.02% typical
- Load Regulation: ±0.2% typical
- Quiescent Current: 10mA typical
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
MIC49150BMM features an 8-pin MSOP package with the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- FB: Feedback pin for output voltage regulation
- EN: Enable pin for turning the regulator on/off
- VOUT: Output voltage pin
- NC: No connection
- NC: No connection
- VIN: Input voltage pin
Functional Features
- Wide input voltage range allows for versatile applications.
- Adjustable output voltage provides flexibility in meeting specific requirements.
- Low dropout voltage ensures efficient power conversion.
- Thermal shutdown protection prevents overheating and damage.
- Short circuit protection safeguards the regulator and connected devices.
Advantages and Disadvantages
Advantages
- Wide input voltage range enables compatibility with various power sources.
- Adjustable output voltage allows for customization.
- Efficient power conversion with low dropout voltage.
- Protection features enhance reliability and safety.
Disadvantages
- Limited maximum output current of 1.5A may not be suitable for high-power applications.
- The MSOP package may require specialized handling during assembly.
Working Principles
MIC49150BMM operates as a linear voltage regulator. It regulates the output voltage by comparing it to a reference voltage and adjusting the pass transistor accordingly. The feedback pin (FB) is used to monitor the output voltage, while the enable pin (EN) controls the on/off state of the regulator.
Detailed Application Field Plans
MIC49150BMM finds applications in various electronic devices, including but not limited to: - Power supplies - Industrial equipment - Automotive systems - Telecommunications devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to MIC49150BMM include: - LM317 - LT1083 - LM1117 - TPS7A4700
These models can be considered based on specific requirements and compatibility with the application.
Word count: 511 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC49150BMM in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of MIC49150BMM in technical solutions:
Q: What is MIC49150BMM? A: MIC49150BMM is a high-side MOSFET driver IC designed for driving N-channel enhancement-mode MOSFETs in various applications.
Q: What is the maximum voltage rating of MIC49150BMM? A: The maximum voltage rating of MIC49150BMM is typically 80V.
Q: What is the maximum output current capability of MIC49150BMM? A: MIC49150BMM can provide a maximum output current of up to 4A.
Q: Can MIC49150BMM be used with both low-side and high-side MOSFETs? A: Yes, MIC49150BMM can be used with both low-side and high-side MOSFETs depending on the application requirements.
Q: What is the input voltage range of MIC49150BMM? A: The input voltage range of MIC49150BMM is typically between 4.5V and 16V.
Q: Does MIC49150BMM have built-in protection features? A: Yes, MIC49150BMM includes built-in protection features such as thermal shutdown, under-voltage lockout, and over-current protection.
Q: Can MIC49150BMM operate in a wide temperature range? A: Yes, MIC49150BMM is designed to operate in a wide temperature range, typically from -40°C to +125°C.
Q: What is the typical propagation delay of MIC49150BMM? A: The typical propagation delay of MIC49150BMM is around 30ns.
Q: Can MIC49150BMM be used in automotive applications? A: Yes, MIC49150BMM is suitable for automotive applications as it meets the necessary automotive standards and requirements.
Q: What are some typical applications of MIC49150BMM? A: Some typical applications of MIC49150BMM include motor control, power distribution, LED lighting, solenoid drivers, and general-purpose high-side switching.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.