Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MIC2954-08YM-TR

MIC2954-08YM-TR

Introduction

The MIC2954-08YM-TR is a voltage regulator belonging to the category of linear regulators. It is commonly used in electronic circuits to provide a stable and regulated output voltage from an unregulated input voltage source. This device offers several characteristics that make it suitable for a wide range of applications, and it comes in a compact package that enhances its versatility.

Basic Information Overview

  • Category: Linear Regulator
  • Use: Providing stable and regulated output voltage
  • Characteristics: Low dropout voltage, low quiescent current, thermal shutdown protection
  • Package: TO-220, TO-263, SOIC, D2PAK
  • Essence: Voltage regulation
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 3.3V
  • Output Current: 500mA
  • Dropout Voltage: 380mV at 500mA
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The MIC2954-08YM-TR features a standard pin configuration with the following pins: 1. VIN: Input Voltage 2. GND: Ground 3. VOUT: Output Voltage 4. BYPASS: Bypass Capacitor Connection 5. SHDN: Shutdown Control

Functional Features

  • Low Dropout Voltage: Enables operation with small voltage differentials between input and output.
  • Low Quiescent Current: Minimizes power consumption in standby or idle modes.
  • Thermal Shutdown Protection: Safeguards the device from overheating.

Advantages and Disadvantages

Advantages

  • Provides stable output voltage even with varying input voltages
  • Low dropout voltage allows for efficient use of available power
  • Thermal shutdown protection enhances reliability and safety

Disadvantages

  • Limited maximum output current compared to some other regulators
  • Higher quiescent current compared to newer ultra-low-power regulators

Working Principles

The MIC2954-08YM-TR operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage. When the input voltage decreases, the device adjusts the pass element to ensure a consistent output voltage, making it ideal for powering sensitive electronic components.

Detailed Application Field Plans

The MIC2954-08YM-TR finds extensive application in various fields, including: - Consumer Electronics: Powering microcontrollers, sensors, and display modules - Automotive: Voltage regulation in automotive electronics and infotainment systems - Industrial: Control systems, instrumentation, and data acquisition equipment - Telecommunications: Base stations, network equipment, and power management modules

Detailed and Complete Alternative Models

Some alternative models to the MIC2954-08YM-TR include: - LM1117: Similar dropout voltage and output current capabilities - LT1763: Lower quiescent current and wider input voltage range - ADP3338: Higher output current and lower dropout voltage

In conclusion, the MIC2954-08YM-TR is a versatile linear regulator with a range of features that make it suitable for diverse applications across various industries. Its stable output voltage, thermal protection, and compact package make it a popular choice for designers seeking reliable voltage regulation solutions.

Word Count: 455

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC2954-08YM-TR in technische oplossingen

  1. What is the MIC2954-08YM-TR?

    • The MIC2954-08YM-TR is a low-dropout voltage regulator designed to provide a regulated output voltage of 8V with a maximum dropout voltage of 0.6V at 250mA load current.
  2. What are the typical applications of the MIC2954-08YM-TR?

    • The MIC2954-08YM-TR is commonly used in applications such as battery-powered systems, portable instruments, and other devices requiring a regulated 8V power supply.
  3. What is the input voltage range for the MIC2954-08YM-TR?

    • The input voltage range for the MIC2954-08YM-TR is typically 2.5V to 16V.
  4. What is the output voltage accuracy of the MIC2954-08YM-TR?

    • The output voltage accuracy of the MIC2954-08YM-TR is typically ±2%.
  5. What is the maximum output current of the MIC2954-08YM-TR?

    • The MIC2954-08YM-TR can deliver a maximum output current of 250mA.
  6. Does the MIC2954-08YM-TR require an external capacitor for stability?

    • Yes, the MIC2954-08YM-TR requires an external capacitor for stability, typically a 1μF tantalum or aluminum electrolytic capacitor.
  7. Is the MIC2954-08YM-TR available in a surface-mount package?

    • Yes, the MIC2954-08YM-TR is available in a surface-mount TO-220 package.
  8. What is the operating temperature range of the MIC2954-08YM-TR?

    • The operating temperature range of the MIC2954-08YM-TR is typically -40°C to 125°C.
  9. Can the MIC2954-08YM-TR withstand reverse battery connections?

    • Yes, the MIC2954-08YM-TR can withstand reverse battery connections without damage.
  10. Are there any specific layout considerations for using the MIC2954-08YM-TR?

    • It is recommended to keep the input and output traces short and use proper bypass capacitors for optimal performance when using the MIC2954-08YM-TR.