Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MIC2950-06YZ
Details bekijken DataSheets

MIC2950-06YZ

Product Overview

Category

MIC2950-06YZ belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High accuracy
  • Low quiescent current
  • Thermal shutdown protection

Package

MIC2950-06YZ comes in a TO-220 package.

Essence

The essence of MIC2950-06YZ is to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 7V to 26V
  • Output Voltage: 6V
  • Dropout Voltage: 0.5V (maximum)
  • Quiescent Current: 75µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC2950-06YZ has three pins:

  1. Vin (Pin 1): Input voltage pin
  2. GND (Pin 2): Ground pin
  3. Vout (Pin 3): Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output differentials.
  • High accuracy provides precise voltage regulation.
  • Low quiescent current minimizes power consumption when the load is light.
  • Thermal shutdown protection prevents damage due to excessive temperature.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Wide input voltage range
  • Low power consumption
  • Thermal protection

Disadvantages

  • Limited output voltage options
  • Higher cost compared to some alternatives

Working Principles

MIC2950-06YZ utilizes a combination of internal circuitry and feedback mechanisms to maintain a constant output voltage despite variations in input voltage and load conditions. It employs a pass transistor to regulate the output voltage and adjusts its resistance based on feedback signals.

Detailed Application Field Plans

MIC2950-06YZ finds applications in various electronic devices, including but not limited to: - Power supplies - Battery-powered systems - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as substitutes for MIC2950-06YZ are: - LM1117-6.0 - LT1763-6.0 - ADP3336-6.0

These alternatives offer similar voltage regulation capabilities and may have additional features or different package options.

In conclusion, MIC2950-06YZ is a voltage regulator with excellent characteristics such as low dropout voltage, high accuracy, and thermal shutdown protection. It is widely used in various electronic applications and has alternative models available for specific requirements.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC2950-06YZ in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MIC2950-06YZ in technical solutions:

  1. Q: What is MIC2950-06YZ? A: MIC2950-06YZ is a low-dropout voltage regulator (LDO) IC that provides a fixed output voltage of 6V.

  2. Q: What is the input voltage range for MIC2950-06YZ? A: The input voltage range for MIC2950-06YZ is typically between 7V and 26V.

  3. Q: What is the maximum output current of MIC2950-06YZ? A: MIC2950-06YZ can provide a maximum output current of 150mA.

  4. Q: Can MIC2950-06YZ handle higher input voltages than 26V? A: No, exceeding the maximum input voltage of 26V can damage the MIC2950-06YZ. It is recommended to use a voltage within the specified range.

  5. Q: Is MIC2950-06YZ suitable for battery-powered applications? A: Yes, MIC2950-06YZ is commonly used in battery-powered applications due to its low dropout voltage and low quiescent current.

  6. Q: Does MIC2950-06YZ require any external components for operation? A: Yes, MIC2950-06YZ requires an input capacitor and an output capacitor for stability and proper operation. Refer to the datasheet for recommended values.

  7. Q: Can MIC2950-06YZ handle short-circuit conditions? A: Yes, MIC2950-06YZ has built-in protection features that allow it to withstand short-circuit conditions without being damaged.

  8. Q: What is the thermal resistance of MIC2950-06YZ? A: The thermal resistance of MIC2950-06YZ is typically around 50°C/W, which determines its ability to dissipate heat.

  9. Q: Can MIC2950-06YZ be used in automotive applications? A: Yes, MIC2950-06YZ is suitable for automotive applications as it meets the necessary requirements such as temperature range and reliability.

  10. Q: Are there any alternative voltage options available for MIC2950 series regulators? A: Yes, the MIC2950 series includes various voltage options, such as MIC2950-03YZ (3V), MIC2950-05YZ (5V), and so on. Choose the one that suits your specific application requirements.

Please note that these answers are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.