Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MCP1702-4002E/TOVAO

MCP1702-4002E/TOVAO

Product Overview

Category

The MCP1702-4002E/TOVAO belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Low dropout voltage: The MCP1702-4002E/TOVAO has a low dropout voltage, allowing it to operate efficiently even when the input voltage is close to the desired output voltage.
  • High output current capability: This voltage regulator can handle high output currents, making it suitable for various applications.
  • Wide input voltage range: It can accept a wide range of input voltages, providing flexibility in different power supply scenarios.
  • Low quiescent current: The MCP1702-4002E/TOVAO has a low quiescent current, minimizing power consumption during standby or idle modes.
  • Thermal shutdown protection: It incorporates thermal shutdown protection to prevent overheating and ensure safe operation.

Package

The MCP1702-4002E/TOVAO is available in a TO-92 package, which is a widely used through-hole package for discrete components.

Essence

The essence of the MCP1702-4002E/TOVAO lies in its ability to regulate voltage levels with high efficiency and reliability.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.7V to 13.2V
  • Output Voltage: 4.0V
  • Output Current: Up to 250mA
  • Dropout Voltage: 178mV (typical) at 250mA
  • Quiescent Current: 2.0µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP1702-4002E/TOVAO has three pins:

  1. VIN (Pin 1): Input voltage pin
  2. VOUT (Pin 2): Output voltage pin
  3. GND (Pin 3): Ground pin

Functional Features

  • Voltage Regulation: The MCP1702-4002E/TOVAO maintains a stable output voltage of 4.0V, regardless of variations in the input voltage.
  • Load Regulation: It provides excellent load regulation, ensuring that the output voltage remains constant even with varying loads.
  • Short Circuit Protection: This voltage regulator incorporates short circuit protection, safeguarding the circuit from damage in case of a short circuit condition.
  • Reverse Polarity Protection: It offers reverse polarity protection, preventing damage to the device if the input voltage is accidentally connected in reverse.

Advantages and Disadvantages

Advantages

  • High output current capability allows for versatile applications.
  • Wide input voltage range provides flexibility in power supply options.
  • Low dropout voltage ensures efficient operation even with small voltage differentials.
  • Thermal shutdown protection prevents overheating and enhances safety.
  • Compact TO-92 package facilitates easy integration into circuits.

Disadvantages

  • Limited output voltage options restrict its use in certain applications requiring different voltage levels.
  • Relatively low output current compared to some other voltage regulators available in the market.

Working Principles

The MCP1702-4002E/TOVAO operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By maintaining a constant voltage drop across the pass transistor, it ensures a stable output voltage regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

The MCP1702-4002E/TOVAO finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - Embedded systems - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. MCP1702-3302E/TOVAO: Output voltage of 3.3V, otherwise similar specifications.
  2. MCP1702-5002E/TOVAO: Output voltage of 5.0V, otherwise similar specifications.
  3. MCP1702-1802E/TOVAO: Output voltage of 1.8V, otherwise similar specifications.

These alternative models provide different output voltage options while maintaining similar characteristics and functionality as the MCP1702-4002E/TOVAO.

Note: The above information is based on general knowledge and may vary depending on specific manufacturer datasheets and revisions.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MCP1702-4002E/TOVAO in technische oplossingen

  1. What is the maximum input voltage for MCP1702-4002E/TOVAO?
    - The maximum input voltage for MCP1702-4002E/TOVAO is 16V.

  2. What is the typical output current for MCP1702-4002E/TOVAO?
    - The typical output current for MCP1702-4002E/TOVAO is 250mA.

  3. What is the dropout voltage of MCP1702-4002E/TOVAO?
    - The dropout voltage of MCP1702-4002E/TOVAO is typically 178mV at 250mA load.

  4. Can MCP1702-4002E/TOVAO be used in battery-powered applications?
    - Yes, MCP1702-4002E/TOVAO is suitable for battery-powered applications due to its low quiescent current.

  5. Is MCP1702-4002E/TOVAO a low-dropout regulator (LDO)?
    - Yes, MCP1702-4002E/TOVAO is an LDO regulator.

  6. What is the operating temperature range for MCP1702-4002E/TOVAO?
    - The operating temperature range for MCP1702-4002E/TOVAO is -40°C to 125°C.

  7. Can MCP1702-4002E/TOVAO be used in automotive electronics?
    - Yes, MCP1702-4002E/TOVAO is AEC-Q100 qualified and suitable for automotive applications.

  8. Does MCP1702-4002E/TOVAO require external capacitors for stability?
    - No, MCP1702-4002E/TOVAO is stable with no external capacitors required.

  9. What is the package type for MCP1702-4002E/TOVAO?
    - MCP1702-4002E/TOVAO is available in a TO-92 package.

  10. Is MCP1702-4002E/TOVAO suitable for low-power microcontroller applications?
    - Yes, MCP1702-4002E/TOVAO is well-suited for low-power microcontroller and sensor applications due to its low quiescent current and small footprint.