Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MCP1702-3002E/TO

MCP1702-3002E/TO

Product Overview

Category

The MCP1702-3002E/TO belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limiting

Package

The MCP1702-3002E/TO comes in a TO-92 package, which is a widely used through-hole package for small electronic components.

Essence

The essence of the MCP1702-3002E/TO is its ability to provide a stable and regulated output voltage, making it suitable for various applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.7V to 13.2V
  • Output Voltage: 3.0V
  • Dropout Voltage: 178mV (typical) at 250mA load
  • Quiescent Current: 2.0µA (typical)
  • Maximum Output Current: 250mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP1702-3002E/TO has three pins:

  1. Vin (Input): This pin is used to connect the input voltage source.
  2. Vout (Output): This pin provides the regulated output voltage.
  3. GND (Ground): This pin is connected to the ground reference.

Functional Features

  • Low Dropout Voltage: The MCP1702-3002E/TO has a low dropout voltage, allowing it to operate efficiently even when the input voltage is close to the desired output voltage.
  • High Output Voltage Accuracy: This voltage regulator provides a high level of accuracy in maintaining the desired output voltage.
  • Low Quiescent Current: The quiescent current is very low, minimizing power consumption when the load is light or idle.
  • Thermal Shutdown Protection: In case of excessive temperature, the MCP1702-3002E/TO has built-in protection that shuts down the device to prevent damage.
  • Short-Circuit Current Limiting: This feature protects the regulator from excessive current flow during a short circuit.

Advantages and Disadvantages

Advantages

  • Stable and regulated output voltage
  • Low dropout voltage ensures efficient operation
  • High output voltage accuracy for precise applications
  • Low quiescent current minimizes power consumption
  • Thermal shutdown protection prevents damage due to overheating
  • Short-circuit current limiting protects the regulator and connected components

Disadvantages

  • Limited maximum output current (250mA)
  • Restricted input voltage range (2.7V to 13.2V)

Working Principles

The MCP1702-3002E/TO operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By comparing the output voltage with a reference voltage, the regulator adjusts the pass transistor to maintain a stable output voltage despite variations in the input voltage or load conditions.

Detailed Application Field Plans

The MCP1702-3002E/TO finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - Embedded systems - Automotive electronics - Industrial control systems - Communication equipment

Detailed and Complete Alternative Models

  • MCP1702-3302E/TO: Output voltage of 3.3V
  • MCP1702-5002E/TO: Output voltage of 5.0V
  • MCP1702T-3302E/TT: SOT-23 package, output voltage of 3.3V
  • MCP1702T-5002E/TT: SOT-23 package, output voltage of 5.0V
  • MCP1702T-1802E/TT: SOT-23 package, output voltage of 1.8V

These alternative models provide different output voltages and package options to suit specific application requirements.

In conclusion, the MCP1702-3002E/TO is a voltage regulator that offers stable and regulated output voltage with low dropout voltage and high accuracy. It has various features such as low quiescent current, thermal shutdown protection, and short-circuit current limiting. This product finds applications in diverse fields and has alternative models available for different voltage and package requirements.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MCP1702-3002E/TO in technische oplossingen

  1. What is the input voltage range for MCP1702-3002E/TO?
    - The input voltage range for MCP1702-3002E/TO is 2.3V to 6.0V.

  2. What is the output voltage of MCP1702-3002E/TO?
    - The output voltage of MCP1702-3002E/TO is fixed at 3.0V.

  3. What is the maximum output current of MCP1702-3002E/TO?
    - The maximum output current of MCP1702-3002E/TO is 250mA.

  4. Can MCP1702-3002E/TO be used in battery-powered applications?
    - Yes, MCP1702-3002E/TO is suitable for battery-powered applications due to its low quiescent current.

  5. Is MCP1702-3002E/TO a low-dropout regulator (LDO)?
    - Yes, MCP1702-3002E/TO is an LDO regulator.

  6. What is the typical dropout voltage of MCP1702-3002E/TO?
    - The typical dropout voltage of MCP1702-3002E/TO is 178mV at 100mA load.

  7. Does MCP1702-3002E/TO have built-in thermal shutdown protection?
    - Yes, MCP1702-3002E/TO features built-in thermal shutdown protection.

  8. Can MCP1702-3002E/TO operate in automotive applications?
    - Yes, MCP1702-3002E/TO is suitable for automotive applications within its specified operating temperature range.

  9. What is the package type of MCP1702-3002E/TO?
    - MCP1702-3002E/TO is available in a TO-92 package.

  10. Is MCP1702-3002E/TO RoHS compliant?
    - Yes, MCP1702-3002E/TO is RoHS compliant.