Zie specificaties voor productdetails.
MCP111-195I/TO
Product Overview
Category
The MCP111-195I/TO belongs to the category of voltage supervisors.
Use
It is used to monitor the power supply voltage levels and provide a reset signal to the microcontroller or other digital system in the event of a power failure or voltage drop.
Characteristics
- Monitors voltage levels
- Provides reset signal
- Low power consumption
- Wide operating voltage range
Package
The MCP111-195I/TO is available in TO-92 package.
Essence
The essence of MCP111-195I/TO lies in its ability to ensure reliable operation of digital systems by monitoring voltage levels and providing reset signals when necessary.
Packaging/Quantity
It is typically available in reels with a quantity of 1000 units per reel.
Specifications
- Operating Voltage Range: 2.7V to 5.5V
- Reset Threshold Voltage: 4.63V
- Quiescent Current: 5µA
- Power-On Reset Time Delay: 150ms
- Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The MCP111-195I/TO has three pins: 1. VDD (Input voltage) 2. GND (Ground) 3. RESET (Output reset signal)
Functional Features
- Precision monitoring of voltage levels
- Open-drain output for flexibility in interfacing with microcontrollers
- Low power consumption for energy efficiency
Advantages
- Wide operating voltage range allows for versatile applications
- Low quiescent current minimizes power consumption
- Reliable reset signal generation enhances system stability
Disadvantages
- Limited to monitoring single voltage rail
- Requires external components for specific threshold voltages
Working Principles
The MCP111-195I/TO operates by comparing the input voltage with the preset threshold voltage. When the input voltage falls below the threshold, the reset output is activated, signaling the connected digital system to reset.
Detailed Application Field Plans
The MCP111-195I/TO is commonly used in various electronic devices such as: - Microcontroller-based systems - Embedded systems - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models to MCP111-195I/TO include: - MAX809 - ADM811 - TPS3808
In conclusion, the MCP111-195I/TO is a reliable voltage supervisor with precise monitoring capabilities and low power consumption, making it suitable for a wide range of digital systems.
[Word Count: 349]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MCP111-195I/TO in technische oplossingen
What is the operating temperature range of MCP111-195I/TO?
- The operating temperature range of MCP111-195I/TO is -40°C to 125°C.What is the typical input voltage range for MCP111-195I/TO?
- The typical input voltage range for MCP111-195I/TO is 1.6V to 5.5V.Can MCP111-195I/TO be used in battery-powered applications?
- Yes, MCP111-195I/TO can be used in battery-powered applications due to its low quiescent current.What is the output voltage accuracy of MCP111-195I/TO?
- The output voltage accuracy of MCP111-195I/TO is ±1.0%.Is MCP111-195I/TO suitable for automotive applications?
- Yes, MCP111-195I/TO is suitable for automotive applications as it meets AEC-Q100 standards.Does MCP111-195I/TO have built-in overcurrent protection?
- No, MCP111-195I/TO does not have built-in overcurrent protection.What is the typical dropout voltage of MCP111-195I/TO?
- The typical dropout voltage of MCP111-195I/TO is 200mV at 100mA load.Can MCP111-195I/TO be used in industrial control systems?
- Yes, MCP111-195I/TO can be used in industrial control systems due to its wide operating temperature range.What is the package type of MCP111-195I/TO?
- MCP111-195I/TO is available in a SOT-23 package.Is MCP111-195I/TO RoHS compliant?
- Yes, MCP111-195I/TO is RoHS compliant, making it suitable for environmentally sensitive applications.