DSPIC33FJ64MC202-E/SO

Product Overview

Category: Microcontroller
Use: Embedded control applications
Characteristics: High performance, low power consumption
Package: 28-pin SOIC
Essence: Digital Signal Controller
Packaging/Quantity: Tape & Reel, 98 units per reel

Specifications

Operating Voltage: 3.0V - 3.6V
Operating Temperature: -40°C to +125°C
Flash Memory: 64 KB
RAM: 8 KB
I/O Pins: 21
Timers: 4 x 16-bit, 2 x 32-bit
ADC Channels: 10-bit, 16 channels
Communication Interfaces: UART, SPI, I2C, CAN

Detailed Pin Configuration

Pin 1: VDD
Pin 2: VSS
Pin 3: OSC1/CLKI
Pin 4: OSC2/CLKO
...
Pin 28: AN9/RB15

Functional Features

High-performance DSC core
Enhanced on-chip peripherals
Advanced analog features
Flexible and intelligent power management
Comprehensive development support

Advantages and Disadvantages

Advantages

High computational performance
Low power consumption
Rich set of peripherals
Extensive development tools and support

Disadvantages

Limited availability of alternative models
Relatively higher cost compared to some competitors

Working Principles

The DSPIC33FJ64MC202-E/SO operates by executing instructions stored in its flash memory, utilizing its integrated peripherals to interface with external components, and managing power consumption to optimize efficiency.

Detailed Application Field Plans

Industrial automation
Motor control systems
Power management
Consumer electronics
Automotive applications

Detailed and Complete Alternative Models

DSPIC33FJ64MC204-E/SO
DSPIC33FJ64MC206-E/SO
DSPIC33FJ64MC208-E/SO

This comprehensive range of alternative models provides flexibility in selecting the most suitable device for specific application requirements.

This content provides a detailed overview of the DSPIC33FJ64MC202-E/SO, covering its product category, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DSPIC33FJ64MC202-E/SO in technische oplossingen

What is the maximum operating frequency of DSPIC33FJ64MC202-E/SO?
- The maximum operating frequency of DSPIC33FJ64MC202-E/SO is 40 MHz.
What are the key features of DSPIC33FJ64MC202-E/SO?
- DSPIC33FJ64MC202-E/SO features high performance, low power consumption, and a wide range of peripherals for various applications.
Can DSPIC33FJ64MC202-E/SO be used in motor control applications?
- Yes, DSPIC33FJ64MC202-E/SO is well-suited for motor control applications due to its advanced PWM capabilities and motor control peripherals.
What communication interfaces are supported by DSPIC33FJ64MC202-E/SO?
- DSPIC33FJ64MC202-E/SO supports SPI, I2C, UART, and CAN communication interfaces.
Is DSPIC33FJ64MC202-E/SO suitable for digital power supply applications?
- Yes, DSPIC33FJ64MC202-E/SO is suitable for digital power supply applications with its high-resolution PWM and analog-to-digital converter (ADC) features.
What development tools are available for programming DSPIC33FJ64MC202-E/SO?
- Development tools such as MPLAB X IDE and MPLAB XC compilers can be used for programming and debugging DSPIC33FJ64MC202-E/SO.
Does DSPIC33FJ64MC202-E/SO support real-time control applications?
- Yes, DSPIC33FJ64MC202-E/SO is capable of handling real-time control applications with its high-speed ADC and deterministic execution.
What are the recommended operating conditions for DSPIC33FJ64MC202-E/SO?
- The recommended operating voltage range for DSPIC33FJ64MC202-E/SO is 2.5V to 3.6V, and the temperature range is -40°C to 125°C.
Can DSPIC33FJ64MC202-E/SO be used in automotive applications?
- Yes, DSPIC33FJ64MC202-E/SO is suitable for automotive applications with its robust design and AEC-Q100 qualification.
Are there any application notes or reference designs available for DSPIC33FJ64MC202-E/SO?
- Yes, Microchip provides application notes and reference designs to assist in implementing DSPIC33FJ64MC202-E/SO in various technical solutions.