Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
DSPIC33FJ128MC802-I/MM
Details bekijken DataSheets

DSPIC33FJ128MC802-I/MM

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: High-performance, low-power consumption, integrated peripherals
  • Package: 44-pin QFN package
  • Essence: Digital Signal Controller (DSC)
  • Packaging/Quantity: Tray packaging, quantity varies

Specifications

  • Architecture: Modified Harvard architecture
  • CPU Speed: Up to 40 MIPS
  • Program Memory Size: 128 KB Flash
  • Data Memory Size: 16 KB RAM
  • Operating Voltage Range: 2.5V to 3.6V
  • Temperature Range: -40°C to +85°C
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Analog-to-Digital Converter (ADC): 10-bit, up to 16 channels
  • Pulse Width Modulation (PWM): Up to 9 channels
  • Timers: Up to 5 timers

Detailed Pin Configuration

The DSPIC33FJ128MC802-I/MM microcontroller has a total of 44 pins. The pin configuration is as follows:

  • Pins 1-8: Analog input pins (AN0-AN7)
  • Pins 9-12: General-purpose I/O pins (RB0-RB3)
  • Pins 13-20: General-purpose I/O pins (RB4-RB11)
  • Pins 21-28: General-purpose I/O pins (RC0-RC7)
  • Pins 29-36: General-purpose I/O pins (RD0-RD7)
  • Pins 37-40: General-purpose I/O pins (RE0-RE3)
  • Pins 41-44: Power and ground pins (VDD, VSS, AVDD, AVSS)

Functional Features

  • High-performance digital signal processing capabilities
  • Integrated peripherals for enhanced functionality
  • Efficient power management for low-power applications
  • Flexible communication interfaces for connectivity options
  • Extensive analog and digital I/O capabilities
  • Advanced timers and PWM modules for precise control

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Low-power consumption for energy-efficient designs - Integrated peripherals reduce external component count - Wide operating voltage range for versatile applications

Disadvantages: - Limited program memory size compared to some other microcontrollers - Higher cost compared to lower-end microcontrollers - Complex pin configuration may require careful PCB layout

Working Principles

The DSPIC33FJ128MC802-I/MM microcontroller operates based on the modified Harvard architecture. It combines the features of a microcontroller and a digital signal processor (DSP), making it suitable for applications that require both control and signal processing capabilities. The microcontroller executes instructions stored in its program memory, interacts with various peripherals, and processes data to perform desired tasks.

Detailed Application Field Plans

The DSPIC33FJ128MC802-I/MM microcontroller is widely used in various embedded systems and control applications. Some specific application fields include: - Industrial automation - Motor control - Power electronics - Medical devices - Automotive systems - Home automation

Detailed and Complete Alternative Models

  • DSPIC33FJ64MC802-I/MM: Similar features but with reduced program memory size (64 KB Flash)
  • DSPIC33FJ256MC802-I/MM: Similar features but with increased program memory size (256 KB Flash)
  • DSPIC33FJ128GP802-I/MM: Similar features but without integrated peripherals
  • DSPIC33FJ128MC804-I/MM: Similar features but with additional I/O pins

Note: This is not an exhaustive list, and there are several alternative models available from the same or different manufacturers.

Word Count: 446

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DSPIC33FJ128MC802-I/MM in technische oplossingen

  1. What is the maximum operating frequency of DSPIC33FJ128MC802-I/MM?

    • The maximum operating frequency of DSPIC33FJ128MC802-I/MM is 40 MHz.

  2. What are the key features of DSPIC33FJ128MC802-I/MM?

    • DSPIC33FJ128MC802-I/MM features high performance, integrated peripherals, and low power consumption.

  3. Can DSPIC33FJ128MC802-I/MM be used for motor control applications?

    • Yes, DSPIC33FJ128MC802-I/MM is well-suited for motor control applications due to its advanced PWM capabilities.

  4. What communication interfaces are supported by DSPIC33FJ128MC802-I/MM?

    • DSPIC33FJ128MC802-I/MM supports SPI, I2C, UART, and CAN communication interfaces.

  5. Is DSPIC33FJ128MC802-I/MM suitable for digital power supply applications?

    • Yes, DSPIC33FJ128MC802-I/MM is suitable for digital power supply applications with its high-resolution PWM and ADC modules.

  6. What development tools are available for programming DSPIC33FJ128MC802-I/MM?

    • Development tools such as MPLAB X IDE and MPLAB XC compilers can be used for programming DSPIC33FJ128MC802-I/MM.

  7. Does DSPIC33FJ128MC802-I/MM support real-time control applications?

    • Yes, DSPIC33FJ128MC802-I/MM is designed for real-time control applications with its deterministic and low-latency operation.

  8. What are the available memory options in DSPIC33FJ128MC802-I/MM?

    • DSPIC33FJ128MC802-I/MM offers up to 128 KB of flash memory and 16 KB of RAM.

  9. Can DSPIC33FJ128MC802-I/MM operate in harsh industrial environments?

    • Yes, DSPIC33FJ128MC802-I/MM is designed to operate reliably in harsh industrial environments with its robust features.

  10. Are there any application notes or reference designs available for DSPIC33FJ128MC802-I/MM?

    • Yes, Microchip provides a wide range of application notes and reference designs for DSPIC33FJ128MC802-I/MM to assist in various technical solutions.