Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ATTINY44A-MMHR
Details bekijken DataSheets

ATTINY44A-MMHR

Product Overview

The ATTINY44A-MMHR belongs to the category of microcontrollers and is commonly used in various electronic applications. This microcontroller is known for its compact size, low power consumption, and versatile functionality. It comes in a small package and is designed to perform various tasks within embedded systems.

Basic Information

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics: Compact size, low power consumption, versatile functionality
  • Package: 14-pin SOIC
  • Essence: Control and process data within electronic systems
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

The ATTINY44A-MMHR microcontroller features the following specifications: - Flash Memory: 4 KB - SRAM: 256 bytes - EEPROM: 256 bytes - Operating Voltage: 1.8V - 5.5V - Digital I/O Pins: 12 - Analog Input Pins: 8 - Clock Speed: Up to 20 MHz

Detailed Pin Configuration

The detailed pin configuration of the ATTINY44A-MMHR microcontroller is as follows:

| Pin Number | Function | |------------|----------------| | 1 | RESET | | 2 | PB3 (MOSI) | | 3 | PB4 (MISO) | | 4 | PB5 (SCK) | | 5 | VCC | | 6 | GND | | 7 | PA0 (AIN0) | | 8 | PA1 (AIN1) | | 9 | PA2 (AIN2) | | 10 | PA3 (AIN3) | | 11 | PA4 (ADC4/SDA) | | 12 | PA5 (ADC5/SCL) | | 13 | PA6 (ADC6) | | 14 | PA7 (ADC7) |

Functional Features

The ATTINY44A-MMHR microcontroller offers the following functional features: - Low Power Consumption: Ideal for battery-powered applications - Versatile I/O Capabilities: Supports both digital and analog inputs and outputs - Flexible Clock Options: Can operate at different clock speeds to suit specific application requirements - Built-in EEPROM: Allows for non-volatile data storage

Advantages and Disadvantages

Advantages

  • Small form factor
  • Low power consumption
  • Versatile I/O capabilities

Disadvantages

  • Limited memory capacity compared to higher-end microcontrollers
  • Limited number of I/O pins

Working Principles

The ATTINY44A-MMHR operates by executing instructions stored in its flash memory. It interacts with external components through its I/O pins and processes data according to the program loaded into its memory. The microcontroller's clock speed and voltage levels determine its processing capabilities.

Detailed Application Field Plans

The ATTINY44A-MMHR microcontroller is well-suited for a wide range of applications, including: - Home automation systems - Sensor nodes for IoT networks - Battery-powered devices - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the ATTINY44A-MMHR microcontroller include: - ATTINY24A-MMHR: Similar features with reduced memory and I/O capabilities - ATTINY84A-MMHR: Enhanced memory and I/O capabilities for more complex applications - ATMEGA328P-PU: Higher-end microcontroller with greater memory and I/O options

In conclusion, the ATTINY44A-MMHR microcontroller offers a balance of size, power efficiency, and functionality, making it suitable for a wide range of embedded system applications.

Word count: 587

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ATTINY44A-MMHR in technische oplossingen

  1. What is the ATTINY44A-MMHR microcontroller used for?

    • The ATTINY44A-MMHR microcontroller is commonly used in various technical solutions such as embedded systems, IoT devices, and consumer electronics.

  2. What are the key features of the ATTINY44A-MMHR?

    • The ATTINY44A-MMHR features 4KB of flash memory, 256 bytes of EEPROM, 256 bytes of SRAM, 12 general-purpose I/O pins, and a wide operating voltage range.

  3. How can I program the ATTINY44A-MMHR?

    • The ATTINY44A-MMHR can be programmed using various development tools such as Atmel Studio, AVR-GCC, or Arduino IDE with an appropriate programmer or bootloader.

  4. What communication interfaces does the ATTINY44A-MMHR support?

    • The ATTINY44A-MMHR supports SPI, I2C, and UART communication interfaces, making it suitable for interfacing with a wide range of peripheral devices.

  5. Can the ATTINY44A-MMHR be used in low-power applications?

    • Yes, the ATTINY44A-MMHR is designed for low-power applications and features multiple sleep modes to minimize power consumption.

  6. What are the typical operating conditions for the ATTINY44A-MMHR?

    • The ATTINY44A-MMHR operates at a voltage range of 1.8V to 5.5V and at temperatures ranging from -40°C to 85°C, making it suitable for a variety of environments.

  7. Does the ATTINY44A-MMHR have built-in analog-to-digital conversion (ADC) capabilities?

    • Yes, the ATTINY44A-MMHR features an integrated 10-bit ADC with multiple channels, allowing for analog sensor interfacing and data acquisition.

  8. Is the ATTINY44A-MMHR suitable for motor control applications?

    • Yes, the ATTINY44A-MMHR can be used for simple motor control applications, thanks to its pulse-width modulation (PWM) outputs and timer/counters.

  9. Can the ATTINY44A-MMHR be used in automotive applications?

    • The ATTINY44A-MMHR is not specifically designed for automotive applications and may not meet the stringent requirements for automotive-grade components.

  10. Are there any development boards available for prototyping with the ATTINY44A-MMHR?

    • Yes, there are various development boards and kits available that feature the ATTINY44A-MMHR, providing a convenient platform for prototyping and testing applications.