Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ATSAM4LC2BA-MUR
Details bekijken DataSheets

ATSAM4LC2BA-MUR

Product Overview

Category

The ATSAM4LC2BA-MUR belongs to the category of microcontrollers.

Use

It is used for embedded control applications, including industrial automation, consumer electronics, and Internet of Things (IoT) devices.

Characteristics

  • Low-power consumption
  • High-performance ARM Cortex-M4 processor
  • Integrated peripherals for connectivity and control
  • Secure boot and secure firmware update capabilities

Package

The ATSAM4LC2BA-MUR is available in a compact surface-mount package.

Essence

The essence of this product lies in its ability to provide efficient and reliable control in various embedded applications while minimizing power consumption.

Packaging/Quantity

The ATSAM4LC2BA-MUR is typically sold in reels with a specific quantity per reel, as specified by the manufacturer.

Specifications

  • Processor: ARM Cortex-M4
  • Clock Speed: Up to 120 MHz
  • Flash Memory: Up to 256 KB
  • SRAM: Up to 64 KB
  • Operating Voltage: 1.62V to 3.6V
  • I/O Pins: Configurable digital and analog I/O pins
  • Connectivity: USB, UART, SPI, I2C, Ethernet

Detailed Pin Configuration

The detailed pin configuration of the ATSAM4LC2BA-MUR can be found in the official datasheet provided by the manufacturer.

Functional Features

  • Advanced power management for low-power operation
  • Hardware cryptographic acceleration for secure communication
  • Rich set of integrated peripherals for versatile application support
  • Flexible serial communication interfaces for connectivity

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable devices
  • High-performance processor enables rapid data processing
  • Secure boot and firmware update capabilities enhance system security

Disadvantages

  • Limited on-chip memory may require external storage in some applications
  • Higher cost compared to lower-end microcontrollers with similar features

Working Principles

The ATSAM4LC2BA-MUR operates based on the principles of executing program instructions stored in its flash memory, interacting with external peripherals through its I/O interfaces, and managing power consumption to optimize performance and energy efficiency.

Detailed Application Field Plans

The ATSAM4LC2BA-MUR is well-suited for a wide range of applications, including: - Industrial automation systems - Smart home and building automation - Wearable devices and IoT sensors - Consumer electronics such as smart appliances and audio equipment

Detailed and Complete Alternative Models

Some alternative models to the ATSAM4LC2BA-MUR include: - ATSAM4S8BA-AU - STM32L476RG - PIC32MZ2048EFH064

In conclusion, the ATSAM4LC2BA-MUR offers a balance of performance, power efficiency, and security features, making it suitable for diverse embedded control applications.

[Word Count: 411]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ATSAM4LC2BA-MUR in technische oplossingen

  1. What is the ATSAM4LC2BA-MUR microcontroller used for?

    • The ATSAM4LC2BA-MUR microcontroller is commonly used in low-power and cost-sensitive applications such as IoT devices, wearables, and battery-powered systems.

  2. What are the key features of the ATSAM4LC2BA-MUR?

    • The ATSAM4LC2BA-MUR features a Cortex-M4 processor, low power consumption, multiple communication interfaces (SPI, I2C, UART), and advanced analog peripherals.

  3. How can I program the ATSAM4LC2BA-MUR microcontroller?

    • The ATSAM4LC2BA-MUR can be programmed using various development tools such as Atmel Studio, MPLAB X IDE, or other compatible integrated development environments (IDEs).

  4. What are the recommended operating conditions for the ATSAM4LC2BA-MUR?

    • The ATSAM4LC2BA-MUR operates within a wide voltage range (1.62V to 3.6V) and temperature range (-40°C to 85°C), making it suitable for diverse environmental conditions.

  5. Does the ATSAM4LC2BA-MUR support low-power modes?

    • Yes, the ATSAM4LC2BA-MUR offers multiple low-power modes, including sleep, standby, and backup modes, to minimize power consumption and extend battery life.

  6. Can the ATSAM4LC2BA-MUR interface with external sensors and peripherals?

    • Yes, the ATSAM4LC2BA-MUR supports various communication protocols and interfaces, allowing seamless integration with sensors, displays, memory devices, and other peripherals.

  7. What security features does the ATSAM4LC2BA-MUR offer?

    • The ATSAM4LC2BA-MUR provides hardware-based security features such as secure boot, cryptographic accelerators, and tamper detection to enhance system security.

  8. Is the ATSAM4LC2BA-MUR suitable for real-time applications?

    • Yes, the ATSAM4LC2BA-MUR's Cortex-M4 processor and advanced peripherals make it well-suited for real-time control and processing tasks.

  9. Are there any development kits available for the ATSAM4LC2BA-MUR?

    • Yes, there are development kits and evaluation boards available that provide a convenient platform for prototyping and testing applications based on the ATSAM4LC2BA-MUR.

  10. Where can I find technical documentation and support for the ATSAM4LC2BA-MUR?

    • Technical documentation, datasheets, application notes, and support resources for the ATSAM4LC2BA-MUR can be found on the manufacturer's website and through their customer support channels.