Zie specificaties voor productdetails.
ATMEGA128-16AUR
Product Overview
Category
ATMEGA128-16AUR belongs to the category of microcontrollers.
Use
This microcontroller is widely used in various electronic devices and systems for controlling and processing data.
Characteristics
- High-performance 8-bit AVR microcontroller
- Low power consumption
- Large program memory capacity
- Multiple communication interfaces
- Wide operating voltage range
- Enhanced analog capabilities
Package
ATMEGA128-16AUR is available in a TQFP package, which stands for Thin Quad Flat Package. This package provides a compact and surface-mountable form factor.
Essence
The essence of ATMEGA128-16AUR lies in its ability to provide efficient control and processing capabilities in a wide range of applications.
Packaging/Quantity
ATMEGA128-16AUR is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of microcontrollers.
Specifications
- Microcontroller Architecture: AVR
- CPU Speed: 16 MHz
- Flash Memory: 128 KB
- RAM: 4 KB
- EEPROM: 4 KB
- Operating Voltage: 2.7V - 5.5V
- Digital I/O Pins: 53
- Analog Input Channels: 8
- Communication Interfaces: UART, SPI, I2C
- Timers/Counters: 4
- PWM Channels: 6
- ADC Resolution: 10-bit
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The ATMEGA128-16AUR microcontroller has a total of 64 pins. The pin configuration is as follows:
- Port A (PA0-PA7)
- Port B (PB0-PB7)
- Port C (PC0-PC7)
- Port D (PD0-PD7)
- Port E (PE0-PE7)
- Port F (PF0-PF7)
- Port G (PG0-PG5)
Functional Features
1. High Performance
ATMEGA128-16AUR offers high-performance computing capabilities with its 16 MHz CPU speed and efficient instruction set.
2. Low Power Consumption
This microcontroller is designed to minimize power consumption, making it suitable for battery-powered applications.
3. Large Program Memory Capacity
With 128 KB of flash memory, ATMEGA128-16AUR can accommodate complex programs and firmware.
4. Multiple Communication Interfaces
The microcontroller supports UART, SPI, and I2C interfaces, enabling seamless communication with other devices.
5. Enhanced Analog Capabilities
ATMEGA128-16AUR features 8 analog input channels and a 10-bit ADC resolution, allowing precise analog signal processing.
Advantages and Disadvantages
Advantages
- High-performance computing capabilities
- Low power consumption
- Ample program memory capacity
- Versatile communication interfaces
- Enhanced analog capabilities
Disadvantages
- Relatively higher cost compared to some other microcontrollers
- Requires familiarity with AVR architecture for efficient programming
Working Principles
ATMEGA128-16AUR operates based on the AVR architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals and external devices. The microcontroller communicates with other components through its communication interfaces and performs tasks according to the programmed logic.
Detailed Application Field Plans
ATMEGA128-16AUR finds applications in various fields, including but not limited to: - Industrial automation - Consumer electronics - Automotive systems - Medical devices - Robotics - Internet of Things (IoT) devices
Detailed and Complete Alternative Models
Some alternative models to ATMEGA128-16AUR that offer similar functionalities are: - ATMEGA2560-16AU - ATMEGA328P-PU - PIC18F4550 - STM32F407VG
These microcontrollers provide comparable features and can be considered as alternatives based on specific project requirements.
In conclusion, ATMEGA128-16AUR is a high-performance microcontroller with versatile features and wide application possibilities. Its efficient computing capabilities, low power consumption, and ample memory capacity make it suitable for various electronic systems and devices.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ATMEGA128-16AUR in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of ATMEGA128-16AUR in technical solutions:
Q: What is the ATMEGA128-16AUR microcontroller used for? A: The ATMEGA128-16AUR is a versatile microcontroller commonly used in various technical solutions, including robotics, industrial automation, and embedded systems.
Q: What is the operating voltage range of the ATMEGA128-16AUR? A: The ATMEGA128-16AUR operates within a voltage range of 2.7V to 5.5V.
Q: How many I/O pins does the ATMEGA128-16AUR have? A: The ATMEGA128-16AUR has a total of 86 I/O pins, which can be configured as inputs or outputs.
Q: What is the maximum clock frequency supported by the ATMEGA128-16AUR? A: The ATMEGA128-16AUR can operate at a maximum clock frequency of 16 MHz.
Q: Can the ATMEGA128-16AUR communicate with other devices? A: Yes, the ATMEGA128-16AUR supports various communication protocols such as UART, SPI, and I2C, allowing it to communicate with other devices like sensors, displays, and modules.
Q: Does the ATMEGA128-16AUR have built-in analog-to-digital converters (ADC)? A: Yes, the ATMEGA128-16AUR has 8 built-in 10-bit ADC channels, allowing it to convert analog signals into digital values.
Q: Can the ATMEGA128-16AUR be programmed using the Arduino IDE? A: Yes, the ATMEGA128-16AUR can be programmed using the Arduino IDE by selecting the appropriate board and programmer settings.
Q: What programming languages can be used to program the ATMEGA128-16AUR? A: The ATMEGA128-16AUR can be programmed using C/C++ language with the help of development tools like Atmel Studio or Arduino IDE.
Q: Is it possible to expand the memory of the ATMEGA128-16AUR? A: Yes, the ATMEGA128-16AUR supports external memory expansion through its external memory interface (EMI).
Q: Can the ATMEGA128-16AUR be powered by a battery? A: Yes, the ATMEGA128-16AUR can be powered by a battery as long as the voltage is within the specified operating range (2.7V to 5.5V).