Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT93C66A-10PI-2.7
Details bekijken DataSheets

AT93C66A-10PI-2.7

Product Overview

Category

AT93C66A-10PI-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for non-volatile storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The data stored in AT93C66A-10PI-2.7 remains even when power is removed.
  • Electrically erasable: The memory can be erased and reprogrammed electronically.
  • High density: AT93C66A-10PI-2.7 offers a large storage capacity.
  • Low power consumption: This chip operates efficiently with minimal power requirements.

Package

AT93C66A-10PI-2.7 is available in a standard 8-pin DIP (Dual Inline Package) format.

Essence

The essence of AT93C66A-10PI-2.7 lies in its ability to provide reliable and non-volatile storage for electronic devices, ensuring data integrity even during power interruptions or system failures.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Operating voltage: 2.7V to 5.5V
  • Memory size: 4Kbits (512 x 8 bits)
  • Organization: 256 bytes x 16 pages
  • Write cycle time: 5ms (maximum)
  • Data retention: 100 years (minimum)

Detailed Pin Configuration

  1. Chip Enable (CE): Enables the chip for read/write operations.
  2. Output Enable (OE): Controls the output buffer.
  3. Write Enable (WE): Enables write operations.
  4. Serial Data Input (DI): Receives data during write operations.
  5. Serial Data Output (DO): Outputs data during read operations.
  6. Clock (CLK): Provides timing for data transfer.
  7. VCC: Power supply voltage.
  8. Ground (GND): Common ground reference.

Functional Features

  • Sequential read and write operations
  • Software and hardware protection mechanisms
  • Self-timed programming cycle
  • Automatic erase-before-write capability
  • Fast data transfer rate

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data integrity.
  • High-density memory allows for ample storage capacity.
  • Low power consumption prolongs battery life.
  • Versatile application in various electronic devices.

Disadvantages

  • Limited write endurance compared to other memory technologies.
  • Relatively slower write cycle time.
  • Higher cost compared to some alternative memory solutions.

Working Principles

AT93C66A-10PI-2.7 utilizes a combination of electrically erasable and programmable memory cells to store and retrieve data. The chip operates by receiving commands and data through the serial interface, which is controlled by the clock signal. The data can be written or read sequentially, and various protection mechanisms ensure data integrity and prevent accidental modifications.

Detailed Application Field Plans

AT93C66A-10PI-2.7 finds applications in a wide range of electronic devices, including: - Microcontrollers - Computers and servers - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  1. AT93C46A-10PU-2.7: Similar to AT93C66A-10PI-2.7 but with a smaller memory size (2Kbits).
  2. AT93C86A-10SI-2.7: Offers a larger memory size (16Kbits) compared to AT93C66A-10PI-2.7.
  3. AT25C256-10PU-2.7: Provides a higher density memory (32Kbits) with extended temperature range.

These alternative models offer different memory sizes and features to cater to specific application requirements.

Word count: 511 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT93C66A-10PI-2.7 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT93C66A-10PI-2.7 in technical solutions:

  1. Q: What is the AT93C66A-10PI-2.7? A: The AT93C66A-10PI-2.7 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a capacity of 4K bits.

  2. Q: What is the operating voltage range for this chip? A: The AT93C66A-10PI-2.7 operates within a voltage range of 2.7V to 5.5V.

  3. Q: How is data communication established with the AT93C66A-10PI-2.7? A: Data communication with the chip is done through a simple 3-wire serial interface, consisting of a clock line, a data input line, and a data output line.

  4. Q: What is the maximum clock frequency supported by this chip? A: The AT93C66A-10PI-2.7 supports a maximum clock frequency of 5 MHz.

  5. Q: Can I write data to the AT93C66A-10PI-2.7? A: Yes, the chip supports both read and write operations. You can write data to specific memory locations using appropriate commands.

  6. Q: Is the data stored in the AT93C66A-10PI-2.7 non-volatile? A: Yes, the data stored in the chip is non-volatile, meaning it remains even when power is removed.

  7. Q: What is the typical endurance of this EEPROM chip? A: The AT93C66A-10PI-2.7 has a typical endurance of 1 million write cycles.

  8. Q: Can I erase the entire chip at once? A: No, the AT93C66A-10PI-2.7 does not support bulk erasure. You can only erase and write data to individual memory locations.

  9. Q: What is the typical data retention period for this chip? A: The AT93C66A-10PI-2.7 has a typical data retention period of 10 years.

  10. Q: Are there any specific precautions to consider when using this chip? A: It is important to ensure proper power supply decoupling and signal integrity to avoid data corruption. Additionally, following the recommended operating conditions and timing specifications is crucial for reliable operation.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the datasheet and documentation provided by the manufacturer for accurate information.