Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT91SAM7X256C-CU
Details bekijken DataSheets

AT91SAM7X256C-CU

Introduction

The AT91SAM7X256C-CU is a microcontroller belonging to the AT91SAM7X series, which is designed for embedded applications. This entry provides an overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded applications
  • Characteristics: High-performance, low-power consumption, extensive peripheral set
  • Package: 64-lead LQFP
  • Essence: ARM7TDMI-S core
  • Packaging/Quantity: Tape & Reel (TR) packaging, 250 units per reel

Specifications

  • Processor: ARM7TDMI-S
  • CPU Speed: Up to 55 MHz
  • Flash Memory: 256 KB
  • SRAM: 64 KB
  • Operating Voltage: 1.65V to 3.6V
  • I/Os: 55
  • Communication Interfaces: USART, SPI, TWI, USB
  • Timers/Counters: 3 x 16-bit, 1 x 8-channel 10-bit ADC

Detailed Pin Configuration

The AT91SAM7X256C-CU features a 64-lead LQFP package with detailed pin configurations for power supply, I/O ports, communication interfaces, and other peripherals. Refer to the datasheet for the complete pinout details.

Functional Features

  • High-Performance CPU: The ARM7TDMI-S core provides efficient processing capabilities.
  • Extensive Peripheral Set: Multiple communication interfaces and timers/counters for versatile connectivity and control.
  • Low-Power Consumption: Optimized power management for energy-efficient operation.

Advantages and Disadvantages

Advantages

  • High processing speed
  • Extensive peripheral support
  • Low-power consumption

Disadvantages

  • Limited on-chip memory
  • Relatively complex programming model

Working Principles

The AT91SAM7X256C-CU operates based on the ARM7TDMI-S core architecture, utilizing its processing capabilities and peripheral support to execute embedded applications. It follows the standard microcontroller operation principles, including fetching instructions, executing operations, and managing input/output operations.

Detailed Application Field Plans

The AT91SAM7X256C-CU is suitable for a wide range of embedded applications, including but not limited to: - Industrial automation - Consumer electronics - Automotive systems - Medical devices - Communication equipment

Detailed and Complete Alternative Models

  • AT91SAM7X128C-CU: Similar features with reduced memory capacity
  • AT91SAM7X512C-CU: Enhanced memory capacity and additional features
  • AT91SAM7X256B-AU: Alternate package option with similar specifications

In conclusion, the AT91SAM7X256C-CU microcontroller offers high performance, extensive peripheral support, and low-power consumption, making it suitable for various embedded applications. Its specifications, functional features, and application field plans demonstrate its versatility in diverse industries.

Word count: 443

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT91SAM7X256C-CU in technische oplossingen

  1. What is the AT91SAM7X256C-CU microcontroller used for?

    • The AT91SAM7X256C-CU microcontroller is commonly used in embedded systems for various applications such as industrial automation, consumer electronics, and automotive control systems.

  2. What are the key features of the AT91SAM7X256C-CU?

    • The key features of the AT91SAM7X256C-CU include a 32-bit ARM7TDMI® RISC processor, 256KB of flash memory, 64KB of SRAM, multiple communication interfaces (UART, SPI, I2C), and a variety of peripheral functions.

  3. How can I program the AT91SAM7X256C-CU microcontroller?

    • The AT91SAM7X256C-CU can be programmed using various development tools such as Atmel Studio, Keil µVision, or other third-party IDEs that support ARM-based microcontrollers.

  4. What are the power requirements for the AT91SAM7X256C-CU?

    • The AT91SAM7X256C-CU typically operates at a voltage range of 1.65V to 3.6V, making it suitable for low-power applications. It also offers multiple power-saving modes to optimize energy consumption.

  5. Can the AT91SAM7X256C-CU communicate with external devices?

    • Yes, the microcontroller supports various communication interfaces such as UART, SPI, and I2C, allowing it to communicate with external sensors, displays, and other peripherals.

  6. What kind of real-time operating system (RTOS) can be used with the AT91SAM7X256C-CU?

    • The AT91SAM7X256C-CU is compatible with popular RTOS options such as FreeRTOS, uC/OS-II, and embOS, providing developers with flexibility in designing real-time embedded systems.

  7. Does the AT91SAM7X256C-CU have built-in security features?

    • Yes, the microcontroller includes hardware security features such as a unique ID and a memory protection unit (MPU) to enhance system security and protect sensitive data.

  8. Is the AT91SAM7X256C-CU suitable for industrial control applications?

    • Absolutely, the microcontroller's robust feature set, including its high-speed GPIO, ADC, and communication interfaces, makes it well-suited for industrial control and monitoring systems.

  9. Can the AT91SAM7X256C-CU be used in automotive applications?

    • Yes, the microcontroller's reliability, low-power operation, and extensive peripheral support make it a viable choice for automotive control systems, including engine management and dashboard displays.

  10. What development boards or evaluation kits are available for the AT91SAM7X256C-CU?

    • Atmel provides evaluation kits such as the AT91SAM7X-EK and AT91SAM7X-EKES, which offer a convenient platform for prototyping and testing applications based on the AT91SAM7X256C-CU microcontroller.