Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT49F001-70TI

AT49F001-70TI

Product Overview

Category

AT49F001-70TI belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: Retains data even when power is turned off.
  • High storage capacity: Can store up to 1 megabit (128 kilobytes) of data.
  • Fast access time: Provides quick read and write operations.
  • Low power consumption: Optimized for energy efficiency.
  • Reliable: Offers high endurance and data retention capabilities.

Package

AT49F001-70TI is available in a compact Thin Small Outline Package (TSOP).

Essence

The essence of AT49F001-70TI lies in its ability to provide reliable and non-volatile storage for electronic systems, ensuring data integrity and accessibility.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each containing a specific quantity of AT49F001-70TI chips. The exact quantity may vary depending on the supplier and customer requirements.

Specifications

  • Memory Type: Flash EEPROM
  • Organization: 128K x 8 bits
  • Supply Voltage: 4.5V - 5.5V
  • Access Time: 70 nanoseconds
  • Operating Temperature Range: -40°C to +85°C
  • Erase/Write Cycle Endurance: 10,000 cycles
  • Data Retention: 20 years

Detailed Pin Configuration

The AT49F001-70TI has a total of 32 pins, which are assigned specific functions as follows:

  1. A16 - Address Input
  2. A15 - Address Input
  3. A12 - Address Input
  4. A7 - Address Input
  5. A6 - Address Input
  6. A5 - Address Input
  7. A4 - Address Input
  8. A3 - Address Input
  9. A2 - Address Input
  10. A1 - Address Input
  11. A0 - Address Input
  12. VCC - Power Supply
  13. OE# - Output Enable
  14. CE# - Chip Enable
  15. WE# - Write Enable
  16. I/O0 - Data Input/Output
  17. I/O1 - Data Input/Output
  18. I/O2 - Data Input/Output
  19. I/O3 - Data Input/Output
  20. I/O4 - Data Input/Output
  21. I/O5 - Data Input/Output
  22. I/O6 - Data Input/Output
  23. I/O7 - Data Input/Output
  24. RY/BY# - Ready/Busy Output
  25. RESET# - Reset Input
  26. NC - No Connection
  27. GND - Ground
  28. A14 - Address Input
  29. A13 - Address Input
  30. A8 - Address Input
  31. A9 - Address Input
  32. A11 - Address Input

Functional Features

  • Easy integration: Compatible with standard microcontrollers and digital systems.
  • Versatile interface: Supports both parallel and serial communication protocols.
  • Sector erase capability: Allows selective erasure of specific memory sectors.
  • Block lock protection: Provides write protection for selected blocks of memory.
  • Software and hardware data protection mechanisms: Ensures data integrity and security.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Retains data even during power loss or system shutdown.
  • High storage capacity: Offers ample space for storing large amounts of data.
  • Fast access time: Enables quick read and write operations.
  • Low power consumption: Optimized for energy-efficient operation.
  • Reliable and durable: Provides high endurance and data retention capabilities.

Disadvantages

  • Limited erase/write cycles: The memory has a finite number of erase/write cycles before it may become unreliable.
  • Relatively higher cost compared to other non-volatile memory options.
  • Requires careful handling to prevent electrostatic discharge (ESD) damage.

Working Principles

AT49F001-70TI utilizes flash EEPROM technology for data storage. It consists of a grid of memory cells, each capable of storing a single bit of information. These cells are organized into sectors and blocks, allowing for efficient read, write, and erase operations. The memory can be accessed using standard address and data lines, enabling seamless integration with various electronic systems.

Detailed Application Field Plans

AT49F001-70TI finds applications in a wide range of electronic devices and systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AT49F001-70TI include: - AT49BV001T: A compatible variant

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT49F001-70TI in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT49F001-70TI in technical solutions:

  1. Q: What is the AT49F001-70TI? A: The AT49F001-70TI is a 1-megabit (128K x 8) CMOS flash memory chip manufactured by Atmel.

  2. Q: What are the key features of the AT49F001-70TI? A: The key features include a 70ns access time, low power consumption, byte-wide data access, and compatibility with various microcontrollers.

  3. Q: How can I interface the AT49F001-70TI with a microcontroller? A: The AT49F001-70TI uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.

  4. Q: Can I use the AT49F001-70TI as a program memory for my microcontroller? A: Yes, the AT49F001-70TI can be used as a program memory for microcontrollers that support external memory interfacing.

  5. Q: What voltage levels does the AT49F001-70TI support? A: The AT49F001-70TI supports a single power supply voltage range of 4.5V to 5.5V.

  6. Q: Is the AT49F001-70TI suitable for high-speed applications? A: Yes, the AT49F001-70TI has a fast access time of 70ns, making it suitable for high-speed applications.

  7. Q: Can I erase and reprogram the AT49F001-70TI multiple times? A: Yes, the AT49F001-70TI supports in-system programming and can be erased and reprogrammed multiple times.

  8. Q: What is the endurance of the AT49F001-70TI? A: The AT49F001-70TI has a minimum endurance of 10,000 erase/write cycles.

  9. Q: Can I use the AT49F001-70TI in automotive applications? A: Yes, the AT49F001-70TI is designed to meet automotive industry requirements and can be used in automotive applications.

  10. Q: Where can I find more information about the AT49F001-70TI? A: You can refer to the datasheet provided by Atmel or visit their official website for detailed information about the AT49F001-70TI.

Please note that these answers are general and may vary depending on specific application requirements.