Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT34C02-10TC-2.7

AT34C02-10TC-2.7

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile Memory
  • Characteristics: Low-power, I2C-Compatible, 2-Wire Serial EEPROM
  • Package: 8-Lead TDFN (Thin Dual Flat No-Lead) Package
  • Essence: Electrically Erasable Programmable Read-Only Memory (EEPROM)
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The AT34C02-10TC-2.7 is a 2-wire serial EEPROM IC with a storage capacity of 2 kilobits (256 bytes). It operates at a voltage range of 1.7V to 5.5V and has a maximum clock frequency of 400 kHz. The device offers byte and page write modes, as well as sequential read operations. It features a write protect pin for hardware data protection.

Detailed Pin Configuration

The AT34C02-10TC-2.7 has an 8-lead TDFN package with the following pin configuration:

  1. A0: Chip Address Input
  2. A1: Chip Address Input
  3. A2: Chip Address Input
  4. VCC: Power Supply Voltage
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect Input
  8. GND: Ground

Functional Features

  • Low-power CMOS technology for reduced power consumption
  • I2C-compatible interface for easy integration into various systems
  • Byte and page write modes for flexible data storage
  • Sequential read operation for efficient data retrieval
  • Write protect pin for hardware data protection

Advantages and Disadvantages

Advantages: - Low power consumption makes it suitable for battery-powered devices - I2C compatibility allows for easy interfacing with other devices - Flexible data storage options with byte and page write modes - Sequential read operation enables efficient data retrieval

Disadvantages: - Limited storage capacity of 2 kilobits (256 bytes) - Relatively slower clock frequency compared to some other EEPROMs - Lack of additional security features like password protection

Working Principles

The AT34C02-10TC-2.7 is based on Electrically Erasable Programmable Read-Only Memory (EEPROM) technology. It utilizes a floating gate structure that allows for non-volatile data storage. The device operates using the I2C protocol, which enables communication between the IC and the host system. Data can be written to and read from the memory cells using the serial data (SDA) and serial clock (SCL) lines.

Detailed Application Field Plans

The AT34C02-10TC-2.7 is commonly used in various electronic systems that require non-volatile memory for storing small amounts of data. Some potential application fields include: - Consumer electronics: Used for storing configuration settings, user preferences, and calibration data in devices such as TVs, set-top boxes, and audio equipment. - Industrial automation: Employed in control systems, sensors, and data loggers to store critical information, such as calibration values, production data, and system parameters. - Automotive: Utilized in vehicle electronics for storing vehicle identification numbers (VIN), mileage data, and other essential information. - Medical devices: Integrated into medical equipment for storing patient data, device configurations, and firmware updates.

Detailed and Complete Alternative Models

  1. AT24C02: Similar 2-wire serial EEPROM IC with a storage capacity of 2 kilobits. Operates at a voltage range of 1.8V to 5.5V.
  2. CAT24C02: I2C-compatible EEPROM IC with a storage capacity of 2 kilobits. Offers a wide voltage range of 1.7V to 5.5V and faster clock frequency.
  3. ST24C02: Electrically erasable serial EEPROM IC with a storage capacity of 2 kilobits. Operates at a voltage range of 2.5V to 5.5V and features a write protect pin.

(Note: The above alternative models are provided for reference purposes and may have different specifications and pin configurations. It is recommended to consult the respective datasheets for detailed information.)

In conclusion, the AT34C02-10TC-2.7 is a low-power, I2C-compatible, 2-wire serial EEPROM IC that offers flexible data storage options and efficient data retrieval. With its compact package and non-volatile memory capabilities, it finds applications in various electronic systems across different industries.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT34C02-10TC-2.7 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT34C02-10TC-2.7 in technical solutions:

  1. Q: What is AT34C02-10TC-2.7? A: AT34C02-10TC-2.7 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by a company called Atmel.

  2. Q: What is the capacity of AT34C02-10TC-2.7? A: The AT34C02-10TC-2.7 has a capacity of 2 kilobits, which is equivalent to 256 bytes or 2048 bits.

  3. Q: What is the operating voltage range for AT34C02-10TC-2.7? A: The AT34C02-10TC-2.7 operates within a voltage range of 2.7V to 5.5V.

  4. Q: What is the maximum clock frequency supported by AT34C02-10TC-2.7? A: The maximum clock frequency supported by AT34C02-10TC-2.7 is 400 kHz.

  5. Q: Can AT34C02-10TC-2.7 be used in automotive applications? A: Yes, AT34C02-10TC-2.7 is suitable for automotive applications as it can withstand high temperatures and has an extended temperature range.

  6. Q: How many write cycles can AT34C02-10TC-2.7 endure? A: AT34C02-10TC-2.7 can endure up to 1 million write cycles.

  7. Q: Does AT34C02-10TC-2.7 support sequential read operation? A: Yes, AT34C02-10TC-2.7 supports sequential read operation, allowing for efficient data retrieval.

  8. Q: Can AT34C02-10TC-2.7 be used in low-power applications? A: Yes, AT34C02-10TC-2.7 is designed to operate with low power consumption, making it suitable for battery-powered devices.

  9. Q: What is the typical standby current of AT34C02-10TC-2.7? A: The typical standby current of AT34C02-10TC-2.7 is 1 µA (microampere).

  10. Q: Is AT34C02-10TC-2.7 compatible with I2C communication protocol? A: Yes, AT34C02-10TC-2.7 is fully compatible with the I2C (Inter-Integrated Circuit) communication protocol, which is widely used in many electronic systems.

Please note that these answers are based on general information about AT34C02-10TC-2.7 and may vary depending on specific application requirements.