AT28HC64BF-12TU belongs to the category of non-volatile memory integrated circuits.
This product is primarily used for data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
The AT28HC64BF-12TU is available in a small outline package (SOP) format.
The essence of this product lies in its ability to provide reliable and high-capacity non-volatile memory storage for electronic devices.
The AT28HC64BF-12TU is typically packaged in reels or tubes, with each containing a specific quantity of chips. The exact packaging and quantity may vary depending on the supplier.
The AT28HC64BF-12TU has a total of 28 pins. The pin configuration is as follows:
The AT28HC64BF-12TU is based on Electrically Erasable Programmable Read-Only Memory (EEPROM) technology. It utilizes a grid of memory cells that can be electrically programmed and erased. The data is stored in these cells by applying specific voltage levels to the control pins.
During operation, the chip enable (CE) pin activates the memory chip, allowing access to the stored data. The output enable (OE) pin controls the output buffers, enabling or disabling the data output. The write enable (WE) pin enables the write operation, ensuring that data can be written to the memory cells.
The AT28HC64BF-12TU finds applications in various electronic devices and systems, including but not limited to: - Microcontrollers - Computers - Consumer electronics - Industrial automation - Automotive electronics - Medical devices
Its high capacity, fast operation speed, and reliability make it suitable for storing program code, configuration data, and other critical information in these applications.
There are several alternative models available in the market that offer similar functionality to the AT28HC64BF-12TU. Some notable alternatives include: - AT28C64B - AT28HC256 - AT28C256 - AT28HC16
These alternative
Sure! Here are 10 common questions and answers related to the application of AT28HC64BF-12TU in technical solutions:
Q: What is the AT28HC64BF-12TU? A: The AT28HC64BF-12TU is a high-speed, low-power CMOS 64K (8K x 8) EEPROM memory chip.
Q: What are the key features of the AT28HC64BF-12TU? A: Some key features include a 12 ns access time, wide voltage range (2.7V to 5.5V), and a 64K-bit capacity.
Q: What applications can the AT28HC64BF-12TU be used for? A: It can be used in various applications such as microcontroller systems, industrial control systems, automotive electronics, and more.
Q: How does the AT28HC64BF-12TU connect to a microcontroller? A: The AT28HC64BF-12TU connects to a microcontroller using a standard parallel interface with address, data, and control lines.
Q: Can the AT28HC64BF-12TU be used in battery-powered devices? A: Yes, the AT28HC64BF-12TU has a low-power design and can operate within a wide voltage range, making it suitable for battery-powered devices.
Q: What is the maximum operating frequency of the AT28HC64BF-12TU? A: The AT28HC64BF-12TU can operate at a maximum frequency of 83 MHz.
Q: Does the AT28HC64BF-12TU support multiple read and write cycles? A: Yes, the AT28HC64BF-12TU supports unlimited read cycles and up to 10,000 write cycles.
Q: Can the AT28HC64BF-12TU retain data without power? A: Yes, the AT28HC64BF-12TU has non-volatile memory, meaning it can retain data even when power is removed.
Q: What is the temperature range for operating the AT28HC64BF-12TU? A: The AT28HC64BF-12TU can operate within a temperature range of -40°C to +85°C.
Q: Are there any specific programming requirements for the AT28HC64BF-12TU? A: Yes, the AT28HC64BF-12TU requires a specific programming algorithm and voltage levels for proper programming and erasing operations.
Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and technical documentation for accurate information.