Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT28HC256F-70SI

AT28HC256F-70SI

Product Overview

Category

AT28HC256F-70SI belongs to the category of high-speed, low-power Electrically Erasable Programmable Read-Only Memory (EEPROM) chips.

Use

This product is primarily used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.

Characteristics

  • High-speed operation
  • Low power consumption
  • Non-volatile memory
  • Large storage capacity
  • Reliable data retention
  • Easy to program and erase

Package

AT28HC256F-70SI comes in a Small-Outline Integrated Circuit (SOIC) package. The package provides protection and facilitates easy integration into electronic circuits.

Essence

The essence of AT28HC256F-70SI lies in its ability to store and retrieve data reliably, while offering high-speed operation and low power consumption.

Packaging/Quantity

AT28HC256F-70SI is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Memory Size: 256 kilobits (32 kilobytes)
  • Organization: 32K x 8 bits
  • Operating Voltage: 2.7V - 5.5V
  • Access Time: 70 nanoseconds
  • Interface: Serial Peripheral Interface (SPI)
  • Data Retention: 10 years
  • Endurance: 100,000 write cycles

Detailed Pin Configuration

  1. Chip Enable (CE)
  2. Output Enable (OE)
  3. Write Enable (WE)
  4. Serial Data Input (SI)
  5. Serial Data Output (SO)
  6. Serial Clock (SCK)
  7. Supply Voltage (VCC)
  8. Ground (GND)

Functional Features

  • High-speed data transfer using the SPI interface
  • Flexible write and erase operations
  • Hardware and software protection mechanisms
  • Low power consumption during standby mode
  • Automatic page write and sector erase functions

Advantages

  • Fast access time allows for efficient data retrieval
  • Low power consumption prolongs battery life in portable devices
  • Large storage capacity accommodates a wide range of applications
  • Reliable data retention ensures long-term data integrity
  • Easy integration into existing electronic circuits

Disadvantages

  • Limited endurance compared to other non-volatile memory technologies
  • Relatively higher cost per bit compared to some alternative memory solutions

Working Principles

AT28HC256F-70SI utilizes EEPROM technology, which allows for electrically erasing and reprogramming of data. The memory cells store information by trapping charges in a floating gate, which can be modified through electrical signals. The SPI interface enables communication between the chip and the controlling device.

Detailed Application Field Plans

AT28HC256F-70SI finds applications in various fields, including: 1. Microcontrollers and embedded systems 2. Automotive electronics 3. Industrial automation 4. Medical devices 5. Communication equipment

Alternative Models

Some alternative models that offer similar functionality to AT28HC256F-70SI include: 1. AT28C256-15PU 2. 25LC256-I/SN 3. M95640-WMN6TP

These models provide comparable specifications and can be considered as alternatives based on specific requirements.

In conclusion, AT28HC256F-70SI is a high-speed, low-power EEPROM chip with a large storage capacity. It offers reliable data storage and retrieval, making it suitable for various electronic applications. While it has advantages such as fast access time and low power consumption, it also has limitations in terms of endurance and cost. Nonetheless, it serves as a reliable and efficient memory solution in numerous fields.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT28HC256F-70SI in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT28HC256F-70SI in technical solutions:

  1. Q: What is the AT28HC256F-70SI? A: The AT28HC256F-70SI is a high-speed, low-power CMOS 256K (32K x 8) EEPROM memory chip.

  2. Q: What are the key features of the AT28HC256F-70SI? A: Some key features include a wide operating voltage range, fast access time, low power consumption, and high reliability.

  3. Q: What applications can the AT28HC256F-70SI be used for? A: The AT28HC256F-70SI is commonly used in various applications such as industrial control systems, automotive electronics, medical devices, and consumer electronics.

  4. Q: What is the operating voltage range of the AT28HC256F-70SI? A: The AT28HC256F-70SI operates within a voltage range of 2.7V to 5.5V.

  5. Q: How fast is the access time of the AT28HC256F-70SI? A: The AT28HC256F-70SI has a fast access time of 70 nanoseconds.

  6. Q: Can the AT28HC256F-70SI be used for both read and write operations? A: Yes, the AT28HC256F-70SI supports both read and write operations.

  7. Q: Does the AT28HC256F-70SI have any built-in security features? A: No, the AT28HC256F-70SI does not have any built-in security features.

  8. Q: What is the endurance rating of the AT28HC256F-70SI? A: The AT28HC256F-70SI has an endurance rating of 100,000 write cycles.

  9. Q: Can the AT28HC256F-70SI operate in harsh environments? A: Yes, the AT28HC256F-70SI is designed to operate in a wide temperature range and can withstand harsh environmental conditions.

  10. Q: Are there any specific programming requirements for the AT28HC256F-70SI? A: Yes, the AT28HC256F-70SI requires a specific programming voltage and timing sequence, which can be found in the datasheet provided by the manufacturer.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the official documentation and consult with technical experts for accurate information.