AT28C256-15PU belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
The AT28C256-15PU comes in a plastic DIP (Dual In-line Package) with 28 pins.
The essence of this product lies in its ability to store and retrieve digital information reliably and efficiently.
The AT28C256-15PU is typically packaged in tubes or trays, with each package containing a specified quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.
The AT28C256-15PU has a total of 28 pins, which are assigned specific functions. The pin configuration is as follows:
The AT28C256-15PU utilizes a floating-gate transistor structure to store data. It employs a combination of electric fields and charge trapping to represent binary information as electrical charges. When a specific voltage is applied, the trapped charges can be manipulated to either store or erase data.
The AT28C256-15PU finds applications in various fields, including: 1. Embedded Systems: Used for firmware storage in microcontrollers and embedded systems. 2. Computer Memory Expansion: Provides additional non-volatile storage capacity for computers. 3. Consumer Electronics: Used in devices like digital cameras, printers, and set-top boxes for data storage. 4. Automotive Electronics: Utilized in automotive systems for storing calibration data, firmware, and configuration settings.
Sure! Here are 10 common questions and answers related to the application of AT28C256-15PU in technical solutions:
Q: What is the AT28C256-15PU? A: The AT28C256-15PU is a 32K x 8 low-power CMOS EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.
Q: What is the operating voltage range for the AT28C256-15PU? A: The AT28C256-15PU operates within a voltage range of 4.5V to 5.5V.
Q: How much data can the AT28C256-15PU store? A: The AT28C256-15PU has a storage capacity of 256 kilobits, which is equivalent to 32 kilobytes.
Q: What is the access time of the AT28C256-15PU? A: The AT28C256-15PU has an access time of 150 nanoseconds.
Q: Can the AT28C256-15PU be reprogrammed? A: Yes, the AT28C256-15PU is electrically erasable and programmable, allowing for multiple reprogramming cycles.
Q: What is the endurance of the AT28C256-15PU? A: The AT28C256-15PU has a minimum endurance of 100,000 erase/write cycles.
Q: Does the AT28C256-15PU require any external power supply circuits? A: Yes, the AT28C256-15PU requires a VCC power supply and a VSS ground connection.
Q: Can the AT28C256-15PU operate in harsh environments? A: The AT28C256-15PU is designed to operate within an industrial temperature range of -40°C to +85°C, making it suitable for various environments.
Q: What interface does the AT28C256-15PU use? A: The AT28C256-15PU uses a standard 8-bit parallel interface for data transfer.
Q: Can the AT28C256-15PU be used in battery-powered devices? A: Yes, the AT28C256-15PU has low power consumption and can be used in battery-powered applications.
Please note that these answers are general and may vary depending on specific application requirements or datasheet specifications.