Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT28BV64-25SI

AT28BV64-25SI

Product Overview

Category

AT28BV64-25SI belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: The stored data is retained even when power is removed.
  • High capacity: The AT28BV64-25SI has a storage capacity of 64 kilobits (8 kilobytes).
  • Low power consumption: It operates at low voltage levels, making it energy-efficient.
  • Fast access time: The device offers quick read and write operations.
  • Reliable: It has built-in error detection and correction mechanisms.

Package

The AT28BV64-25SI is available in a Small-Outline Integrated Circuit (SOIC) package.

Essence

The essence of AT28BV64-25SI lies in its ability to provide non-volatile memory storage with high capacity and fast access times.

Packaging/Quantity

The device is typically packaged in reels or tubes, with each containing a specific quantity of AT28BV64-25SI chips.

Specifications

  • Memory Capacity: 64 kilobits (8 kilobytes)
  • Operating Voltage: 2.7V - 5.5V
  • Access Time: 250 nanoseconds
  • Interface: Parallel
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AT28BV64-25SI has a total of 28 pins, which are assigned specific functions. The pin configuration is as follows:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. VCC - Power Supply
  10. OE - Output Enable
  11. CE - Chip Enable
  12. WE - Write Enable
  13. I/O0 - Data Input/Output
  14. I/O1 - Data Input/Output
  15. I/O2 - Data Input/Output
  16. I/O3 - Data Input/Output
  17. I/O4 - Data Input/Output
  18. I/O5 - Data Input/Output
  19. I/O6 - Data Input/Output
  20. I/O7 - Data Input/Output
  21. NC - No Connection
  22. GND - Ground
  23. NC - No Connection
  24. NC - No Connection
  25. NC - No Connection
  26. NC - No Connection
  27. NC - No Connection
  28. NC - No Connection

Functional Features

  • Random Access: The AT28BV64-25SI allows for random access to any memory location, enabling efficient data retrieval.
  • High-Speed Operations: With a fast access time of 250 nanoseconds, it ensures quick read and write operations.
  • Low Power Consumption: The device operates at low voltage levels, minimizing power consumption and extending battery life in portable devices.
  • Error Detection and Correction: It incorporates error detection and correction mechanisms, ensuring data integrity.

Advantages and Disadvantages

Advantages

  • Non-volatile memory retains data even during power loss.
  • High storage capacity for various applications.
  • Fast access time enhances system performance.
  • Low power consumption prolongs battery life.
  • Error detection and correction mechanisms ensure data reliability.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per unit compared to some alternatives.
  • Limited compatibility with certain systems due to the parallel interface.

Working Principles

The AT28BV64-25SI utilizes a combination of electronic circuits and memory cells to store and retrieve data. It employs a parallel interface, allowing for simultaneous transfer of multiple bits of data. The device uses address inputs to select specific memory locations and control signals to enable read or write operations.

Detailed Application Field Plans

The AT28BV64-25SI finds applications in various electronic systems, including but not limited to: 1. Embedded systems 2. Consumer electronics 3. Industrial automation 4. Automotive electronics 5. Medical devices

In embedded systems, it can be used for firmware storage, configuration data, or program code storage. In consumer electronics, it may serve as non-volatile memory for digital cameras, set-top boxes, or gaming consoles. Industrial automation systems can utilize it for storing critical parameters or log data. Automotive electronics may employ it for storing calibration data or firmware updates. Medical devices can benefit from its non-volatile memory capabilities for storing patient data or device configurations.

Detailed and Complete Alternative Models

  1. AT28C64B-15PU: Similar to AT28BV64-25SI, this model offers 64 kilobits of non

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT28BV64-25SI in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT28BV64-25SI in technical solutions:

  1. Q: What is the AT28BV64-25SI? A: The AT28BV64-25SI is a 64K (8K x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology.

  2. Q: What is the operating voltage range for the AT28BV64-25SI? A: The AT28BV64-25SI operates within a voltage range of 2.7V to 3.6V.

  3. Q: What is the maximum clock frequency supported by the AT28BV64-25SI? A: The AT28BV64-25SI supports a maximum clock frequency of 25 MHz.

  4. Q: Can the AT28BV64-25SI be used for code storage in microcontroller-based systems? A: Yes, the AT28BV64-25SI can be used for code storage in microcontroller-based systems as it provides non-volatile memory storage.

  5. Q: How many write cycles can the AT28BV64-25SI endure? A: The AT28BV64-25SI can endure a minimum of 10,000 write cycles.

  6. Q: Does the AT28BV64-25SI support byte-level read and write operations? A: Yes, the AT28BV64-25SI supports byte-level read and write operations, allowing for efficient data manipulation.

  7. Q: Is the AT28BV64-25SI compatible with standard EEPROM interfaces? A: Yes, the AT28BV64-25SI is compatible with standard EEPROM interfaces such as SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit).

  8. Q: Can the AT28BV64-25SI be used in automotive applications? A: Yes, the AT28BV64-25SI is suitable for automotive applications as it meets the necessary temperature and reliability requirements.

  9. Q: What is the typical access time of the AT28BV64-25SI? A: The typical access time of the AT28BV64-25SI is 90 ns, allowing for fast data retrieval.

  10. Q: Does the AT28BV64-25SI support software and hardware write protection? A: Yes, the AT28BV64-25SI supports both software and hardware write protection mechanisms to prevent accidental data modification.

Please note that these answers are based on general knowledge about the AT28BV64-25SI and may vary depending on specific application requirements.