Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT27LV256A-55TC

AT27LV256A-55TC

Product Overview

Category

AT27LV256A-55TC belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for storing and retrieving digital information.

Characteristics

  • Non-volatile memory: The AT27LV256A-55TC is a non-volatile memory chip, meaning it retains stored data even when power is removed.
  • High capacity: It has a storage capacity of 256 kilobits (32 kilobytes).
  • Fast access time: The chip operates at a speed of 55 nanoseconds, allowing for quick data retrieval.
  • Low power consumption: It is designed to consume minimal power during operation.
  • Wide temperature range: The AT27LV256A-55TC can operate reliably within a wide temperature range.

Package

The AT27LV256A-55TC is available in a standard 28-pin plastic dual in-line package (PDIP).

Essence

This product serves as a crucial component in various electronic systems, enabling efficient data storage and retrieval.

Packaging/Quantity

The AT27LV256A-55TC is typically packaged in reels or tubes, with each containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory type: Non-volatile
  • Capacity: 256 kilobits (32 kilobytes)
  • Access time: 55 nanoseconds
  • Operating voltage: 5 volts
  • Temperature range: -40°C to +85°C
  • Package type: 28-pin PDIP

Detailed Pin Configuration

  1. A0: Address input
  2. A1: Address input
  3. A2: Address input
  4. A3: Address input
  5. A4: Address input
  6. A5: Address input
  7. A6: Address input
  8. A7: Address input
  9. A8: Address input
  10. A9: Address input
  11. A10: Address input
  12. A11: Address input
  13. A12: Address input
  14. A13: Address input
  15. A14: Address input
  16. /OE: Output enable
  17. /CE: Chip enable
  18. DQ0: Data input/output
  19. DQ1: Data input/output
  20. DQ2: Data input/output
  21. DQ3: Data input/output
  22. DQ4: Data input/output
  23. DQ5: Data input/output
  24. DQ6: Data input/output
  25. DQ7: Data input/output
  26. VCC: Power supply (5V)
  27. GND: Ground
  28. /WE: Write enable

Functional Features

  • Random access: The AT27LV256A-55TC allows for random access to any memory location, facilitating efficient data retrieval.
  • Low power consumption: It is designed to operate with minimal power consumption, making it suitable for battery-powered devices.
  • High reliability: This chip offers high reliability and endurance, ensuring data integrity over extended periods of use.
  • Easy integration: The AT27LV256A-55TC can be easily integrated into various electronic systems due to its standard pin configuration and compatibility with common interfaces.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • Fast access time enables quick data retrieval.
  • Wide temperature range allows for reliable operation in various environments.
  • Low power consumption prolongs battery life in portable devices.

Disadvantages

  • Limited storage capacity compared to higher-capacity memory chips.
  • Requires external circuitry for write operations.

Working Principles

The AT27LV256A-55TC utilizes a combination of electronic circuits and memory cells to store and retrieve digital information. It employs non-volatile memory technology, which relies on the physical properties of certain materials to retain stored data even when power is removed. The chip's internal circuitry enables efficient reading and writing of data, while its address inputs and control signals facilitate random access to specific memory locations.

Detailed Application Field Plans

The AT27LV256A-55TC finds applications in various electronic devices and systems, including but not limited to: 1. Microcontrollers: Used for storing program code and data in microcontroller-based systems. 2. Embedded systems: Employed as non-volatile storage in embedded systems such as industrial control systems and automotive electronics. 3. Consumer electronics: Integrated into devices like digital cameras, printers, and set-top boxes for data storage purposes. 4. Communication equipment: Utilized in networking devices, routers, and modems for storing configuration data and firmware.

Detailed and Complete Alternative Models

  1. AT27C256R-45PU: Similar non-volatile memory chip with a capacity

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT27LV256A-55TC in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT27LV256A-55TC in technical solutions:

  1. Q: What is the AT27LV256A-55TC? A: The AT27LV256A-55TC is a 256 kilobit (32K x 8) low-voltage, high-performance CMOS EPROM (erasable programmable read-only memory) integrated circuit.

  2. Q: What is the operating voltage range for the AT27LV256A-55TC? A: The AT27LV256A-55TC operates within a voltage range of 2.7V to 5.5V.

  3. Q: What is the maximum clock frequency supported by the AT27LV256A-55TC? A: The AT27LV256A-55TC supports a maximum clock frequency of 55 MHz.

  4. Q: Can the AT27LV256A-55TC be reprogrammed after it has been programmed once? A: No, the AT27LV256A-55TC is a one-time programmable EPROM and cannot be reprogrammed.

  5. Q: What is the typical access time of the AT27LV256A-55TC? A: The typical access time of the AT27LV256A-55TC is 55 ns.

  6. Q: Does the AT27LV256A-55TC require an external power supply for erasing or programming? A: No, the AT27LV256A-55TC does not require an external power supply for erasing or programming. It operates on the same voltage supply as the rest of the system.

  7. Q: Can the AT27LV256A-55TC withstand high temperatures? A: Yes, the AT27LV256A-55TC is designed to operate in a wide temperature range of -40°C to +85°C.

  8. Q: What is the package type of the AT27LV256A-55TC? A: The AT27LV256A-55TC is available in a 28-lead Thin Small Outline Package (TSOP).

  9. Q: Can the AT27LV256A-55TC be used in battery-powered devices? A: Yes, the AT27LV256A-55TC operates at low voltage and can be used in battery-powered devices.

  10. Q: Is the AT27LV256A-55TC compatible with standard microcontrollers? A: Yes, the AT27LV256A-55TC is compatible with most standard microcontrollers that support EPROM memory interfaces.

Please note that these answers are based on general information about the AT27LV256A-55TC and may vary depending on specific application requirements.