Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT27C516-55VC

AT27C516-55VC

Product Overview

Category

AT27C516-55VC belongs to the category of programmable read-only memory (PROM) chips.

Use

This chip is primarily used for storing data that needs to be permanently written and cannot be modified or erased. It is commonly employed in applications where non-volatile memory is required.

Characteristics

  • Non-volatile: The data stored in AT27C516-55VC remains intact even when power is removed.
  • High storage capacity: This chip has a capacity of 512 kilobits, allowing it to store a large amount of data.
  • Fast access time: With an access time of 55 nanoseconds, it provides quick retrieval of stored information.
  • Low power consumption: AT27C516-55VC operates efficiently with low power requirements.

Package

The AT27C516-55VC chip is available in a 28-pin dual in-line package (DIP), which is a common packaging format for integrated circuits.

Essence

The essence of AT27C516-55VC lies in its ability to provide non-volatile storage of data, making it suitable for applications that require permanent data retention.

Packaging/Quantity

AT27C516-55VC is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier.

Specifications

  • Capacity: 512 kilobits
  • Access Time: 55 nanoseconds
  • Supply Voltage: 5V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: 28-pin DIP

Detailed Pin Configuration

  1. A14
  2. A12
  3. A7
  4. A6
  5. A5
  6. A4
  7. A3
  8. A2
  9. A1
  10. A0
  11. /OE (Output Enable)
  12. /CE (Chip Enable)
  13. VSS (Ground)
  14. D7
  15. D6
  16. D5
  17. D4
  18. D3
  19. D2
  20. D1
  21. D0
  22. /WE (Write Enable)
  23. NC (No Connection)
  24. VCC (Power Supply)
  25. A8
  26. A9
  27. A11
  28. A13

Functional Features

  • Non-volatile storage: AT27C516-55VC retains data even when power is removed.
  • High-speed access: The chip provides quick retrieval of stored information with an access time of 55 nanoseconds.
  • Easy integration: It can be easily integrated into existing electronic systems due to its standard pin configuration and package format.

Advantages and Disadvantages

Advantages

  • Permanent data storage: Data written to AT27C516-55VC cannot be modified or erased, ensuring the integrity of stored information.
  • Fast access time: The chip allows for quick retrieval of data, enhancing overall system performance.
  • Low power consumption: AT27C516-55VC operates efficiently with minimal power requirements.

Disadvantages

  • Lack of flexibility: Once programmed, the data stored in AT27C516-55VC cannot be changed, limiting its adaptability to evolving needs.
  • Limited capacity: With a capacity of 512 kilobits, this chip may not be suitable for applications requiring larger storage capacities.

Working Principles

AT27C516-55VC utilizes a technology known as electrically programmable read-only memory (EPROM). This type of memory is programmed by applying specific electrical voltages to the chip's pins, which alters the state of individual memory cells. Once programmed, the data remains stored in the chip until it is physically replaced.

Detailed Application Field Plans

AT27C516-55VC finds applications in various fields, including: 1. Embedded systems: It can be used to store firmware or configuration data in microcontrollers and other embedded devices. 2. Automotive electronics: The chip can be employed for storing critical data in automotive control units, such as engine management systems. 3. Industrial automation: AT27C516-55VC can be utilized in industrial control systems to store calibration data or program code.

Detailed and Complete Alternative Models

  1. AT27C010-70PU: This chip offers a capacity of 1 megabit and operates at an access time of 70 nanoseconds.
  2. AT27C040-90PU: With a capacity of 4 megabits and an access time of 90 nanoseconds, this chip provides higher storage capabilities.
  3. AT27LV010A-12JC: This low-voltage variant offers a capacity of 1 megabit and operates at an access time of 12 nanoseconds.

These alternative models provide different capacities and access times, allowing users to choose the most suitable option based

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT27C516-55VC in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT27C516-55VC in technical solutions:

  1. Q: What is the AT27C516-55VC? A: The AT27C516-55VC is a 16-megabit (2M x 8) low-power, high-performance CMOS EPROM (erasable programmable read-only memory) integrated circuit.

  2. Q: What are the key features of the AT27C516-55VC? A: Some key features include a fast access time of 55ns, low power consumption, compatibility with industry-standard EPROM programmers, and a wide operating voltage range.

  3. Q: How can the AT27C516-55VC be used in technical solutions? A: It can be used for storing firmware, program code, or data in various applications such as embedded systems, microcontrollers, industrial control systems, and consumer electronics.

  4. Q: What is the maximum storage capacity of the AT27C516-55VC? A: The AT27C516-55VC has a maximum storage capacity of 16 megabits, which is equivalent to 2 megabytes.

  5. Q: Can the AT27C516-55VC be reprogrammed? A: No, the AT27C516-55VC is not a reprogrammable memory device. Once programmed, the data remains permanently stored until it is erased using UV light.

  6. Q: What is the operating voltage range of the AT27C516-55VC? A: The AT27C516-55VC operates within a voltage range of 4.5V to 5.5V.

  7. Q: Is the AT27C516-55VC compatible with standard EPROM programmers? A: Yes, the AT27C516-55VC is compatible with most industry-standard EPROM programmers, making it easy to program and integrate into existing systems.

  8. Q: What is the typical access time of the AT27C516-55VC? A: The typical access time of the AT27C516-55VC is 55 nanoseconds, allowing for fast read operations.

  9. Q: Can the AT27C516-55VC operate in harsh environments? A: Yes, the AT27C516-55VC is designed to operate reliably in a wide temperature range (-40°C to +85°C) and can withstand industrial or automotive environments.

  10. Q: Are there any special considerations when using the AT27C516-55VC? A: It is important to handle the AT27C516-55VC with care to avoid static discharge. Additionally, proper UV erasure techniques should be followed if reprogramming is required.

Please note that these answers are general and may vary depending on specific application requirements.