AT27C256R-15RI belongs to the category of programmable read-only memory (PROM) chips.
This chip is commonly used for storing non-volatile data that needs to be retained even when power is turned off. It is widely utilized in various electronic devices such as computers, microcontrollers, and consumer electronics.
The AT27C256R-15RI is available in a standard dual in-line package (DIP). This package type consists of two parallel rows of pins, which can be easily inserted into a socket on a circuit board.
The essence of the AT27C256R-15RI lies in its ability to store and retrieve data reliably, making it an essential component in many electronic systems.
The chip is typically packaged in tubes or trays, with each tube or tray containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.
The AT27C256R-15RI has a total of 28 pins, each serving a specific function. The pin configuration is as follows:
The AT27C256R-15RI offers the following functional features:
The AT27C256R-15RI operates based on the principle of electrically erasable programmable read-only memory (EEPROM). It uses a grid of transistors to store binary data in the form of electrical charges. The stored data can be accessed by applying appropriate voltage levels to the chip's pins.
The AT27C256R-15RI finds applications in various fields, including:
There are several alternative models available that offer similar functionality to the AT27C256R-15RI. Some notable alternatives include:
These alternative models share similar specifications and pin configurations, making them suitable replacements for the AT27C256R-15RI in various applications.
*Word count
Sure! Here are 10 common questions and answers related to the application of AT27C256R-15RI in technical solutions:
Q: What is the AT27C256R-15RI? A: The AT27C256R-15RI is a 256-kilobit (32K x 8) CMOS EPROM (Electrically Programmable Read-Only Memory) integrated circuit.
Q: What are the typical applications of the AT27C256R-15RI? A: The AT27C256R-15RI is commonly used in various applications such as microcontroller programming, firmware storage, data logging, and code storage for embedded systems.
Q: How does the AT27C256R-15RI work? A: The AT27C256R-15RI is programmed by applying specific voltage levels to its pins using a programmer device. Once programmed, it retains the stored data even when power is removed.
Q: What is the operating voltage range of the AT27C256R-15RI? A: The AT27C256R-15RI operates within a voltage range of 4.5V to 5.5V.
Q: Can the AT27C256R-15RI be reprogrammed? A: No, the AT27C256R-15RI is a one-time programmable EPROM and cannot be electrically erased or reprogrammed once programmed.
Q: What is the access time of the AT27C256R-15RI? A: The AT27C256R-15RI has an access time of 150 nanoseconds (ns), meaning it takes approximately 150 ns to retrieve data from the memory after providing the address.
Q: Does the AT27C256R-15RI require any external components for operation? A: No, the AT27C256R-15RI does not require any additional components for its basic operation. It can be directly connected to a microcontroller or other digital circuitry.
Q: What is the temperature range in which the AT27C256R-15RI operates? A: The AT27C256R-15RI operates within a temperature range of -40°C to +85°C.
Q: Can the AT27C256R-15RI withstand electrostatic discharge (ESD)? A: Yes, the AT27C256R-15RI is designed to withstand ESD up to 2,000 volts.
Q: Is the AT27C256R-15RI available in different package options? A: Yes, the AT27C256R-15RI is available in various package options such as PDIP (Plastic Dual In-Line Package) and SOIC (Small Outline Integrated Circuit).