AT27C256R-12TC belongs to the category of programmable read-only memory (PROM) chips.
This chip is primarily used for storing data that needs to be permanently stored and cannot be modified or erased. It is commonly used in various electronic devices such as computers, microcontrollers, and consumer electronics.
AT27C256R-12TC is available in a Thin Small Outline Package (TSOP). This package provides a compact form factor and facilitates easy integration into electronic circuits.
The essence of AT27C256R-12TC lies in its ability to store data permanently, ensuring that critical information remains intact even during power outages or system resets.
AT27C256R-12TC is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer and supplier.
AT27C256R-12TC has a total of 28 pins. The pin configuration is as follows:
AT27C256R-12TC is based on the principle of electrically programmable read-only memory (EPROM). The data is stored in a matrix of memory cells, with each cell representing a bit. Programming is achieved by applying specific voltage levels to the address inputs and data inputs while enabling the write operation. Once programmed, the data remains unchanged until the chip is replaced.
AT27C256R-12TC finds applications in various fields, including:
Sure! Here are 10 common questions and answers related to the application of AT27C256R-12TC in technical solutions:
Q: What is the AT27C256R-12TC? A: The AT27C256R-12TC is a 32K x 8 low-power, high-performance CMOS EPROM (Electrically Programmable Read-Only Memory) chip.
Q: What is the maximum operating frequency of the AT27C256R-12TC? A: The AT27C256R-12TC can operate at a maximum frequency of 12 MHz.
Q: How much data can the AT27C256R-12TC store? A: The AT27C256R-12TC has a storage capacity of 256 kilobits or 32 kilobytes.
Q: Can the AT27C256R-12TC be reprogrammed? A: No, the AT27C256R-12TC is a one-time programmable memory chip and cannot be reprogrammed once programmed.
Q: What is the power supply voltage range for the AT27C256R-12TC? A: The AT27C256R-12TC operates with a power supply voltage range of 4.5V to 5.5V.
Q: What is the access time of the AT27C256R-12TC? A: The AT27C256R-12TC has an access time of 120 ns, meaning it takes 120 nanoseconds to retrieve data after an address is provided.
Q: Can the AT27C256R-12TC withstand high temperatures? A: Yes, the AT27C256R-12TC is designed to operate in a temperature range of -40°C to +85°C.
Q: What is the package type of the AT27C256R-12TC? A: The AT27C256R-12TC comes in a 28-pin Thin Small Outline Package (TSOP).
Q: Can the AT27C256R-12TC be used in battery-powered devices? A: Yes, the AT27C256R-12TC is a low-power chip and can be used in battery-powered devices.
Q: Is the AT27C256R-12TC compatible with standard microcontrollers? A: Yes, the AT27C256R-12TC has a standard parallel interface and can be easily interfaced with most microcontrollers.
Please note that these answers are based on general information about the AT27C256R-12TC and may vary depending on specific application requirements.