Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT27C2048-15VI

AT27C2048-15VI

Product Overview

Category

AT27C2048-15VI belongs to the category of programmable read-only memory (PROM) chips.

Use

This product is primarily used for storing data that needs to be permanently written and cannot be modified or erased. It is commonly employed in applications where non-volatile memory is required.

Characteristics

  • Non-volatile: The stored data remains intact even when power is removed.
  • High storage capacity: The AT27C2048-15VI has a capacity of 2,048 kilobits (256 kilobytes).
  • Fast access time: With a speed rating of 150 nanoseconds, it provides quick access to stored data.
  • Low power consumption: The chip operates on low power, making it suitable for battery-powered devices.

Package

The AT27C2048-15VI is available in a 40-pin dual in-line package (DIP), which is a common form factor for integrated circuits.

Essence

The essence of this product lies in its ability to store data permanently, ensuring that critical information remains intact even in the absence of power.

Packaging/Quantity

The AT27C2048-15VI is typically packaged in tubes or trays, with each tube or tray containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory Capacity: 2,048 kilobits (256 kilobytes)
  • Access Time: 150 nanoseconds
  • Operating Voltage: 5 volts
  • Package Type: 40-pin DIP

Detailed Pin Configuration

  1. A16 - Address Input
  2. A15 - Address Input
  3. A12 - Address Input
  4. A7 - Address Input
  5. A6 - Address Input
  6. A5 - Address Input
  7. A4 - Address Input
  8. A3 - Address Input
  9. A2 - Address Input
  10. A1 - Address Input
  11. A0 - Address Input
  12. /OE - Output Enable
  13. /CE - Chip Enable
  14. VCC - Power Supply
  15. DQ0 - Data Input/Output
  16. DQ1 - Data Input/Output
  17. DQ2 - Data Input/Output
  18. DQ3 - Data Input/Output
  19. DQ4 - Data Input/Output
  20. DQ5 - Data Input/Output
  21. DQ6 - Data Input/Output
  22. DQ7 - Data Input/Output
  23. VSS - Ground
  24. NC - No Connection
  25. NC - No Connection
  26. NC - No Connection
  27. NC - No Connection
  28. NC - No Connection
  29. NC - No Connection
  30. NC - No Connection
  31. NC - No Connection
  32. NC - No Connection
  33. NC - No Connection
  34. NC - No Connection
  35. NC - No Connection
  36. NC - No Connection
  37. NC - No Connection
  38. NC - No Connection
  39. NC - No Connection
  40. NC - No Connection

Functional Features

  • Permanent data storage: The AT27C2048-15VI allows for the permanent storage of data, ensuring its integrity even in the absence of power.
  • High-speed access: With a fast access time of 150 nanoseconds, this chip enables quick retrieval of stored information.
  • Easy integration: The 40-pin DIP package facilitates easy integration into various electronic systems.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention without power supply.
  • High storage capacity allows for storing a significant amount of data.
  • Fast access time enables quick retrieval of information.
  • Low power consumption makes it suitable for battery-powered devices.

Disadvantages

  • Data cannot be modified or erased once programmed, limiting its flexibility compared to other memory types.
  • Limited endurance: The number of write cycles is typically lower compared to other memory technologies.

Working Principles

The AT27C2048-15VI utilizes a technology known as electrically programmable read-only memory (EPROM). It consists of a grid of memory cells that can be programmed by applying electrical signals. Once programmed, the data remains stored in the memory cells until the chip is replaced.

Detailed Application Field Plans

The AT27C2048-15VI finds applications in various fields, including: 1. Embedded systems: Used for firmware storage in microcontrollers and other embedded devices. 2. Automotive electronics: Employed for storing critical data such as calibration parameters and configuration settings. 3. Industrial control systems: Utilized for storing program code and configuration data in industrial automation equipment. 4. Consumer electronics: Used in devices like gaming consoles and set-top boxes

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT27C2048-15VI in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT27C2048-15VI in technical solutions:

  1. Q: What is the AT27C2048-15VI? A: The AT27C2048-15VI is a 2-megabit (256K x 8) low-power, high-performance CMOS EPROM (Electrically Programmable Read-Only Memory) integrated circuit.

  2. Q: What are the key features of the AT27C2048-15VI? A: The key features include a fast access time of 150 ns, low power consumption, wide operating voltage range, and compatibility with various programming equipment.

  3. Q: How can I use the AT27C2048-15VI in my technical solution? A: The AT27C2048-15VI can be used for storing firmware, configuration data, or other non-volatile information in embedded systems, microcontrollers, or any application requiring reliable and non-volatile memory.

  4. Q: Can I program the AT27C2048-15VI multiple times? A: No, the AT27C2048-15VI is a one-time programmable EPROM. Once programmed, the data cannot be changed or erased.

  5. Q: What is the maximum operating frequency of the AT27C2048-15VI? A: The AT27C2048-15VI can operate at frequencies up to 33 MHz, making it suitable for applications that require high-speed access to stored data.

  6. Q: Does the AT27C2048-15VI require an external power supply? A: Yes, the AT27C2048-15VI requires a separate power supply (+5V) for proper operation.

  7. Q: Can I use the AT27C2048-15VI in both industrial and automotive applications? A: Yes, the AT27C2048-15VI is designed to operate reliably in a wide temperature range (-40°C to +85°C) and is suitable for both industrial and automotive applications.

  8. Q: What is the pin configuration of the AT27C2048-15VI? A: The AT27C2048-15VI has 32 pins, including address inputs, data inputs/outputs, control inputs, and power supply pins. Please refer to the datasheet for the detailed pinout.

  9. Q: Can I interface the AT27C2048-15VI with microcontrollers or other digital devices? A: Yes, the AT27C2048-15VI has standard TTL-compatible inputs and outputs, making it easy to interface with microcontrollers, CPUs, or other digital devices.

  10. Q: Are there any special precautions I need to take while handling or programming the AT27C2048-15VI? A: Yes, it is important to follow proper ESD (Electrostatic Discharge) precautions while handling the AT27C2048-15VI to prevent damage. Additionally, ensure that the programming voltage and timing requirements specified in the datasheet are met during programming operations.

Please note that these answers are general and may vary depending on specific application requirements. Always refer to the manufacturer's datasheet and guidelines for accurate information.