Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT25P1024C1-10CI-1.8
Details bekijken DataSheets

AT25P1024C1-10CI-1.8

Product Overview

Category

The AT25P1024C1-10CI-1.8 belongs to the category of serial NOR Flash memory.

Use

It is commonly used for storing program code and data in various electronic devices such as microcontrollers, IoT devices, and consumer electronics.

Characteristics

  • High-speed read operations
  • Low power consumption
  • Wide operating voltage range
  • Small package size

Package

The AT25P1024C1-10CI-1.8 is available in a compact 8-lead SOIC package.

Essence

The essence of this product lies in its ability to provide non-volatile memory storage with high performance and low power consumption.

Packaging/Quantity

It is typically supplied in reels with a quantity of 2500 units per reel.

Specifications

  • Memory Size: 1Mb (128K x 8)
  • Interface: SPI
  • Voltage Range: 1.65V to 1.95V
  • Operating Temperature: -40°C to 85°C
  • Data Retention: 20 years

Detailed Pin Configuration

The AT25P1024C1-10CI-1.8 features the following pin configuration: 1. Chip Select (/CS) 2. Serial Clock (SCK) 3. Serial Data Input (SI) 4. Serial Data Output (SO) 5. Write Protect (/WP) 6. Ground (GND) 7. Power Supply (VCC) 8. Hold (/HOLD)

Functional Features

  • Fast Read and Page Read Operations
  • Sector and Block Erase Capability
  • Software and Hardware Protection of Memory
  • Deep Power-down Mode for Ultra-low Power Consumption

Advantages

  • High-speed data transfer
  • Low power consumption
  • Compact package size
  • Versatile interface compatibility

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Sensitive to environmental factors such as temperature and voltage fluctuations

Working Principles

The AT25P1024C1-10CI-1.8 operates on the principle of using electrical charges to store and retrieve digital information. It utilizes a serial peripheral interface (SPI) for communication with the host device and employs floating gate technology for non-volatile data storage.

Detailed Application Field Plans

This product is well-suited for applications requiring reliable non-volatile memory storage, such as: - Firmware storage in embedded systems - Configuration storage in IoT devices - Parameter storage in industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the AT25P1024C1-10CI-1.8 include: - W25Q128JVSIQ (Winbond) - S25FL116K (Cypress) - MX25L12835F (Macronix)

In conclusion, the AT25P1024C1-10CI-1.8 offers a balance of performance, power efficiency, and compact design, making it a suitable choice for various memory storage applications in electronic devices.

Word Count: 443

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT25P1024C1-10CI-1.8 in technische oplossingen

  1. What is the AT25P1024C1-10CI-1.8?

    • The AT25P1024C1-10CI-1.8 is a 128K x 8 SPI serial EEPROM with a wide operating voltage range of 1.7V to 3.6V.

  2. What are the typical applications for the AT25P1024C1-10CI-1.8?

    • Typical applications include code storage, data logging, configuration storage, and parameter storage in various electronic systems.

  3. What is the maximum clock frequency supported by the AT25P1024C1-10CI-1.8?

    • The AT25P1024C1-10CI-1.8 supports a maximum clock frequency of 20MHz.

  4. What is the write endurance of the AT25P1024C1-10CI-1.8?

    • The AT25P1024C1-10CI-1.8 has a minimum of 100,000 write cycles per sector.

  5. What is the operating temperature range of the AT25P1024C1-10CI-1.8?

    • The AT25P1024C1-10CI-1.8 operates within a temperature range of -40°C to 85°C.

  6. Does the AT25P1024C1-10CI-1.8 support software protection of memory sectors?

    • Yes, the AT25P1024C1-10CI-1.8 supports software protection of memory sectors to prevent inadvertent writes.

  7. What is the package type of the AT25P1024C1-10CI-1.8?

    • The AT25P1024C1-10CI-1.8 is available in an 8-lead SOIC package.

  8. Can the AT25P1024C1-10CI-1.8 operate at low voltages?

    • Yes, the AT25P1024C1-10CI-1.8 has a wide operating voltage range from 1.7V to 3.6V, making it suitable for low-power applications.

  9. Is the AT25P1024C1-10CI-1.8 RoHS compliant?

    • Yes, the AT25P1024C1-10CI-1.8 is RoHS compliant, meeting environmental standards.

  10. Are there any known compatibility issues with microcontrollers when using the AT25P1024C1-10CI-1.8?

    • The AT25P1024C1-10CI-1.8 is designed to be compatible with a wide range of microcontrollers that support SPI communication, minimizing compatibility issues.