Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
AT25320T2-10TI
Details bekijken DataSheets

AT25320T2-10TI

Product Overview

Category

AT25320T2-10TI belongs to the category of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.

Use

This product is primarily used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile memory: The AT25320T2-10TI retains stored data even when power is removed.
  • High storage capacity: This chip has a storage capacity of 32 kilobits (4 kilobytes).
  • Serial interface: It utilizes a serial communication protocol for data transfer.
  • Low power consumption: The AT25320T2-10TI operates at low power levels, making it suitable for battery-powered devices.
  • Wide operating voltage range: It can function within a voltage range of 1.8V to 5.5V.
  • High-speed performance: This chip offers fast read and write operations.

Package and Quantity

The AT25320T2-10TI is available in a small form factor package, such as a Thin Small Outline Package (TSOP). The exact packaging and quantity may vary depending on the manufacturer and supplier.

Specifications

  • Storage Capacity: 32 kilobits (4 kilobytes)
  • Interface: Serial
  • Operating Voltage Range: 1.8V to 5.5V
  • Package Type: TSOP (specific package may vary)

Pin Configuration

The AT25320T2-10TI chip has a specific pin configuration that enables its proper functioning. The following table outlines the pin assignments:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | CS | Chip Select | | 2 | SO | Serial Data Output | | 3 | WP | Write Protect | | 4 | GND | Ground | | 5 | SI | Serial Data Input | | 6 | SCK | Serial Clock | | 7 | HOLD | Hold Input | | 8 | VCC | Power Supply |

Functional Features

The AT25320T2-10TI offers several functional features that enhance its usability and performance:

  1. High-Speed Operation: This chip supports high-speed read and write operations, allowing for efficient data transfer.
  2. Flexible Interface: The serial interface enables easy integration with various microcontrollers and other devices.
  3. Write Protection: The WP pin allows users to protect the stored data from accidental modification.
  4. Low Power Consumption: The AT25320T2-10TI operates at low power levels, making it suitable for energy-efficient applications.
  5. Reliable Data Retention: The non-volatile memory ensures that stored data remains intact even during power loss or device shutdown.

Advantages and Disadvantages

Advantages

  • High-speed operation facilitates quick data access.
  • Flexible interface enables seamless integration with different systems.
  • Write protection feature enhances data security.
  • Low power consumption prolongs battery life in portable devices.
  • Reliable data retention ensures data integrity.

Disadvantages

  • Limited storage capacity compared to larger EEPROM chips.
  • Serial interface may have slower data transfer rates compared to parallel interfaces.
  • Vulnerable to electromagnetic interference due to small package size.

Working Principles

The AT25320T2-10TI utilizes electrically erasable programmable read-only memory technology. It stores data by trapping charges within a floating gate transistor structure. The stored charges represent binary information, which can be read or modified through the serial interface. The chip's control pins enable functions such as chip selection, data input/output, and write protection.

Application Field Plans

The AT25320T2-10TI finds applications in various fields, including:

  1. Automotive: Used for storing configuration data in automotive electronic control units (ECUs).
  2. Industrial Automation: Employed in programmable logic controllers (PLCs) for data storage.
  3. Consumer Electronics: Integrated into devices like smart TVs, set-top boxes, and gaming consoles for firmware storage.
  4. Medical Devices: Utilized in medical equipment for storing calibration data and device settings.
  5. Internet of Things (IoT): Incorporated into IoT devices for data logging and configuration storage.

Alternative Models

Several alternative models with similar functionality to the AT25320T2-10TI are available in the market. Some notable alternatives include:

  1. AT25SF041: Offers a higher storage capacity of 4 megabits (512 kilobytes).
  2. CAT24C02: Provides a lower storage capacity of 2 kilobits (256 bytes).
  3. M95080: Features a wider operating voltage range of 2.5V to

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT25320T2-10TI in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of AT25320T2-10TI in technical solutions:

  1. Q: What is AT25320T2-10TI? A: AT25320T2-10TI is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by a company called Atmel.

  2. Q: What is the storage capacity of AT25320T2-10TI? A: AT25320T2-10TI has a storage capacity of 32 kilobits, which is equivalent to 4 kilobytes.

  3. Q: What are some common applications of AT25320T2-10TI? A: AT25320T2-10TI is commonly used in various technical solutions such as automotive electronics, industrial control systems, consumer electronics, and medical devices.

  4. Q: How does AT25320T2-10TI connect to other components in a system? A: AT25320T2-10TI typically connects to other components using a standard SPI (Serial Peripheral Interface) protocol.

  5. Q: Can AT25320T2-10TI be reprogrammed multiple times? A: Yes, AT25320T2-10TI is an EEPROM chip, which means it can be electrically erased and reprogrammed multiple times.

  6. Q: What is the operating voltage range of AT25320T2-10TI? A: The operating voltage range of AT25320T2-10TI is typically between 2.7V and 5.5V.

  7. Q: Does AT25320T2-10TI have any built-in security features? A: Yes, AT25320T2-10TI includes hardware and software write protection features to prevent unauthorized access or modification of data.

  8. Q: What is the maximum operating frequency of AT25320T2-10TI? A: The maximum operating frequency of AT25320T2-10TI is typically 10 MHz.

  9. Q: Can AT25320T2-10TI operate in extreme temperature conditions? A: Yes, AT25320T2-10TI is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

  10. Q: Is AT25320T2-10TI RoHS compliant? A: Yes, AT25320T2-10TI is compliant with the Restriction of Hazardous Substances (RoHS) directive, which restricts the use of certain hazardous materials in electronic products.

Please note that the specific details and specifications may vary depending on the manufacturer and version of the AT25320T2-10TI chip.