AT25160-10PC-1.8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Serial EEPROM Memory
• Characteristics:
  • Low-power CMOS technology
  • High-speed performance
  • Wide operating voltage range
  • Small form factor
• Package: PDIP (Plastic Dual In-line Package)
• Essence: The AT25160-10PC-1.8 is a 16,384-bit electrically erasable programmable read-only memory (EEPROM) organized as 2048 words of 8 bits each.
• Packaging/Quantity: Available in tubes or tape and reel packaging, with quantities varying based on customer requirements.

Specifications

• Memory Size: 16,384 bits (2,048 bytes)
• Operating Voltage Range: 1.8V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Write Time: 5ms (maximum)
• Data Retention: 100 years (minimum)

Detailed Pin Configuration

The AT25160-10PC-1.8 has a total of 8 pins, which are assigned specific functions as follows:

| Pin Number | Name | Function | |------------|------|----------| | 1 | CS | Chip Select (active low) | | 2 | DO | Data Output | | 3 | WP | Write Protect (active low) | | 4 | GND | Ground | | 5 | DI | Data Input | | 6 | CLK | Clock Input | | 7 | NC | No Connection | | 8 | VCC | Power Supply (1.8V to 5.5V) |

Functional Features

• High-speed SPI (Serial Peripheral Interface) compatible bus
• Byte and page-level write operations
• Software and hardware write protection options
• Self-timed erase and write cycles
• Sequential read operation
• Low power consumption during standby mode

Advantages

• Wide operating voltage range allows compatibility with various systems
• Small form factor enables integration into space-constrained designs
• High-speed performance facilitates quick data transfer
• Long data retention period ensures reliable storage of information
• Versatile write protection options provide enhanced security

Disadvantages

• Limited memory size may not be suitable for applications requiring larger storage capacity
• Lack of additional features, such as built-in error correction codes, may limit certain use cases

Working Principles

The AT25160-10PC-1.8 utilizes electrically erasable programmable read-only memory technology to store and retrieve digital information. It employs a serial peripheral interface for communication with the host system. The chip select (CS), clock (CLK), data input (DI), and data output (DO) pins facilitate data transfer between the IC and the external device. The write protect (WP) pin allows software or hardware-based protection against accidental writes.

Detailed Application Field Plans

The AT25160-10PC-1.8 is commonly used in various electronic devices and systems, including but not limited to: - Consumer electronics (e.g., smartphones, tablets, digital cameras) - Automotive electronics (e.g., engine control units, infotainment systems) - Industrial automation (e.g., programmable logic controllers, sensors) - Medical equipment (e.g., patient monitoring devices, diagnostic instruments) - Communication systems (e.g., routers, modems)

Detailed and Complete Alternative Models

• AT25080A-10PU-2.7: 8,192-bit EEPROM with similar specifications and package
• AT25320A-10PI-2.5: 32,768-bit EEPROM with extended temperature range and different package
• AT25640B-SSHL-T: 64,512-bit EEPROM with SPI and Microwire interface options

Please note that the above alternative models are just a few examples, and there are several other alternatives available in the market.

Word count: 526 words