AT24C64N-10SI-1.8 belongs to the category of EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.
This product is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
The AT24C64N-10SI-1.8 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer and supplier.
The AT24C64N-10SI-1.8 has the following pin configuration:
The AT24C64N-10SI-1.8 utilizes EEPROM technology, which is based on floating-gate transistors. These transistors store charge to represent binary data. When data needs to be written or erased, an electric field is applied to the floating gate, allowing electrons to tunnel through the insulating layer and modify the charge level. This process enables non-volatile data storage and reprogramming.
The AT24C64N-10SI-1.8 finds applications in various fields, including:
These alternative models provide options for different storage requirements while maintaining compatibility
Sure! Here are 10 common questions and answers related to the application of AT24C64N-10SI-1.8 in technical solutions:
Q1: What is AT24C64N-10SI-1.8? A1: AT24C64N-10SI-1.8 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology. It has a capacity of 64 kilobits (8 kilobytes) and operates at a voltage of 1.8V.
Q2: What are the typical applications of AT24C64N-10SI-1.8? A2: AT24C64N-10SI-1.8 is commonly used for storing small amounts of non-volatile data in various electronic devices, such as microcontrollers, sensors, and communication modules.
Q3: How does AT24C64N-10SI-1.8 communicate with other devices? A3: AT24C64N-10SI-1.8 uses the I2C (Inter-Integrated Circuit) protocol for communication. It has a 2-wire serial interface consisting of a data line (SDA) and a clock line (SCL).
Q4: What is the maximum operating frequency of AT24C64N-10SI-1.8? A4: The maximum operating frequency of AT24C64N-10SI-1.8 is 400 kHz.
Q5: Can AT24C64N-10SI-1.8 be used in both 3.3V and 5V systems? A5: Yes, AT24C64N-10SI-1.8 supports both 3.3V and 5V systems, making it compatible with a wide range of electronic devices.
Q6: How many bytes can be stored in AT24C64N-10SI-1.8? A6: AT24C64N-10SI-1.8 has a capacity of 64 kilobits, which is equivalent to 8 kilobytes. Therefore, it can store up to 8192 bytes of data.
Q7: Is AT24C64N-10SI-1.8 capable of random access? A7: Yes, AT24C64N-10SI-1.8 supports random access, allowing data to be read from or written to any specific memory location within its address space.
Q8: What is the typical write endurance of AT24C64N-10SI-1.8? A8: AT24C64N-10SI-1.8 has a typical write endurance of 1 million cycles. This means that data can be written and erased from the chip up to 1 million times before it may start to degrade.
Q9: Does AT24C64N-10SI-1.8 have built-in security features? A9: No, AT24C64N-10SI-1.8 does not have built-in security features. It is a standard EEPROM chip without any hardware encryption or protection mechanisms.
Q10: Can AT24C64N-10SI-1.8 operate in extreme temperature conditions? A10: Yes, AT24C64N-10SI-1.8 is designed to operate in a wide temperature range, typically from -40°C to +85°C, making it suitable for various industrial and automotive applications.
Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.