Zie specificaties voor productdetails.
AT24C512N-10SU-2.7
Product Overview
Category
AT24C512N-10SU-2.7 belongs to the category of EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.
Use
This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
Characteristics
- Non-volatile memory: The AT24C512N-10SU-2.7 retains stored data even when power is removed.
- High capacity: With a capacity of 512 kilobits (64 kilobytes), it offers ample storage space.
- Low power consumption: The chip operates at low power levels, making it suitable for battery-powered devices.
- I2C interface: It utilizes the I2C (Inter-Integrated Circuit) protocol for communication with other devices.
- Wide operating voltage range: The chip can operate within a voltage range of 1.7V to 5.5V.
Package
The AT24C512N-10SU-2.7 is available in a small outline SOIC (Small Outline Integrated Circuit) package.
Essence
The essence of this product lies in its ability to provide reliable and non-volatile storage for critical data in electronic systems.
Packaging/Quantity
The AT24C512N-10SU-2.7 is typically packaged in reels or tubes, containing a quantity of 250 units per reel/tube.
Specifications
- Capacity: 512 kilobits (64 kilobytes)
- Interface: I2C
- Operating Voltage: 1.7V - 5.5V
- Operating Temperature Range: -40°C to +85°C
- Write Cycle Endurance: 1 million cycles
- Data Retention: 100 years
Detailed Pin Configuration
The AT24C512N-10SU-2.7 has a total of 8 pins, which are assigned specific functions as follows:
- A0: Address Input
- A1: Address Input
- A2: Address Input
- GND: Ground
- SDA: Serial Data Input/Output
- SCL: Serial Clock Input
- WP: Write Protect
- VCC: Power Supply
Functional Features
- Random access: The chip allows for random read and write operations to any memory location.
- Byte-level operations: It supports byte-level read and write operations, providing flexibility in data manipulation.
- Hardware write protection: The WP pin can be used to protect the memory from accidental writes.
- Software write protection: The chip also offers software-based write protection through specific commands.
Advantages and Disadvantages
Advantages
- High storage capacity
- Low power consumption
- Wide operating voltage range
- Long data retention period
- Flexible addressing options
Disadvantages
- Relatively slower write speeds compared to other memory technologies
- Limited endurance for write cycles
Working Principles
The AT24C512N-10SU-2.7 utilizes EEPROM technology, which allows for electrically erasing and reprogramming of data. It stores information in a grid of memory cells, with each cell capable of holding one bit of data. The data is written or read by applying appropriate voltage levels to the memory cells through the I2C interface.
Detailed Application Field Plans
The AT24C512N-10SU-2.7 finds applications in various fields, including: 1. Embedded systems: Used for storing configuration settings, calibration data, and firmware updates. 2. Automotive electronics: Employed in vehicle control units for storing critical parameters and event logs. 3. Industrial automation: Utilized for data logging, configuration storage, and device identification. 4. Consumer electronics: Found in devices like smart TVs, set-top boxes, and gaming consoles for storing user preferences and settings.
Detailed and Complete Alternative Models
- AT24C01A: 1 kilobit (128 bytes) capacity, I2C interface.
- AT24C256C: 256 kilobits (32 kilobytes) capacity, I2C interface, extended temperature range.
- AT25080B: 8 kilobits (1 kilobyte) capacity, SPI (Serial Peripheral Interface) interface.
- AT93C46A: 1 kilobit (128 bytes) capacity, Microwire interface.
These alternative models offer different capacities, interfaces, and features to suit specific application requirements.
Word count: 550 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van AT24C512N-10SU-2.7 in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of AT24C512N-10SU-2.7 in technical solutions:
Q: What is the AT24C512N-10SU-2.7? A: The AT24C512N-10SU-2.7 is a 512-kilobit (64K x 8) electrically erasable programmable read-only memory (EEPROM) chip.
Q: What are the typical applications of AT24C512N-10SU-2.7? A: It is commonly used for storing configuration data, calibration tables, or other non-volatile data in various electronic devices.
Q: What is the operating voltage range of AT24C512N-10SU-2.7? A: The operating voltage range is typically between 1.7V and 5.5V.
Q: How much data can be stored in AT24C512N-10SU-2.7? A: The chip has a capacity of 512 kilobits, which translates to 64 kilobytes of data storage.
Q: What is the maximum clock frequency supported by AT24C512N-10SU-2.7? A: The maximum clock frequency is 2.7 MHz.
Q: Can AT24C512N-10SU-2.7 be interfaced with microcontrollers? A: Yes, it can be easily interfaced with most microcontrollers using standard I2C communication protocol.
Q: Does AT24C512N-10SU-2.7 support write protection? A: Yes, it supports software write protection, allowing you to protect specific memory areas from being overwritten.
Q: What is the typical endurance of AT24C512N-10SU-2.7? A: It has a typical endurance of 1 million write cycles, meaning you can write data to it up to 1 million times before it may start to degrade.
Q: Can AT24C512N-10SU-2.7 operate in extreme temperature conditions? A: Yes, it has an extended temperature range and can operate reliably in temperatures ranging from -40°C to +85°C.
Q: Is AT24C512N-10SU-2.7 RoHS compliant? A: Yes, it is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.
Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for the AT24C512N-10SU-2.7 chip.