AT24C16N-10SC-1.8

Product Overview

Category

AT24C16N-10SC-1.8 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.

Characteristics

• Electrically erasable: The AT24C16N-10SC-1.8 can be erased and reprogrammed electronically, making it convenient for data updates.
• Non-volatile: The stored data remains intact even when power is removed.
• Low power consumption: This chip operates at low power levels, making it suitable for battery-powered devices.
• High storage capacity: The AT24C16N-10SC-1.8 has a storage capacity of 16 kilobits (2 kilobytes), allowing for ample data storage.

Package

The AT24C16N-10SC-1.8 comes in an industry-standard 8-pin small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact form factor.

Packaging/Quantity

The AT24C16N-10SC-1.8 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Operating voltage: 1.8V
• Maximum clock frequency: 400 kHz
• Write cycle time: 5 ms (maximum)
• Data retention: 100 years (minimum)
• Endurance: 1 million write cycles (minimum)

Detailed Pin Configuration

The AT24C16N-10SC-1.8 has the following pin configuration:

1. A0: Address input
2. A1: Address input
3. A2: Address input
4. GND: Ground
5. SDA: Serial data input/output
6. SCL: Serial clock input
7. WP: Write protect (optional)
8. VCC: Power supply

Functional Features

• Random access: The AT24C16N-10SC-1.8 allows for random access to any memory location, enabling efficient data retrieval.
• Sequential read and write operations: This chip supports sequential read and write operations, facilitating easy data manipulation.
• Hardware write protection: The optional write protect (WP) pin can be used to prevent accidental writes to the memory, enhancing data security.

Advantages and Disadvantages

Advantages

• Non-volatile storage: The stored data remains intact even in the absence of power.
• High endurance: The AT24C16N-10SC-1.8 can withstand a large number of write cycles.
• Compact form factor: The small package size makes it suitable for space-constrained applications.

Disadvantages

• Limited storage capacity: With a capacity of 16 kilobits, this chip may not be sufficient for applications requiring extensive data storage.
• Relatively slow write cycle time: The 5 ms write cycle time may result in slower data update rates compared to other EEPROM chips.

Working Principles

The AT24C16N-10SC-1.8 utilizes electrically controlled floating gate transistors to store and retrieve data. When writing data, an electrical charge is applied to the floating gate, altering its conductivity and storing the desired information. During read operations, the stored charge is measured, allowing the retrieval of the stored data.

Detailed Application Field Plans

The AT24C16N-10SC-1.8 finds applications in various fields, including:

1. Embedded systems: Used for storing configuration data and firmware updates in microcontrollers.
2. Automotive electronics: Employed for storing critical vehicle parameters and sensor calibration data.
3. Consumer electronics: Utilized in devices such as smart TVs, set-top boxes, and gaming consoles for storing user preferences and settings.

Detailed and Complete Alternative Models

1. AT24C02N-10SC-1.8: A similar EEPROM chip with a smaller storage capacity of 2 kilobits.
2. AT24C64N-10SC-1.8: An alternative model with a larger storage capacity of 64 kilobits.

These alternative models provide options for different storage requirements while maintaining compatibility with the same interface and operating characteristics.

In conclusion, the AT24C16N-10SC-1.8 is an electrically erasable programmable read-only memory (EEPROM) chip that offers non-volatile data storage in a compact form factor. With its high endurance and low power consumption, it finds applications in various fields, including embedded systems, automotive electronics, and consumer electronics. While it